@misc{JahnBlaudeckBaumannetal., author = {Jahn, Stephan F. and Blaudeck, Thomas and Baumann, Reinhard R. and Jakob, Alexander and Ecorchard, Petra and R{\"u}ffer, Tobias and Lang, Heinrich and Schmidt, Peer}, title = {Inkjet Printing of Conductive Silver Patterns by Using the First Aqueous Particle-Free MOD Ink without Additional Stabilizing Ligands}, series = {Chemistry of Materials}, volume = {22}, journal = {Chemistry of Materials}, number = {10}, issn = {1520-5002}, doi = {10.1021/cm9036428}, pages = {3067 -- 3071}, abstract = {The chemical and physical properties of [AgO2C(CH2OCH2)3H] (3) and its use as an aqueous, ligand-free MOD ink (MOD = metal-organic decomposition) for piezo inkjet printing is discussed. The printed, thermal, or photochemical sintered silver features are electrically conductive on glass (2.7 × 107 S m-1) and PET (PET = polyethylene terephthalate) substrates (1.1 × 107 S m-1) corresponding to 43\% and 18\% of the bulk silver conductivity. Conducted tape tests show the suitability of the ink for particularly polymer substrates. TG-MS studies demonstrate a two-step decomposition for the conversion of 3 to elemental silver. The structure of 3 in the solid state was determined by single X-ray structure determination.}, language = {en} } @misc{JahnJakobBlaudecketal., author = {Jahn, Stephan F. and Jakob, Alexander and Blaudeck, Thomas and Schmidt, Peer and Lang, Heinrich and Baumann, Reinhard R.}, title = {Inkjet printing of conductive patterns with an aqueous solution of [AgO2C(CH2OCH2)3H] without any additional stabilizing ligands}, series = {Thin Solid Films}, volume = {518}, journal = {Thin Solid Films}, number = {12}, issn = {0040-6090}, doi = {10.1016/j.tsf.2010.01.030}, pages = {3218 -- 3222}, abstract = {The use of silver(I)-2-[2-(2-methoxyethoxy)ethoxy]acetate, [AgO2C(CH2OCH2)3H], and its application as an aqueous metal-organic decomposition (MOD) inkjet ink is reported. The chemical and physical properties of the silver carboxylate and the ink formulated thereof are discussed. The ink meets all requirements of piezo driven inkjet printing. The printed features were converted into electrically conducting silver patterns by thermal or photo-thermal treatment. The conversion of [AgO2C(CH2OCH2)3H] to elemental silver follows a two-step decomposition as demonstrated by thermogravimetry-mass spectrometry (TG-MS) measurements. The measured conductivities of the printed features on glass and polyethylene-terephthalate (PET) are 2.7 × 107 S m-1 and 1.1 × 107 S m-1, respectively, which correspond to 43\% (glass) and 18\% (PET) of the bulk silver conductivity.}, language = {en} }