@misc{BacherLebedynskyyFischeretal., author = {Bacher, Christian and Lebedynskyy, Volodymyr and Fischer, Silvio and Riebel, Ulrich}, title = {Discharge electrode geometry and energy efficiency in a one-stage wire-tube electrostatic precipitator operating at high concentrations of submicron liquid aerosol}, series = {Environmental Technology}, journal = {Environmental Technology}, issn = {0959-3330}, doi = {10.1080/09593330.2018.1555613}, pages = {13}, abstract = {In order to help answering the question "Which electrode design is the best?", the precipitation performance of a tubular ESP was determined for different electrode designs with special attention to specific energy consumption. Experiments were conducted in a wire-tube arrangement with a high loading of liquid submicron particles causing strong space charge effects, also known as corona quenching. The experiments are supplemented by numerical simulation results showing the effect of residence time and power consumption on separation efficiency.}, language = {en} } @misc{SchmidtAhrensFlegeetal., author = {Schmidt, Thomas and Ahrens, Christian and Flege, Jan Ingo and Jaye, Cherno and Fischer, Daniel A. and Falta, Jens}, title = {Growth of Epitaxial 3,4,9,10-Perylene Tetracarboxylic Dianhydride on Bi-Terminated Silicon}, series = {Journal of Physical Chemistry C}, volume = {123}, journal = {Journal of Physical Chemistry C}, number = {12}, issn = {1932-7447}, doi = {10.1021/acs.jpcc.8b10396}, pages = {7097 -- 7109}, abstract = {The epitaxial quality of thin films crucially depends on their interaction with the substrate. Up to now, Ag-terminated Si(111) has been employed as the model substrate for the growth of 3,4,9,10-perylene tetracarboxylic dianhydride (PTCDA) on semiconductors. In this study, we will show that Bi termination results in PTCDA films of superior epitaxial quality. We have studied the growth of PTCDA on bismuth-passivated Si(111) in detail by means of spot profile analysis of low-energy electron diffraction (SPA-LEED), X-ray photoemission spectroscopy (XPS), near-edge X-ray absorptionfine structure (NEXAFS), and scanning tunneling microscopy (STM). The XPS results reveal the presence of intact PTCDA molecules on the surface upon adsorption. NEXAFS data indicate the PTCDA molecules being oriented with their molecular plane parallel to the surface. STM shows a very smooth growth front of the PTCDA film, preserving the step structure of the substrate. High-resolution SPA-LEED data demonstrate the presence of a multidomain surface with a rich variety of PTCDA surface structures, which were identified to be most prominently herring-bone polytypes. However, in the monolayer range, quadratic brick-wall structures and a nearly square-like structure as well as a perylene-like structure have also been found. Despite the simultaneous presence of multiple domains, the individual domains show excellent lateral ordering, with larger domain sizes as compared to the case of Ag-terminated Si(111).}, language = {en} } @misc{TannertZiemsVoigtetal., author = {Tannert, Daniel and Ziems, Christian and Voigt, Andr{\´e} and Fischer, Ulrich and Krautz, Hans Joachim}, title = {Wasserstoff- und Elektrolyseforschung an der BTU Cottbus - Senftenberg}, series = {VGB PowerTech}, volume = {98}, journal = {VGB PowerTech}, number = {8}, issn = {1435-3199}, pages = {65 -- 69}, language = {de} } @misc{ZiemsFischerKrautz, author = {Ziems, Christian and Fischer, Ulrich and Krautz, Hans Joachim}, title = {Entwicklung und anwendungsbezogene Charakterisierung von effizienten, hochleistungsf{\"a}higen 3D-Elektrodenmaterialien f{\"u}r die alkalische Druckelektrolysetechnologie}, series = {VGB PowerTech}, volume = {98}, journal = {VGB PowerTech}, number = {8}, issn = {1435-3199}, pages = {70 -- 74}, language = {de} } @misc{BacherRiebelLebedynskyyetal., author = {Bacher, Christian and Riebel, Ulrich and Lebedynskyy, Volodymyr and Fischer, Silvio}, title = {Discharge electrode geometries and energy efficiency in one-stage electrostatic precipitators at high aerosol concentration}, series = {ICESP 2018, Charlotte, USA, 9-11 October 2018}, journal = {ICESP 2018, Charlotte, USA, 9-11 October 2018}, pages = {7}, abstract = {In order to help answering the question "Which electrode design is the best?", the precipitation performance of a tubular ESP was determined for different electrode designs with special attention to specific energy consumption. Experiments were conducted in a wire-tube arrangement with a high loading of liquid submicron particles. The experiments are supplemented by numerical simulation results showing the effect of residence time and power consumption on separation efficiency. By combining the own experimental results with seemingly contradicting statements of the literature, the authors provide also some general guidelines for discharge electrode design when designing or upgrading electrostatic precipitator plants.}, language = {en} } @misc{JurischkaDinterEfimovaetal., author = {Jurischka, Christoph and Dinter, Franziska and Efimova, Anastasia and Weiss, Romano and Schiebel, Juliane and Schulz, Christian and Fayziev, Bekzodjon and Schierack, Peter and Fischer, Thomas and R{\"o}diger, Stefan}, title = {An explorative study of polymers for 3D printing of bioanalytical test systems}, series = {Clinical Hemorheology and Microcirculation}, volume = {75}, journal = {Clinical Hemorheology and Microcirculation}, number = {1}, issn = {1875-8622}, doi = {10.3233/CH-190713}, pages = {57 -- 84}, abstract = {Background: The 3D printing is relevant as a manufacturing technology of functional models for forensic, pharmaceutical and bioanalytical applications such as drug delivery systems, sample preparation and point-of-care tests. Objective: Melting behavior and autofluorescence of materials are decisive for optimal printing and applicability of the product which are influenced by varying unknown additives. Methods: We have produced devices for bioanalytical applications from commercially available thermoplastic polymers using a melt-layer process. We characterized them by differential scanning calorimetry, fluorescence spectroscopy and functional assays (DNA capture assay, model for cell adhesion, bacterial adhesion and biofilm formation test). Results: From 14 tested colored, transparent and black materials we found only deep black acrylonitrile-butadiene-styrene (ABS) and some black polylactic acid (PLA) useable for fluorescence-based assays, with low autofluorescence only in the short-wave range of 300-400 nm. PLA was suitable for standard bioanalytical purposes due to a glass transition temperature of approximately 60°C, resistance to common laboratory chemicals and easy print processing. For temperature-critical methods, such as hybridization reactions up to 90°C, ABS was better suited. Conclusions: Autofluorescence was not a disadvantage per se but can also be used as a reference signal in assays. The rapid development of individual protocols for sample processing and analysis required the availability of a material with consistent quality over time. For fluorescence-based assays, the use of commercial standard materials did not seem to meet this requirement.}, language = {en} } @misc{NitschRatzkePozarowskaetal., author = {Nitsch, Paul-G. and Ratzke, Markus and Pozarowska, Emilia and Flege, Jan Ingo and Alvarado Chavarin, Carlos and Wenger, Christian and Fischer, Inga Anita}, title = {Deposition of reduced ceria thin films by reactive magnetron sputtering for the development of a resistive gas sensor}, series = {Verhandlungen der DPG, Berlin 2024}, journal = {Verhandlungen der DPG, Berlin 2024}, publisher = {Deutsche Physikalische Gesellschaft}, address = {Bad Honnef}, issn = {0420-0195}, abstract = {The use of cerium oxide for hydrogen sensing is limited by the low electrical conductivity of layers deposited from a ceria target. To increase the electrical conductivity, partially reduced cerium oxide layers were obtained from a metallic cerium target by reactive magnetron sputtering. The proportions of the oxidation states Ce3+, present in reduced species, and Ce4+, present in fully oxidized species, were determined by ex-situ XPS. For electrical characterization, films were deposited on planarized tungsten finger electrodes. IV curves were measured over several days to investigate possible influences of oxygen and humidity on electrical conductivity. The morphological stability of the layers under ambient conditions was investigated by microscopical methods. The XPS results show a significant amount of Ce3+ in the layers. The electrical conductivity of as-grown samples is several orders of magnitude higher than that of samples grown from a ceria target. However, the conductivity decreases over time, indicating an oxidation of the layers. The surface morphology of the samples was found to be changing drastically within days, leading to partial delamination.}, language = {en} } @misc{KostoTschammerMoralesetal., author = {Kosto, Yuliia and Tschammer, Rudi and Morales, Carlos and Henkel, Karsten and Flege, Jan Ingo and Ratzke, Markus and Fischer, Inga Anita and Costina, Ioan and Alvarado Chavarin, Carlos and Wenger, Christian}, title = {Rational design and development of room temperature hydrogen sensors compatible with CMOS technology: a necessary step for the coming renewable hydrogen economy}, series = {Proceedings of iCampus Conference Cottbus 2024}, journal = {Proceedings of iCampus Conference Cottbus 2024}, publisher = {AMA Service GmbH}, address = {Wunstorf}, isbn = {978-3-910600-00-3}, doi = {10.5162/iCCC2024/P21}, pages = {182 -- 185}, abstract = {The transition towards a new, renewable energy system based on green energy vectors, such as hydrogen, requires not only direct energy conversion and storage systems, but also the development of auxiliary components, such as highly sensitive hydrogen gas sensors integrated into mass devices that operate at ambient conditions. Despite the recent advances in nanostructured metal oxide thin films in terms of simple fabrication processes and compatibility with integrated circuits, high sensitivity, and short response/recovery times usually require the use of expensive noble metals or elevated tem-peratures (>250 ºC), which results in high power consumption and poor long-term stability. This article presents the first steps of the work on developing a novel resistive hydrogen gas sensor based on ultrathin cerium oxide films, compatible with complementary metal oxide semiconductor technology and capable of operating at room temperature. Here, we show a multidisciplinary bottom-up approach combining different work areas for the sensor development, such as sensor architecture, sensing mechanism and deposition strategy of the active layer, electrical contact design depending on the desired electrical output, and fast testing under controlled environments.}, language = {en} } @misc{HayatRatzkeAlvaradoChavarinetal., author = {Hayat, Ahsan and Ratzke, Markus and Alvarado Chavarin, Carlos and Z{\"o}llner, Marvin Hartwig and Corley-Wiciak, Agnieszka Anna and Schubert, Markus Andreas and Wenger, Christian and Fischer, Inga Anita}, title = {Structural and morphological properties of CeO2 films deposited by radio frequency magnetron sputtering for back-end-of-line integration}, series = {Thin Solid Films}, volume = {807}, journal = {Thin Solid Films}, issn = {0040-6090}, doi = {10.1016/j.tsf.2024.140547}, pages = {3}, language = {en} } @misc{EisenhauerFrankWeigeltetal., author = {Eisenhauer, Nico and Frank, Karin and Weigelt, Alexandra and Bartkowski, Bartosz and Beugnon, R{\´e}my and Liebal, Katja and Mahecha, Miguel and Quaas, Martin and Al-Halbouni, Djamil and Bastos, Ana and Bohn, Friedrich J. and Brito, Mariana Madruga de and Denzler, Joachim and Feilhauer, Hannes and Fischer, Rico and Fritsche, Immo and Guimaraes-Steinicke, Claudia and H{\"a}nsel, Martin and Haun, Daniel B. M. and Herrmann, Hartmut and Huth, Andreas and Kalesse-Los, Heike and Koetter, Michael and Kolleck, Nina and Krause, Melanie and Kretschmer, Marlene and Leit{\~a}o, Pedro J. and Masson, Torsten and Mora, Karin and M{\"u}ller, Birgit and Peng, Jian and P{\"o}hlker, Mira L. and Ratzke, Leonie and Reichstein, Markus and Richter, Solveig and R{\"u}ger, Nadja and S{\´a}nchez-Parra, Beatriz and Shadaydeh, Maha and Sippel, Sebastian and Tegen, Ina and Thr{\"a}n, Daniela and Umlauft, Josefine and Wendisch, Manfred and Wolf, Kevin and Wirth, Christian and Zacher, Hannes and Zaehle, S{\"o}nke and Quaas, Johannes}, title = {A belowground perspective on the nexus between biodiversity change, climate change, and human well-being}, series = {Journal of Sustainable Agriculture and Environment}, volume = {3}, journal = {Journal of Sustainable Agriculture and Environment}, number = {2}, publisher = {Wiley}, issn = {2767-035X}, doi = {10.1002/sae2.12108}, pages = {12}, abstract = {Soil is central to the complex interplay among biodiversity, climate, and society. This paper examines the interconnectedness of soil biodiversity, climate change, and societal impacts, emphasizing the urgent need for integrated solutions. Human-induced biodiversity loss and climate change intensify environmental degradation, threatening human well-being. Soils, rich in biodiversity and vital for ecosystem function regulation, are highly vulnerable to these pressures, affecting nutrient cycling, soil fertility, and resilience. Soil also crucially regulates climate, influencing energy, water cycles, and carbon storage. Yet, climate change poses significant challenges to soil health and carbon dynamics, amplifying global warming. Integrated approaches are essential, including sustainable land management, policy interventions, technological innovations, and societal engagement. Practices like agroforestry and organic farming improve soil health and mitigate climate impacts. Effective policies and governance are crucial for promoting sustainable practices and soil conservation. Recent technologies aid in monitoring soil biodiversity and implementing sustainable land management. Societal engagement, through education and collective action, is vital for environmental stewardship. By prioritizing interdisciplinary research and addressing key frontiers, scientists can advance understanding of the soil biodiversity-climate change-society nexus, informing strategies for environmental sustainability and social equity.}, language = {en} } @misc{HerglotzOchMeyeretal., author = {Herglotz, Christian and Och, Hannah and Meyer, Anna and Ramasubbu, Geetha and Eicherm{\"u}ller, Lena and Kr{\"a}nzler, Matthias and Brand, Fabian and Fischer, Kristian and Nguyen, Dat Thanh and Regensky, Andy and Kaup, Andr{\´e}}, title = {The Bj{\o}ntegaard Bible Why Your Way of Comparing Video Codecs May Be Wrong}, series = {IEEE Transactions on Image Processing}, journal = {IEEE Transactions on Image Processing}, number = {Volume 33}, issn = {1057-7149}, doi = {10.1109/TIP.2023.3346695}, pages = {987 -- 1001}, abstract = {In this paper, we provide an in-depth assessment on the Bj{\o}ntegaard Delta. We construct a large data set of video compression performance comparisons using a diverse set of metrics including PSNR, VMAF, bitrate, and processing energies. These metrics are evaluated for visual data types such as classic perspective video, 360° video, point clouds, and screen content. As compression technology, we consider multiple hybrid video codecs as well as state-of-the-art neural network based compression methods. Using additional supporting points in-between standard points defined by parameters such as the quantization parameter, we assess the interpolation error of the Bj{\o}ntegaard-Delta (BD) calculus and its impact on the final BD value. From the analysis, we find that the BD calculus is most accurate in the standard application of rate-distortion comparisons with mean errors below 0.5 percentage points. For other applications and special cases, e.g., VMAF quality, energy considerations, or inter-codec comparisons, the errors are higher (up to 5 percentage points), but can be halved by using a higher number of supporting points. We finally come up with recommendations on how to use the BD calculus such that the validity of the resulting BD-values is maximized. Main recommendations are as follows: First, relative curve differences should be plotted and analyzed. Second, the logarithmic domain should be used for saturating metrics such as SSIM and VMAF. Third, BD values below a certain threshold indicated by the subset error should not be used to draw recommendations. Fourth, using two supporting points is sufficient to obtain rough performance estimates.}, language = {en} } @article{WallravenFischerCunninghametal., author = {Wallraven, Christian and Fischer, J. and Cunningham, Douglas William and Bartz, Dirk and B{\"u}lthoff, Heinrich H.}, title = {The Evaluation of Real-World and Computer-Generated Stylized Facial Expressions}, language = {en} } @inproceedings{WallravenFischerCunninghametal., author = {Wallraven, Christian and Fischer, J. and Cunningham, Douglas William and Bartz, Dirk and B{\"u}lthoff, Heinrich H.}, title = {The Evaluation of Stylized Facial Expressions}, series = {Proceedings, Symposium on Applied Perception in Graphics and Visualization, APGV 2006, Boston, Massachusetts, July 28 - 29, 2006}, booktitle = {Proceedings, Symposium on Applied Perception in Graphics and Visualization, APGV 2006, Boston, Massachusetts, July 28 - 29, 2006}, publisher = {ACM Press}, address = {New York, NY}, isbn = {1-59593-429-4}, pages = {85 -- 92}, language = {en} } @inproceedings{FischerCunninghamBartzetal., author = {Fischer, J. and Cunningham, Douglas William and Bartz, Dirk and Wallraven, Christian and B{\"u}lthoff, Heinrich H. and Strasser, W.}, title = {Measuring the Discernibility of Virtual Objects in Conventional and Stylized Augmented Reality}, language = {en} } @inproceedings{BartzCunninghamFischeretal., author = {Bartz, Dirk and Cunningham, Douglas William and Fischer, Jan and Wallraven, Christian}, title = {The Role of Perception for Computer Graphics}, series = {Eurographics 2008, State-of-the-Art-Reports, Crete, Greece, 2008}, booktitle = {Eurographics 2008, State-of-the-Art-Reports, Crete, Greece, 2008}, pages = {65 -- 86}, language = {en} } @misc{PieperBehnkeDumkeetal., author = {Pieper, Dawid and Behnke, Eva-Maria and Dumke, Rieke and Kehr-Fuckel, Christel and Radow, Carolin and Schulze, Nils and Follmann, Markus and Schaefer, Corinna and Prill, Robert and Kopkow, Christian and Bahns, Carolin and Choi, Kyung-Eun (Anna) and Fischer, Lena}, title = {Awareness of adapting clinical practice guidelines to a local context}, series = {Clinical and public health guidelines}, volume = {2}, journal = {Clinical and public health guidelines}, number = {3}, publisher = {Wiley}, address = {Hobken, New Jersey}, issn = {2836-3973}, doi = {10.1002/gin2.70025}, pages = {1 -- 7}, abstract = {Background Guideline recommendations are often not implemented in practice. This can be attributed to factors such as patient preferences and characteristics, structural conditions, personnel or other resources, as well as cultural or ethical aspects. Adaptations to the local context (e.g., regional or hospital) result in so-called locally adapted guidelines (LAGL), which could improve implementation. We aimed to assess the awareness of LAGL among guideline developers in Germany. Methods An online survey was conducted via LimeSurvey in May 2024. The questionnaire, designed based on literature and expert opinions, consisted of 23 items, predominantly with dichotomous response options. Recruitment was conducted via email. Direct contact addresses were identified using the German guideline registry (n = 397). Additionally, a mailing list distribution was conducted through the guidelines working group of the German Network for Evidence-Based Medicine (n = 316). Only fully completed questionnaires were included in the analysis. Data cleaning and descriptive analysis were performed using Excel. Results A total of 63 questionnaires were fully completed. The most represented groups were physicians (65\%) and methodologists (24\%), most frequently in coordination (76\%) or as group members (62\%). The most judicious reasons for developing a LAGL were differences in patient populations (48\%), currency of recommendations (46\%), and patient values and preferences (44\%). The most commonly cited likely reasons for developing a LAGL were economic considerations (32\%), differences in patient populations (30\%), and currency of recommendations (30\%). Many respondents (59\%) were aware of the possibility of adapting existing guidelines to the local context. Among these, approximately half (49\%) had already locally adapted a guideline, with 75\% using an adaptation framework. Discussion LAGLs are known among guideline developers in Germany and are generally developed using adaptation frameworks. Potential reasons for preparing LAGLs are diverse, with some discrepancies between perceived valid and likely reasons. Highlights Over half (59\%) of surveyed clinical practice guideline (CPG) developers in Germany were aware of the possibility of adapting CPGs to local contexts, and nearly half of them had practical experience doing so. Although several adaptation frameworks exist, only 44\% of experienced adaptors were familiar with them, and among users, many found them only partly helpful. Differences in patient populations, outdated recommendations, and patient values were rated as the most valid reasons for local CPG adaptation, while economic factors were seen as the most likely driver in practice. Despite existing awareness, guideline adaptation to local settings remains underutilized and lacks structured implementation, highlighting the need for clearer definitions, better resources, and more practical examples.}, language = {en} } @misc{KalraAlvaradoChavarinNitschetal., author = {Kalra, Amanpreet and Alvarado Chavarin, Carlos and Nitsch, Paul-Gregor and Tschammer, Rudi and Flege, Jan Ingo and Ratzke, Markus and Zoellner, Marvin Hartwig and Schubert, Markus Andreas and Wenger, Christian and Fischer, Inga Anita}, title = {Deposition of CeOₓ/SnOₓ-based thin films via RF magnetron sputtering for resistive gas sensing applications}, series = {Physica B, Condensed matter}, volume = {723}, journal = {Physica B, Condensed matter}, publisher = {Elsevier BV}, address = {Amsterdam}, issn = {0921-4526}, doi = {10.1016/j.physb.2025.418098}, pages = {1 -- 7}, abstract = {Cerium oxide-tin oxide (CeOx/SnOx) thin films with varying Sn content were deposited using RF magnetron sputtering and investigated for hydrogen sensing applications. Structural, compositional, and morphological properties were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX). Gas sensing measurements showed effective hydrogen detection at room temperature, with the sensitivity strongly influenced by Sn content and oxygen vacancy concentration. Higher Sn concentration enhanced the sensing response, which was correlated with microstructural features obtained from AFM and EDX, as well as with the presence of Ce3+ and Ce4+ oxidation states identified by XPS. This study highlights the potential of CeOx/SnOx thin films for possible back-end-of-line integration and provides proof-of-principle for room-temperature hydrogen sensing.}, language = {en} } @misc{SenguelReiterLotfietal., author = {Seng{\"u}l, Akant and Reiter, Sebastian and Lotfi, Zahra and Efremenko, Julia and Laroussi, Arwa and Corley-Wiciak, Agnieszka Anna and Ratzke, Markus and Mirsky, Vladimir M. and Wenger, Christian and Fischer, Inga Anita}, title = {Titanium nitride plasmonic nanohole arrays with polymer coating : optical properties and their humidity-induced modifications}, series = {Optical materials express}, volume = {16}, journal = {Optical materials express}, number = {2}, publisher = {Optica Publishing Group}, address = {Washington, DC}, issn = {2159-3930}, doi = {10.1364/ome.578871}, pages = {184 -- 196}, abstract = {The use of titanium nitride (TiN) for the fabrication of plasmonic structures such as nanohole arrays (NHAs) can enable their integration into optoelectronic devices on the silicon (Si) platform, for example, for the realization of on-chip chemical sensors and biosensors based on refractometric transduction. With a corresponding functionalization of the TiN nanohole arrays, these ultra-compact devices can be utilized in the development of various affinity sensors and sensor systems, such as cost-effective electronic noses for the early detection of gases in the food industry or agriculture. In this work, we focus on two types of coating for functionalization of TiN nanohole arrays: electrochemically synthesized poly-N-methylaniline and layer-by-layer deposited polyacrylic-acid/poly-allylamine (PAA/PAH). Our investigation comprises the experimental characterization of the optical properties of TiN nanhole arrays coated with polymer layers of different thicknesses as well as a comparison with simulation results. We demonstrate the potential of our setup sensing applications by measuring changes in optical properties of TiN nanohole arrays coated with PAA/PAH upon exposure to air of different humidity.}, language = {en} } @misc{SchlipfCutoloManganellietal., author = {Schlipf, Jon and Cutolo, Maria Alessandra and Manganelli, Costanza Lucia and Reiter, Sebastian and Seibold, G{\"o}tz and Skibitzki, Oliver and Wenger, Christian and Fischer, Inga Anita}, title = {Fabrication and optical characterization of CMOS-compatible honeycomb-like large-scale lattices of near-field coupled plasmonic TiN nanotriangles}, series = {Advanced optical materials}, volume = {2025}, journal = {Advanced optical materials}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {2195-1071}, doi = {10.1002/adom.202403408}, pages = {1 -- 8}, abstract = {Honeycomb-like plasmonic titanium nitride nanotriangle arrays defined by photolithography and fabricated in a modified silicon-germanium electronic-photonic integrated circuit process in a state-of-the-art pilot line. The nanotriangle arrays are characterized in experiments and simulations. The momentum-dependent reflectance spectra exhibit not only features that are consistent with surface lattice resonances in the honeycomb lattice but also minima governed by near-field coupling of the individual nanotriangles. The optical characterization results in combination with simulation-based predictions indicate that such nanotriangle arrays are capable of supporting collective plasmonic resonances that can be described as massless Dirac particles. The fabrication approach opens up the possibility of integrating the structures into device fabrication processes, and avenues toward near-infrared sensing and communication applications are predicted.}, language = {en} }