@misc{KayatasBestleBestleetal., author = {Kayatas, Zafer and Bestle, Dieter and Bestle, Pascal and Reick, Robin}, title = {Generation of Realistic Cut-in Maneuvers to Support Safety Assessment of Advanced Driver Assistance Systems}, series = {Applied Mechanics}, volume = {4}, journal = {Applied Mechanics}, number = {4}, issn = {2673-3161}, doi = {10.3390/applmech4040054}, pages = {1066 -- 1077}, language = {en} } @article{EberhardHuBestle, author = {Eberhard, Peter and Hu, B. and Bestle, Dieter}, title = {Longitudinal Wave Propagation in Multiple Impacted Rods}, language = {en} } @article{BestleZahariev, author = {Bestle, Dieter and Zahariev, E.}, title = {Virtual Nonlinear Multibody Systems}, language = {en} } @article{BestleEberhard, author = {Bestle, Dieter and Eberhard, Peter}, title = {Optimization of a Contact Surface}, abstract = {Zhe paper introduces ideas from shape optimization to multibody system dynamics. A disk rolling down a given slope is taken as a simple example, for which it is the goal of the optimization to shape the rolling contour of the disk such that it takes a minimum time to cover a certain distance. The shape of the sontour is described by its radius of curvature. The governing equations of motion result from the kinematics of relative motion and the Nowton-Euler formalism. Three different kinds of spirals are defined and optimized.}, language = {en} } @incollection{BestleGlora, author = {Bestle, Dieter and Glora, Michael}, title = {Optimization of Passive and Active Dynamic Systems}, series = {Virtual nonlinear multibody systems, proceedings of the NATO Advanced Study Institute on Virtual Nonlinear Multibody Systems, Prague, Czech Republic, 23 June - 3 July 2002}, booktitle = {Virtual nonlinear multibody systems, proceedings of the NATO Advanced Study Institute on Virtual Nonlinear Multibody Systems, Prague, Czech Republic, 23 June - 3 July 2002}, editor = {Schiehlen, Werner}, publisher = {Kluwer}, address = {Dordrecht [u.a.]}, isbn = {1-402-01339-6}, language = {en} } @incollection{Bestle, author = {Bestle, Dieter}, title = {Optimization of Dynamic Systems with Respect to Contact Surfaces}, language = {en} } @article{BestleWachal, author = {Bestle, Dieter and Wachal, Andrej}, title = {Multi-criterion Optimization of a Pneumatic Vibroinsulation System}, language = {en} } @article{BestleKeskin, author = {Bestle, Dieter and Keskin, Akin}, title = {Verbesserter Designprozess f{\"u}r moderne Hochdruckverdichter}, language = {de} } @inproceedings{KeskinBestle, author = {Keskin, Akin and Bestle, Dieter}, title = {Application of Multi-objective Optimization to Axial Compressor Preliminary Design}, language = {en} } @incollection{Bestle, author = {Bestle, Dieter}, title = {Design of a Laboratory Crane for Testing Control Approaches}, series = {IUTAM Symposium on Vibration Control of Nonlinear Mechanisms and Structures, proceedings of the IUTAM symposium held in Munich, Germany, 18-22 July 2005}, booktitle = {IUTAM Symposium on Vibration Control of Nonlinear Mechanisms and Structures, proceedings of the IUTAM symposium held in Munich, Germany, 18-22 July 2005}, editor = {Ulbrich, Heinz}, publisher = {Springer}, address = {Dordrecht [u.a.]}, isbn = {1-4020-4160-8}, pages = {101 -- 110}, language = {en} } @article{Bestle, author = {Bestle, Dieter}, title = {Optimierung der Kontaktgeometrie einer Ringplattform}, language = {de} } @incollection{NowickiBestleStrasser, author = {Nowicki, Daniel and Bestle, Dieter and Strasser, G.}, title = {Empfindlichkeitsuntersuchung von Kraftfahrzeugen auf bremserregte Lenkraddrehschwingungen (LDS) mit Hilfe eines Komplettfahrzeugpr{\"u}fstands}, language = {de} } @inproceedings{BeffingerBestle, author = {Beffinger, Marcin and Bestle, Dieter}, title = {Design of Progressive Shock Absorber}, language = {en} } @inproceedings{WachalBestle, author = {Wachal, Andrej and Bestle, Dieter}, title = {Use of Air Spring Elements for Vibration Insulation}, series = {Proceedings, Fifth EUROMECH Nonlinear Dynamics Conference, August 7 - 12, 2005, Eindhoven University of Technology}, booktitle = {Proceedings, Fifth EUROMECH Nonlinear Dynamics Conference, August 7 - 12, 2005, Eindhoven University of Technology}, publisher = {Univ. of Technology}, address = {Eindhoven}, isbn = {90-386-2667-3}, pages = {578 -- 585}, language = {en} } @inproceedings{KeskinDuttaBestle, author = {Keskin, Akin and Dutta, Amit Kumar and Bestle, Dieter}, title = {Modern Compressor Aerodynamic Blading Process using Multi-objective Optimization}, series = {Proceedings of the ASME Turbo Expo 2006, presented at the 2006 ASME Turbo Expo, May 6 - 11, 2006, Barcelona, Spain, Vol. 6, Part B}, booktitle = {Proceedings of the ASME Turbo Expo 2006, presented at the 2006 ASME Turbo Expo, May 6 - 11, 2006, Barcelona, Spain, Vol. 6, Part B}, publisher = {ASME}, address = {New York, NY}, isbn = {0-7918-4241-X}, pages = {1209 -- 1216}, language = {en} } @inproceedings{KeskinDuttaBestle, author = {Keskin, Akin and Dutta, Amit Kumar and Bestle, Dieter}, title = {Alternative Approach for Solving a Multi-Objective Optimization Problem in Aerodynamic Compressor Blade Design}, language = {en} } @article{KeskinBestle, author = {Keskin, Akin and Bestle, Dieter}, title = {Application of Multi-objective Optimization to Axial Compressor Preliminary Design}, series = {Aerospace science and technology}, volume = {10}, journal = {Aerospace science and technology}, number = {7}, issn = {0034-1223}, pages = {581 -- 589}, language = {en} } @misc{SwobodaHuppertzBestle, author = {Swoboda, Marius and Huppertz, Andr{\´e} and Bestle, Dieter}, title = {Multidisziplinary Compressor Blading Design Process using Automation and Multi-Objective Optimization}, language = {en} } @inproceedings{OttoBestle, author = {Otto, Dierk and Bestle, Dieter}, title = {Automation and Optimisation of Compressor Blade Design with respect to Mechanical Criteria}, series = {Deutscher Luft- und Raumfahrtkongress 2006, Braunschweig, 06. bis 09. November 2006, Bd. 2}, booktitle = {Deutscher Luft- und Raumfahrtkongress 2006, Braunschweig, 06. bis 09. November 2006, Bd. 2}, publisher = {DGLR}, address = {Bonn}, pages = {1209 -- 1214}, language = {en} } @incollection{Bestle, author = {Bestle, Dieter}, title = {Strategien der Mehrkriterien-Optimierung}, language = {de} } @incollection{EberhardBestle, author = {Eberhard, Peter and Bestle, Dieter}, title = {Computer-Aided Optimization of Mechanical Systems}, language = {en} } @inproceedings{OttoBestle, author = {Otto, Dierk and Bestle, Dieter}, title = {Multi-Disciplinary Blading Design by Means of Multi-Objective Optimisation}, language = {en} } @inproceedings{DuttaFlassigBestle, author = {Dutta, Amit Kumar and Flassig, Peter Michael and Bestle, Dieter}, title = {Multi-Objective Blade Design using a Quasi-3D Non-Dimensional Parameterization Approach}, language = {en} } @inproceedings{Bestle, author = {Bestle, Dieter}, title = {Optimization of a Platform with respect to Force Contact Conditions}, language = {en} } @inproceedings{DuttaFlassigBestle, author = {Dutta, Amit Kumar and Flassig, Peter Michael and Bestle, Dieter}, title = {A Non-Dimensional Quasi-3D Blade Design approach with respect to Aerodynamic Criteria}, series = {Proceedings of the ASME Turbo Expo 2008, presented at the 2008 ASME Turbo Expo, June 9 - 13, 2008, Berlin, Germany, Vol 6., Part C}, booktitle = {Proceedings of the ASME Turbo Expo 2008, presented at the 2008 ASME Turbo Expo, June 9 - 13, 2008, Berlin, Germany, Vol 6., Part C}, publisher = {ASME}, address = {New York, NY}, isbn = {978-0-7918-4316-1}, pages = {2445 -- 2455}, language = {en} } @inproceedings{KeskinSwobodaFlassigetal., author = {Keskin, Akin and Swoboda, Marius and Flassig, Peter Michael and Dutta, Amit Kumar and Bestle, Dieter}, title = {Accelerated Industrial Blade Design Based on Multi-Objective Optimization Using Surrogate Model Methodology}, series = {Proceedings of the ASME Turbo Expo 2008, presented at the 2008 ASME Turbo Expo, June 9 - 13, 2008, Berlin, Germany, Vol 6., Part C}, booktitle = {Proceedings of the ASME Turbo Expo 2008, presented at the 2008 ASME Turbo Expo, June 9 - 13, 2008, Berlin, Germany, Vol 6., Part C}, publisher = {ASME}, address = {New York, NY}, isbn = {978-0-7918-4316-1}, pages = {2339 -- 2349}, language = {en} } @incollection{FunkeBestle, author = {Funke, Torsten and Bestle, Dieter}, title = {Modellierung, Parameteridentifikation und Simulation passiver Fahrzeugstoßd{\"a}mpfer}, language = {de} } @article{NguyenBestle, author = {Nguyen, Tuan-Anh and Bestle, Dieter}, title = {Application of Optimization Methods to Controller Design doe Active Suspensions}, language = {en} } @inproceedings{KeskinBestle, author = {Keskin, Akin and Bestle, Dieter}, title = {A Method for Using Multi-objective Optimization within the Rolls-Royce meanline Prediction Process}, language = {en} } @inproceedings{FlassigDuttaBestle, author = {Flassig, Peter Michael and Dutta, Amit Kumar and Bestle, Dieter}, title = {Robustheits- und zuverl{\"a}ssigkeitsbasierte Mehrkriterien-Optimierung von Verdichterschaufeln}, language = {de} } @inproceedings{DuttaFlassigBestleetal., author = {Dutta, Amit Kumar and Flassig, Peter Michael and Bestle, Dieter and Keskin, Akin and Swoboda, Marius}, title = {Validierung optimierter Verdichterschaufeln mit Hilfe der 3D-CFD}, series = {Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008, Bd. 2}, booktitle = {Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008, Bd. 2}, publisher = {Dt. Ges. f{\"u}r Luft- und Raumfahrt}, address = {Bonn}, pages = {1023 -- 1033}, language = {de} } @inproceedings{FlassigDuttaBestle, author = {Flassig, Peter Michael and Dutta, Amit Kumar and Bestle, Dieter}, title = {Robuste Auslegung von Verdichterschaufeln}, series = {Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008, Bd. 2}, booktitle = {Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008, Bd. 2}, publisher = {Dt. Ges. f{\"u}r Luft- und Raumfahrt}, address = {Bonn}, pages = {1001 -- 1010}, language = {de} } @inproceedings{SommerFlassigDuttaetal., author = {Sommer, Lars and Flassig, Peter Michael and Dutta, Amit Kumar and Bestle, Dieter}, title = {Kr{\"u}mmungs-Nebenbedingungen in der aerodynamischen Mehrkriterien-Optimierung von Verdichterschaufelprofilen}, series = {Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008, Bd. 2}, booktitle = {Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008, Bd. 2}, publisher = {Dt. Ges. f{\"u}r Luft- und Raumfahrt}, address = {Bonn}, pages = {1011 -- 1022}, language = {de} } @inproceedings{DuttaFlassigBestle, author = {Dutta, Amit Kumar and Flassig, Peter Michael and Bestle, Dieter}, title = {Validation of Q3D-Blade Optimisation Results by 3D-CFD}, language = {en} } @inproceedings{HinzBestle, author = {Hinz, Michel and Bestle, Dieter}, title = {A Topology Homogenisation Approach for Parameterising Compressors with Different Number of Stages within the Preliminary Meanline Design Process}, language = {en} } @inproceedings{SommerBestle, author = {Sommer, Lars and Bestle, Dieter}, title = {Speeding-up 2D Aerofoil Design by Using Curvature Constraints}, language = {en} } @inproceedings{FlassigDuttaBestle, author = {Flassig, Peter Michael and Dutta, Amit Kumar and Bestle, Dieter}, title = {Robustheit und Zuverl{\"a}ssigkeit in der aerodynamischen Verdichterauslegung}, language = {de} } @inproceedings{BestleKeskinOtto, author = {Bestle, Dieter and Keskin, Akin and Otto, Dierk}, title = {Process Integration and Automation for optimal Design}, language = {en} } @inproceedings{DuttaFlassigOttoetal., author = {Dutta, Amit Kumar and Flassig, Peter Michael and Otto, Dierk and Bestle, Dieter}, title = {Process Integration for Multidisciplinary Multi-objective Blade Design}, language = {en} } @misc{SwobodaHuppertzKeskinetal., author = {Swoboda, Marius and Huppertz, Andr{\´e} and Keskin, Akin and Otto, Dierk and Bestle, Dieter}, title = {Multidisciplinary Compressor Blading Design Process using Automation and Multi-Objective optimization}, language = {en} } @article{Bestle, author = {Bestle, Dieter}, title = {Optimization of a Platform with respect to Force Contact Conditions}, series = {Journal of computational and nonlinear dynamics}, volume = {3}, journal = {Journal of computational and nonlinear dynamics}, number = {4}, issn = {1555-1423}, pages = {8}, language = {en} } @inproceedings{KeskinSwobodaFlassigetal., author = {Keskin, Akin and Swoboda, Marius and Flassig, Peter Michael and Dutta, Amit Kumar and Bestle, Dieter}, title = {New Optimization Strategy for Rapid industrial Blade Design}, language = {en} } @inproceedings{HinzBestle, author = {Hinz, Michel and Bestle, Dieter}, title = {Implementation of Individual iSIGHT-FD Components for Process Acceleration by Wrapping of FORTRAN-Routines}, language = {en} } @misc{BestleHinzRuehle, author = {Bestle, Dieter and Hinz, Michel and R{\"u}hle, Tobias}, title = {Unterst{\"u}tzende Strategien f{\"u}r den robusten Triebwerksentwurf - Durch Prozessintegration, problemspezifische Parametrisierung und Mehrkriterien-Optimierung zum Erfolg}, language = {de} } @inproceedings{FlassigBestle, author = {Flassig, Peter Michael and Bestle, Dieter}, title = {Probabilistische Studien zur robusten aerodynamischen Verdichterauslegung}, language = {de} } @inproceedings{SchulzBestle, author = {Schulz, Anatol and Bestle, Dieter}, title = {Acceleration of Compressor Blade Structural Design Process by Direct Use of Efficient 3D Aerofoil Parameterisation and Shell Elements}, language = {en} } @incollection{FunkeBestle, author = {Funke, Torsten and Bestle, Dieter}, title = {Entwicklung eines physikalischen D{\"a}mpfermodells zur Analyse und Optimierung des Fahrverhaltens}, language = {de} } @incollection{KahlbauBestleMatthies, author = {Kahlbau, Sebastian and Bestle, Dieter and Matthies, Felix}, title = {Mehrkriterielle Optimierung des Schaltablaufs von Automatikgetrieben}, language = {de} } @inproceedings{RuehleBestle, author = {R{\"u}hle, Tobias and Bestle, Dieter}, title = {Ein Verfahren zur optimalen Hochdruckverdichterauslegung auf Basis der Meridianstr{\"o}mungsrechnung}, series = {Deutscher Luft- und Raumfahrtkongress 2010, Hamburg, 31. August - 2. September 2010, Tagungsband}, booktitle = {Deutscher Luft- und Raumfahrtkongress 2010, Hamburg, 31. August - 2. September 2010, Tagungsband}, publisher = {DGLR}, address = {Bonn}, pages = {327 -- 336}, language = {de} } @misc{SommerBestle, author = {Sommer, Lars and Bestle, Dieter}, title = {Curvature driven two-dimensional multi-objective optimization of compressor blade sections}, series = {Aerospace Science and Technology}, volume = {15}, journal = {Aerospace Science and Technology}, number = {4}, issn = {0034-1223}, pages = {334 -- 342}, language = {en} }