@misc{KayatasBestleBestleetal., author = {Kayatas, Zafer and Bestle, Dieter and Bestle, Pascal and Reick, Robin}, title = {Generation of Realistic Cut-in Maneuvers to Support Safety Assessment of Advanced Driver Assistance Systems}, series = {Applied Mechanics}, volume = {4}, journal = {Applied Mechanics}, number = {4}, issn = {2673-3161}, doi = {10.3390/applmech4040054}, pages = {1066 -- 1077}, language = {en} } @article{EberhardHuBestle, author = {Eberhard, Peter and Hu, B. and Bestle, Dieter}, title = {Longitudinal Wave Propagation in Multiple Impacted Rods}, language = {en} } @article{BestleZahariev, author = {Bestle, Dieter and Zahariev, E.}, title = {Virtual Nonlinear Multibody Systems}, language = {en} } @article{BestleEberhard, author = {Bestle, Dieter and Eberhard, Peter}, title = {Optimization of a Contact Surface}, abstract = {Zhe paper introduces ideas from shape optimization to multibody system dynamics. A disk rolling down a given slope is taken as a simple example, for which it is the goal of the optimization to shape the rolling contour of the disk such that it takes a minimum time to cover a certain distance. The shape of the sontour is described by its radius of curvature. The governing equations of motion result from the kinematics of relative motion and the Nowton-Euler formalism. Three different kinds of spirals are defined and optimized.}, language = {en} } @incollection{BestleGlora, author = {Bestle, Dieter and Glora, Michael}, title = {Optimization of Passive and Active Dynamic Systems}, series = {Virtual nonlinear multibody systems, proceedings of the NATO Advanced Study Institute on Virtual Nonlinear Multibody Systems, Prague, Czech Republic, 23 June - 3 July 2002}, booktitle = {Virtual nonlinear multibody systems, proceedings of the NATO Advanced Study Institute on Virtual Nonlinear Multibody Systems, Prague, Czech Republic, 23 June - 3 July 2002}, editor = {Schiehlen, Werner}, publisher = {Kluwer}, address = {Dordrecht [u.a.]}, isbn = {1-402-01339-6}, language = {en} } @incollection{Bestle, author = {Bestle, Dieter}, title = {Optimization of Dynamic Systems with Respect to Contact Surfaces}, language = {en} } @article{BestleWachal, author = {Bestle, Dieter and Wachal, Andrej}, title = {Multi-criterion Optimization of a Pneumatic Vibroinsulation System}, language = {en} } @article{BestleKeskin, author = {Bestle, Dieter and Keskin, Akin}, title = {Verbesserter Designprozess f{\"u}r moderne Hochdruckverdichter}, language = {de} } @inproceedings{KeskinBestle, author = {Keskin, Akin and Bestle, Dieter}, title = {Application of Multi-objective Optimization to Axial Compressor Preliminary Design}, language = {en} } @incollection{Bestle, author = {Bestle, Dieter}, title = {Design of a Laboratory Crane for Testing Control Approaches}, series = {IUTAM Symposium on Vibration Control of Nonlinear Mechanisms and Structures, proceedings of the IUTAM symposium held in Munich, Germany, 18-22 July 2005}, booktitle = {IUTAM Symposium on Vibration Control of Nonlinear Mechanisms and Structures, proceedings of the IUTAM symposium held in Munich, Germany, 18-22 July 2005}, editor = {Ulbrich, Heinz}, publisher = {Springer}, address = {Dordrecht [u.a.]}, isbn = {1-4020-4160-8}, pages = {101 -- 110}, language = {en} } @article{Bestle, author = {Bestle, Dieter}, title = {Optimierung der Kontaktgeometrie einer Ringplattform}, language = {de} } @incollection{NowickiBestleStrasser, author = {Nowicki, Daniel and Bestle, Dieter and Strasser, G.}, title = {Empfindlichkeitsuntersuchung von Kraftfahrzeugen auf bremserregte Lenkraddrehschwingungen (LDS) mit Hilfe eines Komplettfahrzeugpr{\"u}fstands}, language = {de} } @inproceedings{BeffingerBestle, author = {Beffinger, Marcin and Bestle, Dieter}, title = {Design of Progressive Shock Absorber}, language = {en} } @inproceedings{WachalBestle, author = {Wachal, Andrej and Bestle, Dieter}, title = {Use of Air Spring Elements for Vibration Insulation}, series = {Proceedings, Fifth EUROMECH Nonlinear Dynamics Conference, August 7 - 12, 2005, Eindhoven University of Technology}, booktitle = {Proceedings, Fifth EUROMECH Nonlinear Dynamics Conference, August 7 - 12, 2005, Eindhoven University of Technology}, publisher = {Univ. of Technology}, address = {Eindhoven}, isbn = {90-386-2667-3}, pages = {578 -- 585}, language = {en} } @inproceedings{KeskinDuttaBestle, author = {Keskin, Akin and Dutta, Amit Kumar and Bestle, Dieter}, title = {Modern Compressor Aerodynamic Blading Process using Multi-objective Optimization}, series = {Proceedings of the ASME Turbo Expo 2006, presented at the 2006 ASME Turbo Expo, May 6 - 11, 2006, Barcelona, Spain, Vol. 6, Part B}, booktitle = {Proceedings of the ASME Turbo Expo 2006, presented at the 2006 ASME Turbo Expo, May 6 - 11, 2006, Barcelona, Spain, Vol. 6, Part B}, publisher = {ASME}, address = {New York, NY}, isbn = {0-7918-4241-X}, pages = {1209 -- 1216}, language = {en} } @inproceedings{KeskinDuttaBestle, author = {Keskin, Akin and Dutta, Amit Kumar and Bestle, Dieter}, title = {Alternative Approach for Solving a Multi-Objective Optimization Problem in Aerodynamic Compressor Blade Design}, language = {en} } @article{KeskinBestle, author = {Keskin, Akin and Bestle, Dieter}, title = {Application of Multi-objective Optimization to Axial Compressor Preliminary Design}, series = {Aerospace science and technology}, volume = {10}, journal = {Aerospace science and technology}, number = {7}, issn = {0034-1223}, pages = {581 -- 589}, language = {en} } @misc{SwobodaHuppertzBestle, author = {Swoboda, Marius and Huppertz, Andr{\´e} and Bestle, Dieter}, title = {Multidisziplinary Compressor Blading Design Process using Automation and Multi-Objective Optimization}, language = {en} } @inproceedings{OttoBestle, author = {Otto, Dierk and Bestle, Dieter}, title = {Automation and Optimisation of Compressor Blade Design with respect to Mechanical Criteria}, series = {Deutscher Luft- und Raumfahrtkongress 2006, Braunschweig, 06. bis 09. November 2006, Bd. 2}, booktitle = {Deutscher Luft- und Raumfahrtkongress 2006, Braunschweig, 06. bis 09. November 2006, Bd. 2}, publisher = {DGLR}, address = {Bonn}, pages = {1209 -- 1214}, language = {en} } @incollection{Bestle, author = {Bestle, Dieter}, title = {Strategien der Mehrkriterien-Optimierung}, language = {de} } @incollection{EberhardBestle, author = {Eberhard, Peter and Bestle, Dieter}, title = {Computer-Aided Optimization of Mechanical Systems}, language = {en} } @inproceedings{OttoBestle, author = {Otto, Dierk and Bestle, Dieter}, title = {Multi-Disciplinary Blading Design by Means of Multi-Objective Optimisation}, language = {en} } @inproceedings{DuttaFlassigBestle, author = {Dutta, Amit Kumar and Flassig, Peter Michael and Bestle, Dieter}, title = {Multi-Objective Blade Design using a Quasi-3D Non-Dimensional Parameterization Approach}, language = {en} } @inproceedings{Bestle, author = {Bestle, Dieter}, title = {Optimization of a Platform with respect to Force Contact Conditions}, language = {en} } @inproceedings{DuttaFlassigBestle, author = {Dutta, Amit Kumar and Flassig, Peter Michael and Bestle, Dieter}, title = {A Non-Dimensional Quasi-3D Blade Design approach with respect to Aerodynamic Criteria}, series = {Proceedings of the ASME Turbo Expo 2008, presented at the 2008 ASME Turbo Expo, June 9 - 13, 2008, Berlin, Germany, Vol 6., Part C}, booktitle = {Proceedings of the ASME Turbo Expo 2008, presented at the 2008 ASME Turbo Expo, June 9 - 13, 2008, Berlin, Germany, Vol 6., Part C}, publisher = {ASME}, address = {New York, NY}, isbn = {978-0-7918-4316-1}, pages = {2445 -- 2455}, language = {en} } @inproceedings{KeskinSwobodaFlassigetal., author = {Keskin, Akin and Swoboda, Marius and Flassig, Peter Michael and Dutta, Amit Kumar and Bestle, Dieter}, title = {Accelerated Industrial Blade Design Based on Multi-Objective Optimization Using Surrogate Model Methodology}, series = {Proceedings of the ASME Turbo Expo 2008, presented at the 2008 ASME Turbo Expo, June 9 - 13, 2008, Berlin, Germany, Vol 6., Part C}, booktitle = {Proceedings of the ASME Turbo Expo 2008, presented at the 2008 ASME Turbo Expo, June 9 - 13, 2008, Berlin, Germany, Vol 6., Part C}, publisher = {ASME}, address = {New York, NY}, isbn = {978-0-7918-4316-1}, pages = {2339 -- 2349}, language = {en} } @incollection{FunkeBestle, author = {Funke, Torsten and Bestle, Dieter}, title = {Modellierung, Parameteridentifikation und Simulation passiver Fahrzeugstoßd{\"a}mpfer}, language = {de} } @article{NguyenBestle, author = {Nguyen, Tuan-Anh and Bestle, Dieter}, title = {Application of Optimization Methods to Controller Design doe Active Suspensions}, language = {en} } @inproceedings{KeskinBestle, author = {Keskin, Akin and Bestle, Dieter}, title = {A Method for Using Multi-objective Optimization within the Rolls-Royce meanline Prediction Process}, language = {en} } @inproceedings{FlassigDuttaBestle, author = {Flassig, Peter Michael and Dutta, Amit Kumar and Bestle, Dieter}, title = {Robustheits- und zuverl{\"a}ssigkeitsbasierte Mehrkriterien-Optimierung von Verdichterschaufeln}, language = {de} } @inproceedings{DuttaFlassigBestleetal., author = {Dutta, Amit Kumar and Flassig, Peter Michael and Bestle, Dieter and Keskin, Akin and Swoboda, Marius}, title = {Validierung optimierter Verdichterschaufeln mit Hilfe der 3D-CFD}, series = {Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008, Bd. 2}, booktitle = {Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008, Bd. 2}, publisher = {Dt. Ges. f{\"u}r Luft- und Raumfahrt}, address = {Bonn}, pages = {1023 -- 1033}, language = {de} } @inproceedings{FlassigDuttaBestle, author = {Flassig, Peter Michael and Dutta, Amit Kumar and Bestle, Dieter}, title = {Robuste Auslegung von Verdichterschaufeln}, series = {Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008, Bd. 2}, booktitle = {Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008, Bd. 2}, publisher = {Dt. Ges. f{\"u}r Luft- und Raumfahrt}, address = {Bonn}, pages = {1001 -- 1010}, language = {de} } @inproceedings{SommerFlassigDuttaetal., author = {Sommer, Lars and Flassig, Peter Michael and Dutta, Amit Kumar and Bestle, Dieter}, title = {Kr{\"u}mmungs-Nebenbedingungen in der aerodynamischen Mehrkriterien-Optimierung von Verdichterschaufelprofilen}, series = {Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008, Bd. 2}, booktitle = {Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008, Bd. 2}, publisher = {Dt. Ges. f{\"u}r Luft- und Raumfahrt}, address = {Bonn}, pages = {1011 -- 1022}, language = {de} } @inproceedings{DuttaFlassigBestle, author = {Dutta, Amit Kumar and Flassig, Peter Michael and Bestle, Dieter}, title = {Validation of Q3D-Blade Optimisation Results by 3D-CFD}, language = {en} } @inproceedings{HinzBestle, author = {Hinz, Michel and Bestle, Dieter}, title = {A Topology Homogenisation Approach for Parameterising Compressors with Different Number of Stages within the Preliminary Meanline Design Process}, language = {en} } @inproceedings{SommerBestle, author = {Sommer, Lars and Bestle, Dieter}, title = {Speeding-up 2D Aerofoil Design by Using Curvature Constraints}, language = {en} } @inproceedings{FlassigDuttaBestle, author = {Flassig, Peter Michael and Dutta, Amit Kumar and Bestle, Dieter}, title = {Robustheit und Zuverl{\"a}ssigkeit in der aerodynamischen Verdichterauslegung}, language = {de} } @inproceedings{BestleKeskinOtto, author = {Bestle, Dieter and Keskin, Akin and Otto, Dierk}, title = {Process Integration and Automation for optimal Design}, language = {en} } @inproceedings{DuttaFlassigOttoetal., author = {Dutta, Amit Kumar and Flassig, Peter Michael and Otto, Dierk and Bestle, Dieter}, title = {Process Integration for Multidisciplinary Multi-objective Blade Design}, language = {en} } @misc{SwobodaHuppertzKeskinetal., author = {Swoboda, Marius and Huppertz, Andr{\´e} and Keskin, Akin and Otto, Dierk and Bestle, Dieter}, title = {Multidisciplinary Compressor Blading Design Process using Automation and Multi-Objective optimization}, language = {en} } @article{Bestle, author = {Bestle, Dieter}, title = {Optimization of a Platform with respect to Force Contact Conditions}, series = {Journal of computational and nonlinear dynamics}, volume = {3}, journal = {Journal of computational and nonlinear dynamics}, number = {4}, issn = {1555-1423}, pages = {8}, language = {en} } @inproceedings{KeskinSwobodaFlassigetal., author = {Keskin, Akin and Swoboda, Marius and Flassig, Peter Michael and Dutta, Amit Kumar and Bestle, Dieter}, title = {New Optimization Strategy for Rapid industrial Blade Design}, language = {en} } @inproceedings{HinzBestle, author = {Hinz, Michel and Bestle, Dieter}, title = {Implementation of Individual iSIGHT-FD Components for Process Acceleration by Wrapping of FORTRAN-Routines}, language = {en} } @misc{BestleHinzRuehle, author = {Bestle, Dieter and Hinz, Michel and R{\"u}hle, Tobias}, title = {Unterst{\"u}tzende Strategien f{\"u}r den robusten Triebwerksentwurf - Durch Prozessintegration, problemspezifische Parametrisierung und Mehrkriterien-Optimierung zum Erfolg}, language = {de} } @inproceedings{FlassigBestle, author = {Flassig, Peter Michael and Bestle, Dieter}, title = {Probabilistische Studien zur robusten aerodynamischen Verdichterauslegung}, language = {de} } @inproceedings{SchulzBestle, author = {Schulz, Anatol and Bestle, Dieter}, title = {Acceleration of Compressor Blade Structural Design Process by Direct Use of Efficient 3D Aerofoil Parameterisation and Shell Elements}, language = {en} } @incollection{FunkeBestle, author = {Funke, Torsten and Bestle, Dieter}, title = {Entwicklung eines physikalischen D{\"a}mpfermodells zur Analyse und Optimierung des Fahrverhaltens}, language = {de} } @incollection{KahlbauBestleMatthies, author = {Kahlbau, Sebastian and Bestle, Dieter and Matthies, Felix}, title = {Mehrkriterielle Optimierung des Schaltablaufs von Automatikgetrieben}, language = {de} } @inproceedings{RuehleBestle, author = {R{\"u}hle, Tobias and Bestle, Dieter}, title = {Ein Verfahren zur optimalen Hochdruckverdichterauslegung auf Basis der Meridianstr{\"o}mungsrechnung}, series = {Deutscher Luft- und Raumfahrtkongress 2010, Hamburg, 31. August - 2. September 2010, Tagungsband}, booktitle = {Deutscher Luft- und Raumfahrtkongress 2010, Hamburg, 31. August - 2. September 2010, Tagungsband}, publisher = {DGLR}, address = {Bonn}, pages = {327 -- 336}, language = {de} } @misc{SommerBestle, author = {Sommer, Lars and Bestle, Dieter}, title = {Curvature driven two-dimensional multi-objective optimization of compressor blade sections}, series = {Aerospace Science and Technology}, volume = {15}, journal = {Aerospace Science and Technology}, number = {4}, issn = {0034-1223}, pages = {334 -- 342}, language = {en} } @inproceedings{DuttaBestle, author = {Dutta, Amit Kumar and Bestle, Dieter}, title = {Design Process for Optimal Stacking of Q3D-Optimised Compressor Blades}, language = {en} } @inproceedings{FlassigBestle, author = {Flassig, Peter Michael and Bestle, Dieter}, title = {Robust 2D Compressor Blading with respect to Measured Manufacturing Uncertainties}, language = {en} } @inproceedings{SchulzBestle, author = {Schulz, Anatol and Bestle, Dieter}, title = {Structural Design Process Acceleration by Direct Use of Aerodynamic Q3D-Blading Results and Shell-Elements}, language = {en} } @inproceedings{BestleFlassig, author = {Bestle, Dieter and Flassig, Peter Michael}, title = {Optimal Aerodynamic Compressor Blade Design Considering Manufacturing Noise}, language = {en} } @inproceedings{PoehlmannKargerJankeetal., author = {P{\"o}hlmann, Fiete and Karger, Kai and Janke, Christian and Angersbach, Andreas and Amtsfeld, Philipp and Albert, Moritz and Gaun, Lilia and Bestle, Dieter}, title = {VIT 3 - Extended Design Processes Using Synergy Effects from Previous Virtual Turbo-Engine Projects}, language = {en} } @inproceedings{RuehleBestle, author = {R{\"u}hle, Tobias and Bestle, Dieter}, title = {Compressor Design and Optimisation Based on Throughflow Calculation}, language = {en} } @inproceedings{BuschBestle, author = {Busch, Jochen and Bestle, Dieter}, title = {Optimization of a new steering strategy to improve the driving behavior of cars}, series = {Proceedings of the 7th European Nonlinear Dynamics Conference (ENOC 2011), Roma, July 24 - 27, 2011}, booktitle = {Proceedings of the 7th European Nonlinear Dynamics Conference (ENOC 2011), Roma, July 24 - 27, 2011}, isbn = {978-88-906234-0-0}, pages = {S. 148}, language = {en} } @inproceedings{AmtsfeldBestle, author = {Amtsfeld, Philipp and Bestle, Dieter}, title = {Mehrkriterienoptimierung von 2D-Turbinenschaufelprofilen}, language = {de} } @misc{AmtsfeldBestle, author = {Amtsfeld, Philipp and Bestle, Dieter}, title = {Automatic Aerodynamic Optimisation Process for Turbine Blade Section Design}, abstract = {9th Automatic Design and Optimisation Seminar (ADOS 2011), 28.09.-29.09.2011, Derby}, language = {en} } @misc{RoggeHentschelAmtsfeldetal., author = {Rogge, Stephan and Hentschel, Christian and Amtsfeld, Philipp and Bestle, Dieter and Meyer, Marcus and Edwards, Paul}, title = {Interactive Blade Modification in Para View Connected to Rapid GPU Flow Simulation}, abstract = {9th Automatic Design and Optimisation Seminar (ADOS 2011), 28.09.-29.09.2011, Derby}, language = {en} } @inproceedings{KupijaiBestleKickenweitz, author = {Kupijai, Philipp and Bestle, Dieter and Kickenweitz, D.}, title = {Automation of the Preliminary Engine Performance Design Process}, language = {en} } @inproceedings{LockanBestle, author = {Lockan, Michael and Bestle, Dieter}, title = {Robustheitsaspekte in verteilten Entwicklungsumgebungen}, series = {4. Dresdener Probabilistik Workshop, 06.10. - 07.10.2011, Dresden}, booktitle = {4. Dresdener Probabilistik Workshop, 06.10. - 07.10.2011, Dresden}, pages = {16}, language = {de} } @inproceedings{KupijaiBestle, author = {Kupijai, Philipp and Bestle, Dieter}, title = {Beschleunigung der Triebwerksauslegung durch Verwendung problemangepasster Isight-Komponenten}, language = {de} } @inproceedings{BestleFlassigDutta, author = {Bestle, Dieter and Flassig, Peter Michael and Dutta, Amit Kumar}, title = {Robust Design of Compressor Blades in the Presence of Manufacturing Noise}, series = {9th European Conference on turbomachinery, fluid dynamics and thermodynamics, Conference Proceedings, Vol. 1}, booktitle = {9th European Conference on turbomachinery, fluid dynamics and thermodynamics, Conference Proceedings, Vol. 1}, editor = {Sen, M.}, isbn = {978-975-561-390-1}, pages = {1303 -- 1314}, language = {en} } @inproceedings{DjukicBestle, author = {Djukic, Daniel and Bestle, Dieter}, title = {Optimization of Damping Characteristics for Improved Vehicle ride and Handling}, series = {19th International Conference on Computer Methods in Mechanics, Warschau, 2011}, booktitle = {19th International Conference on Computer Methods in Mechanics, Warschau, 2011}, language = {en} } @inproceedings{WolterKahlbauBestleetal., author = {Wolter, Thiess Magnus and Kahlbau, Sebastian and Bestle, Dieter and Liebezeit, Thomas}, title = {Guided Transmission Calibration Using the Example of AT}, language = {en} } @misc{KahlbauBestle, author = {Kahlbau, Sebastian and Bestle, Dieter}, title = {Optimal Shift Control for Automatic Transmission}, series = {Mechanics Based Design of Structures and Machines}, volume = {41}, journal = {Mechanics Based Design of Structures and Machines}, number = {3}, issn = {1539-7742}, pages = {259 -- 273}, language = {en} } @inproceedings{BestleFunke, author = {Bestle, Dieter and Funke, Torsten}, title = {Physically Motivated Modelling and Identification of Advanced Vehicle Shock Absorbers}, series = {The 2nd Joint International Conference on Multibody System Dynamics, Proceedings of IMSD 2012, Stuttgart, 28.05. - 01.06.2012}, booktitle = {The 2nd Joint International Conference on Multibody System Dynamics, Proceedings of IMSD 2012, Stuttgart, 28.05. - 01.06.2012}, publisher = {Univ. Stuttgart, Inst. f{\"u}r Technische und Numerische Mechanik}, address = {Stuttgart}, isbn = {978-3-927618-32-9}, language = {en} } @inproceedings{AjalaBestleRauhetal., author = {Ajala, Oussama and Bestle, Dieter and Rauh, Jochen and Rieger, Karl-Josef}, title = {Two-degree-of-freedom Control Approach for an Active Suspension System}, series = {The 2nd Joint International Conference on Multibody System Dynamics, Proceedings of IMSD 2012, Stuttgart, 28.05. - 01.06.2012}, booktitle = {The 2nd Joint International Conference on Multibody System Dynamics, Proceedings of IMSD 2012, Stuttgart, 28.05. - 01.06.2012}, publisher = {Univ. Stuttgart, Inst. f{\"u}r Technische und Numerische Mechanik}, address = {Stuttgart}, isbn = {978-3-927618-32-9}, language = {en} } @inproceedings{MeyerSwobodaRoggeetal., author = {Meyer, Marcus and Swoboda, Marius and Rogge, Stephan and Amtsfeld, Philipp and Hentschel, Christian and Bestle, Dieter}, title = {Interactive Aerodynamic Design in a Virtual Environment}, series = {HPCN-Workshop 2012, Braunschweig am 9./10. Mai 2012}, booktitle = {HPCN-Workshop 2012, Braunschweig am 9./10. Mai 2012}, pages = {20}, language = {en} } @inproceedings{LockanBestle, author = {Lockan, Michael and Bestle, Dieter}, title = {A Concept for Collaborative Design and Distributed Optimisation}, series = {5th IC-SCCE International Conference: From Scientific Computing to Computational Engineering, Athen, 2012}, booktitle = {5th IC-SCCE International Conference: From Scientific Computing to Computational Engineering, Athen, 2012}, isbn = {978-960-98941-9-7}, abstract = {The paper shows a methodology for designing a complex system in a collaborative design environment by sharing information on autonomous subsystems and coupling parameters. Collaborative design is a current issue in aviation industry where intellectual property rights of individual companies prohibit a common evaluation model. State of the art approaches based on nested local optimisation loops are not sufficient if time-consuming component analyses are involved. A new approach for collaborative design is developed where the overall optimisation of a complex system is split into subsystem optimisation problems. Coupling parameters are treated as local design variables and only optimal coupling parameters are exchanged regularly. Application to a test example shows a huge time reduction and improved probability for finding the global optimum. Advantages are also demonstrated for an industrial design task.}, language = {en} } @inproceedings{RoggeAmtsfeldHentscheletal., author = {Rogge, Stephan and Amtsfeld, Philipp and Hentschel, Christian and Bestle, Dieter and Meyer, Marcus}, title = {Using gestures to interactively modify turbine blades in a Virtual Environment}, series = {Emerging Signal Processing Applications (ESPA), 2012 IEEE International Conference, Las Vegas, 12 - 14 Jan. 2012}, booktitle = {Emerging Signal Processing Applications (ESPA), 2012 IEEE International Conference, Las Vegas, 12 - 14 Jan. 2012}, publisher = {IEEE}, isbn = {978-1-4673-0899-1}, pages = {155 -- 158}, language = {en} } @inproceedings{SchoernerBestle, author = {Sch{\"o}rner, Roman and Bestle, Dieter}, title = {Coupled Optimization of Compressor Blade Roots and Rotor Grooves for Industrial Gas-Turbines}, series = {5th IC-SCCE International Conference: From Scientific Computing to Computational Engineering}, booktitle = {5th IC-SCCE International Conference: From Scientific Computing to Computational Engineering}, isbn = {978-960-98941-9-7}, abstract = {Substituting an intuitive human design search by an automated design process for compressor blade roots and rotor grooves driven by numerical optimization. The design of industrial gas turbines is a highly complex task where the engineer typically run a lot of design cases intuitively and manually in order to find only acceptable design solution which is usually a time consuming procedure. Research project funded by Alstom, Switzerland. The research shows the benefit of applying optimization methods to an industrial design process.}, language = {en} } @inproceedings{KargerBestle, author = {Karger, Kai and Bestle, Dieter}, title = {Multi-Objective Blisk-Optimisation Taking into Account Environmental Influences}, series = {5th IC-SCCE International Conference: From Scientific Computing to Computational Engineering, Athen, 2012}, booktitle = {5th IC-SCCE International Conference: From Scientific Computing to Computational Engineering, Athen, 2012}, isbn = {978-960-98941-9-7}, abstract = {A design change from bladed disk to blisk leads to stronger endurance limits. The paper deals with aerofoil adaption of a blisk within a multi-criterion optimisation loop. Blisks are more sensitive to external excitation since mechanical damping is very low. Thus stronger limits have to be applied which are hard to be fulfilled and hence it requires the use of numerical optimisation. Combination of 2D CFD and FEM in a common optimisation loop to re-design a given blisk. Determination of relevant features for improving blisk endurance. Modern process integration and multi-criterion optimisation tools in combination with today's increased computational power allow to perform mulitphysics design even in the case of complex industrial design tasks.}, language = {en} } @inproceedings{GaunHuppertzBestle, author = {Gaun, Lilia and Huppertz, Andr{\´e} and Bestle, Dieter}, title = {Heiß-Kalt-Geometrietransformation von Triebwerkskomponenten auf der Grundlage von FE-Berechnungen und NURBS-Transformationen}, series = {Deutscher Luft- und Raumfahrtkongress 2012, Berlin}, booktitle = {Deutscher Luft- und Raumfahrtkongress 2012, Berlin}, publisher = {Deutsche Gesellschaft f{\"u}r Luft- und Raumfahrt - Lilienthal-Oberth e.V.}, address = {Bonn}, url = {http://nbn-resolving.de/urn:nbn:de:101:1-201210269093}, pages = {9}, language = {de} } @inproceedings{BuschBestle, author = {Busch, Jochen and Bestle, Dieter}, title = {Robust All Wheel Steering Design Strategy for Improving Drivability of Passenger Cars}, series = {Proceedings of the ASME 5th Annual Dynamic Systems and Control Division conference and JSME 11th Motion and Vibration Conference, October 17 - 19, Fort Lauderdale, Florida, USA, Vol. 1}, booktitle = {Proceedings of the ASME 5th Annual Dynamic Systems and Control Division conference and JSME 11th Motion and Vibration Conference, October 17 - 19, Fort Lauderdale, Florida, USA, Vol. 1}, publisher = {ASME}, address = {New York, NY}, isbn = {978-0-7918-4529-5}, pages = {847 -- 856}, language = {en} } @misc{AmtsfeldBestleMeyer, author = {Amtsfeld, Philipp and Bestle, Dieter and Meyer, Marcus}, title = {Direct 3D Aerodynamic Optimization of Turbine Blades with GPU-accelerated CFD}, series = {Extended Abstracts Book, Evolutionary and Deterministic Methods for Design, Optimization and Control with Application to Industrial and Societal Problems, Las Palmas de Gran Canaria, 7.-9.10.2013}, journal = {Extended Abstracts Book, Evolutionary and Deterministic Methods for Design, Optimization and Control with Application to Industrial and Societal Problems, Las Palmas de Gran Canaria, 7.-9.10.2013}, editor = {Greiner, David and Galv{\´a}n, Blas and Periaux, Jacques and Gauger, Nicolas R. and Giannakoglou, Kyriakos C. and Winter, G.}, publisher = {Universidad de Las Palmas de Gran Canaria}, address = {Las Palmas de Gran Canaria}, isbn = {978-84-616-6249-4}, language = {en} } @inproceedings{AlbertBestle, author = {Albert, Moritz and Bestle, Dieter}, title = {Aerodynamic Design Optimization of Nacelle and Intake}, series = {ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, San Antonio, Texas, USA, June 3-7, 2013, Vol. 2}, booktitle = {ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, San Antonio, Texas, USA, June 3-7, 2013, Vol. 2}, publisher = {ASME}, address = {New York}, isbn = {978-0-7918-5516-4}, pages = {8}, language = {en} } @inproceedings{KargerBestle, author = {Karger, Kai and Bestle, Dieter}, title = {Parametric Blending and FE-Optimisation of a Compressor Blisk Test Case}, series = {Extended Abstracts Book, Evolutionary and Deterministic Methods for Design, Optimization and Control with Application to Industrial and Societal Problems, Las Palmas de Gran Canaria, 7.-9.10.2013}, booktitle = {Extended Abstracts Book, Evolutionary and Deterministic Methods for Design, Optimization and Control with Application to Industrial and Societal Problems, Las Palmas de Gran Canaria, 7.-9.10.2013}, editor = {Greiner, David and Galv{\´a}n, Blas and Periaux, Jacques and Gauger, Nicolas R. and Giannakoglou, Kyriakos C. and Winter, G.}, publisher = {Universidad de Las Palmas de Gran Canaria}, address = {Las Palmas de Gran Canaria}, isbn = {978-84-616-6249-4}, language = {en} } @inproceedings{PoehlmannBestleFlassigetal., author = {P{\"o}hlmann, Fiete and Bestle, Dieter and Flassig, Peter Michael and Hinz, Mich{\`e}l}, title = {Modular Automated Aerodynamic Compressor Design Process}, series = {Extended Abstracts Book, Evolutionary and Deterministic Methods for Design, Optimization and Control with Application to Industrial and Societal Problems, Las Palmas de Gran Canaria, 7.-9.10.2013}, booktitle = {Extended Abstracts Book, Evolutionary and Deterministic Methods for Design, Optimization and Control with Application to Industrial and Societal Problems, Las Palmas de Gran Canaria, 7.-9.10.2013}, editor = {Greiner, David and Galv{\´a}n, Blas and Periaux, Jacques and Gauger, Nicolas R. and Giannakoglou, Kyriakos C. and Winter, G.}, publisher = {Universidad de Las Palmas de Gran Canaria}, address = {Las Palmas de Gran Canaria}, isbn = {978-84-616-6249-4}, language = {en} } @misc{BuschBestle, author = {Busch, Jochen and Bestle, Dieter}, title = {Optimisation of lateral car dynamics taking into account parameter uncertainties}, series = {Vehicle System Dynamics}, volume = {52}, journal = {Vehicle System Dynamics}, number = {2}, issn = {1744-5159}, pages = {166 -- 185}, abstract = {Simulation studies on an active all-wheel-steering car show that disturbance of vehicle parameters have high influence on lateral car dynamics. This motivates the need of robust design against such parameter uncertainties. A specific parametrisation is established combining deterministic, velocity dependent steering control parameters with partly uncertain, velocity independent vehicle parameters for simultaneous use in a numerical optimisation process. Model-based objectives are formulated and summarized in a multi-objective optimisation problem where especially the lateral steady state behaviour is improved by an adaption strategy based on measurable uncertainties. The normally distributed uncertainties are generated by optimal Latin hypercube sampling and a response surface based strategy helps to cut down time consuming model evaluations which offers the possibility to use a genetic optimisation algorithm. Optimisation results are discussed in different criterion spaces and the achieved improvements confirm the validity of the proposed procedure.}, language = {en} } @inproceedings{AlbertBestle, author = {Albert, Moritz and Bestle, Dieter}, title = {Automatic Design Evaluation of Nacelle Geometry Using 3D-CFD}, series = {15th AIAA/ISSMO Multidisziplinary Analysis and Optimization Conference, AIAA 2014-2039, Atlanta, 2014}, booktitle = {15th AIAA/ISSMO Multidisziplinary Analysis and Optimization Conference, AIAA 2014-2039, Atlanta, 2014}, isbn = {978-1-62410-283-7}, doi = {10.2514/6.2014-2039}, language = {en} } @inproceedings{AmtsfeldLockanBestleetal., author = {Amtsfeld, Philipp and Lockan, Michael and Bestle, Dieter and Meyer, Markus}, title = {Accelerated 3D Aerodynamic Optimization of Gas Turbine Blades}, series = {ASME Turbo Expo 2014, Turbine Technical Conference and Exposition, Volume 2B: Turbomachinery, D{\"u}sseldorf, Germany, June 16-20, 2014}, booktitle = {ASME Turbo Expo 2014, Turbine Technical Conference and Exposition, Volume 2B: Turbomachinery, D{\"u}sseldorf, Germany, June 16-20, 2014}, publisher = {ASME}, address = {New York, NY}, isbn = {978-0-7918-4561-5}, pages = {9}, language = {en} } @inproceedings{GaunHuppertzBestle, author = {Gaun, Lilia and Huppertz, Andr{\´e} and Bestle, Dieter}, title = {Hot-to-Cold CAD Geometry Transformation of Aero Engine Parts Based on B-Spline Morphing}, series = {ASME Turbo Expo 2014, Turbine Technical Conference and Exposition, Volume 2B: Turbomachinery, D{\"u}sseldorf, Germany, June 16-20, 2014}, booktitle = {ASME Turbo Expo 2014, Turbine Technical Conference and Exposition, Volume 2B: Turbomachinery, D{\"u}sseldorf, Germany, June 16-20, 2014}, publisher = {ASME}, address = {New York, NY}, isbn = {978-0-7918-4561-5}, pages = {12}, language = {en} } @inproceedings{JankeKargerGaunetal., author = {Janke, Christian and Karger, Kai and Gaun, Lilia and Bestle, Dieter and Huppertz, Andr{\´e}}, title = {3D CFD Compressor Map Computation Process Accounting for Geometry Changes due to Off-Design Operation Loads}, series = {ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Volume 2B: Turbomachinery, D{\"u}sseldorf, Germany, June 16-20, 2014}, booktitle = {ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Volume 2B: Turbomachinery, D{\"u}sseldorf, Germany, June 16-20, 2014}, publisher = {ASME}, address = {New York, NY}, isbn = {978-0-7918-4561-5}, pages = {12}, language = {en} } @inproceedings{PoehlmannBestle, author = {P{\"o}hlmann, Fiete and Bestle, Dieter}, title = {Contradictory Integer Objective Approaches for Mixed-variables Evolutionary Optimization Problems}, series = {International Conference on Engineering and Applied Sciences Optimization (OPT-i), Kos, Griechenland, 2014}, booktitle = {International Conference on Engineering and Applied Sciences Optimization (OPT-i), Kos, Griechenland, 2014}, isbn = {978-960-99994-5-8}, language = {en} } @inproceedings{AngersbachBestle, author = {Angersbach, Andreas and Bestle, Dieter}, title = {Optimization of Air Distribution in a Preliminary Design Stage of an Aero-Engine Combustor}, series = {14th AIAA Aviation Technology, Integration, and Operations Conference, Atlanta, 2014}, booktitle = {14th AIAA Aviation Technology, Integration, and Operations Conference, Atlanta, 2014}, isbn = {978-1-62410-282-0}, doi = {10.2514/MATIO14}, language = {en} } @inproceedings{LockanAmtsfeldBestleetal., author = {Lockan, Michael and Amtsfeld, Philipp and Bestle, Dieter and Meyer, Marcus}, title = {Non-Linear Sensitivity Analysis Based on Regression Trees with Apllication to 3D Aerodynamic Optimization of Gas Turbine Blades}, series = {International Conference on Engineering and Applied Scieces Optimization (OPT-i), Kos, Griechenland, 2014}, booktitle = {International Conference on Engineering and Applied Scieces Optimization (OPT-i), Kos, Griechenland, 2014}, isbn = {978-960-99994-5-8}, language = {en} } @misc{BestleAbbasRui, author = {Bestle, Dieter and Abbas, Laith K. and Rui, Xiaoting}, title = {Recursive eigenvalue search algorithm for transfer matrix method of linear flexible multibody systems}, series = {Multibody System Dynamics}, volume = {32}, journal = {Multibody System Dynamics}, number = {4}, issn = {1573-272X}, doi = {10.1007/s11044-013-9399-y}, pages = {429 -- 444}, language = {en} } @misc{AjalaBestleRauh, author = {Ajala, Oussama and Bestle, Dieter and Rauh, Jochen}, title = {Modeling and Control of an Electro-Hydraulic Active Suspension System}, series = {Archive of Mechanical Engineering}, volume = {60}, journal = {Archive of Mechanical Engineering}, number = {1}, issn = {0004-0738}, pages = {37 -- 54}, language = {en} } @misc{BestleFunke, author = {Bestle, Dieter and Funke, Torsten}, title = {Physics Based Model of a Stroke-dependent Shock Absorber}, series = {Multibody System Dynamics}, volume = {30}, journal = {Multibody System Dynamics}, number = {2}, issn = {1573-272X}, pages = {221 -- 232}, language = {en} } @inproceedings{KupijaiBestleKickenweitz, author = {Kupijai, Philipp and Bestle, Dieter and Kickenweitz, D.}, title = {System Integration as Key for Improving and Speeding up the Preliminary Design Phase of Aero Engines}, series = {Abstracts, Simulia community conference proceedings, May 22-24, 2013, Vienna, Austria,}, booktitle = {Abstracts, Simulia community conference proceedings, May 22-24, 2013, Vienna, Austria,}, pages = {10 -- 11}, language = {en} } @inproceedings{AngersbachBestleEggels, author = {Angersbach, Andreas and Bestle, Dieter and Eggels, Ruud}, title = {Automated Combustor Preliminary Design Using Tools of Different Fidelity}, series = {Proceedings of ASME Turbo Expo 2013, San Antonio, Texas, USA , June 3-7, 2013, Volume 1A: Combustion, Fuels and Emissions, Paper GT2013-94411}, booktitle = {Proceedings of ASME Turbo Expo 2013, San Antonio, Texas, USA , June 3-7, 2013, Volume 1A: Combustion, Fuels and Emissions, Paper GT2013-94411}, publisher = {ASME}, address = {New York}, isbn = {978-0-7918-5510-2}, pages = {8}, language = {en} } @inproceedings{BestleRui, author = {Bestle, Dieter and Rui, Xiaoting}, title = {Application of the Transfer Matrix Method to Control Problems}, series = {ECCOMAS Thematic Conference on Multibody Dynamics 2013, Zagreb, Croatia, July 1 - 4, 2013}, booktitle = {ECCOMAS Thematic Conference on Multibody Dynamics 2013, Zagreb, Croatia, July 1 - 4, 2013}, editor = {Terze, Zdravko}, address = {Zagreb}, pages = {259 -- 268}, language = {en} } @inproceedings{RuiBestleZhang, author = {Rui, Xiaoting and Bestle, Dieter and Zhang, Jianshu}, title = {A New Form of the Discrete Time Transfer Matrix Method for Multibody Systems}, series = {ECCOMAS Thematic Conference on Multibody Dynamics 2013, Zagreb, Croatia, July 1 - 4, 2013}, booktitle = {ECCOMAS Thematic Conference on Multibody Dynamics 2013, Zagreb, Croatia, July 1 - 4, 2013}, editor = {Terze, Zdravko}, address = {Zagreb}, pages = {643 -- 654}, language = {en} } @inproceedings{AbbasBestleRui, author = {Abbas, Laith K. and Bestle, Dieter and Rui, Xiaoting}, title = {Transfer Matrix Method for the Determination of the Free Vobration of Two Eastically Coupled Beams}, series = {Advanced materials design and mechanics II, selected, peer reviewed papers from the 2013, 2nd International Conference on Advanced Materials Design and Mechanics (ICAMDM 2013), May 17-18, 2013, Kuala Lumpur, Malaysia}, booktitle = {Advanced materials design and mechanics II, selected, peer reviewed papers from the 2013, 2nd International Conference on Advanced Materials Design and Mechanics (ICAMDM 2013), May 17-18, 2013, Kuala Lumpur, Malaysia}, publisher = {Trans Tech Publ.}, address = {Durnten-Zurich [u.a.]}, pages = {301 -- 304}, language = {en} } @inproceedings{WurmBestleKahlbau, author = {Wurm, Andreas and Bestle, Dieter and Kahlbau, Sebastian}, title = {Automotive shift quality optimization based on piecewise monotone interpolation of parameter characteristics}, series = {Engineering Optimization IV, proceedings of the International Conference on Engineering Optimization (Engopt 2014), Lisbon, Portugal, 8-11 September 2014}, booktitle = {Engineering Optimization IV, proceedings of the International Conference on Engineering Optimization (Engopt 2014), Lisbon, Portugal, 8-11 September 2014}, editor = {Araujo, Aurelio L.}, publisher = {CRC Press}, isbn = {978-1-138-02725-1}, doi = {10.1201/b17488-104}, pages = {579 -- 584}, language = {en} } @inproceedings{PoehlmannBestleFlassigetal., author = {P{\"o}hlmann, Fiete and Bestle, Dieter and Flassig, Peter Michael and Hinz, Mich{\`e}l}, title = {Modular Automated Aerodynamic Compressor Design Process}, series = {Advances in Evolutionary and Deterministic Methods for Design, Optimiziation and Control in Engineering and Sciences}, booktitle = {Advances in Evolutionary and Deterministic Methods for Design, Optimiziation and Control in Engineering and Sciences}, editor = {Greiner, David and Galv{\`a}n, Blas and P{\`e}riaux, Jacques and Gauger, Nicolas R. and Giannakoglou, Kyriakos C. and Winter, Gabriel}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-11540-5}, doi = {10.1007/978-3-319-11541-2}, pages = {267 -- 276}, language = {en} } @inproceedings{KargerBestle, author = {Karger, Kai and Bestle, Dieter}, title = {Parametrie Blending and FE-Optimisation of a Compressor Blisk Test Case}, series = {Advances in Evolutionary and Deterministic Methods for Design, Optimiziation and Control in Engineering and Sciences}, booktitle = {Advances in Evolutionary and Deterministic Methods for Design, Optimiziation and Control in Engineering and Sciences}, editor = {Greiner, David and Galv{\`a}n, Blas and P{\`e}riaux, Jacques and Gauger, Nicolas R. and Giannakoglou, Kyriakos C. and Winter, Gabriel}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-11540-5}, doi = {10.1007/978-3-319-11541-2}, pages = {257 -- 266}, language = {en} } @inproceedings{AmtsfeldBestleMeyer, author = {Amtsfeld, Philipp and Bestle, Dieter and Meyer, Marcus}, title = {Direct 3D Aerodynamic Optimization of Turbine Blades with GPU-accelerated CFD}, series = {Advances in Evolutionary and Deterministic Methods for Design, Optimiziation and Control in Engineering and Sciences}, booktitle = {Advances in Evolutionary and Deterministic Methods for Design, Optimiziation and Control in Engineering and Sciences}, editor = {Greiner, David and Galv{\`a}n, Blas and P{\`e}riaux, Jacques and Gauger, Nicolas R. and Giannakoglou, Kyriakos C. and Winter, Gabriel}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-11540-5}, doi = {10.1007/978-3-319-11541-2}, pages = {197 -- 208}, language = {en} }