@misc{MaqboolHajavifardWaltheretal., author = {Maqbool, Fawad and Hajavifard, Ramin and Walther, Frank and Bambach, Markus}, title = {Engineering the residual stress state of the metastable austenitic stainless steel (MASS) disc springs by incremental sheet forming (ISF)}, series = {Production Engineering}, volume = {Vol. 13}, journal = {Production Engineering}, number = {2}, issn = {0944-6524}, doi = {10.1007/s11740-018-0864-6}, pages = {139 -- 148}, language = {en} } @misc{BesongBuhlBambach, author = {Besong, Lemopi Isidore and Buhl, Johannes and Bambach, Markus}, title = {Investigations on hole-flanging by paddle forming and a comparison with single point incremental forming}, series = {International Journal of Mechanical Sciences}, volume = {vol. 164}, journal = {International Journal of Mechanical Sciences}, issn = {0020-7403}, doi = {10.1016/j.ijmecsci.2019.105143}, pages = {17}, language = {en} } @misc{EisentrautBolzSizovaetal., author = {Eisentraut, Mark and Bolz, Sebastian and Sizova, Irina and Bambach, Markus and Weiß, Sabine}, title = {Development of a heat treatment strategy for the γ-TiAl based alloy TNM-B1 to increase the hot workability}, series = {SN Applied Sciences}, volume = {1}, journal = {SN Applied Sciences}, number = {11}, issn = {2523-3963}, doi = {10.1007/s42452-019-1563-4}, pages = {8}, language = {en} } @misc{StendalEisentrautSizovaetal., author = {Stendal, Johan Andreas and Eisentraut, Mark and Sizova, Irina and Bolz, Sebastian and Bambach, Markus and Weiß, Sabine}, title = {Effect of heat treatment on the workability of hot isostatically pressed TNM-B1}, series = {AIP Conference Proceedings}, volume = {2113}, journal = {AIP Conference Proceedings}, number = {1}, isbn = {978-0-7354-1847-9}, doi = {10.1063/1.5112544}, language = {en} } @misc{ImranSzyndlerAfzaletal., author = {Imran, Muhammad and Szyndler, Joanna and Afzal, Muhammad Junaid and Bambach, Markus}, title = {Towards the damage evolution for hot forming processes using Gurson-Tvergaard Needleman model - Coupled to dynamic recrystallization}, series = {AIP Conference Proceedings}, volume = {2113}, journal = {AIP Conference Proceedings}, number = {1}, isbn = {978-0-7354-1847-9}, doi = {10.1063/1.5112741}, language = {en} } @misc{MaqboolBambach, author = {Maqbool, Fawad and Bambach, Markus}, title = {Experimental and Numerical Investigation of the Influence of Process Parameters in Incremental Sheet Metal Forming on Residual Stresses}, series = {Journal of Manufacturing and Materials Processing}, volume = {3}, journal = {Journal of Manufacturing and Materials Processing}, number = {2}, issn = {2504-4494}, doi = {10.3390/jmmp3020031}, pages = {22}, language = {en} } @misc{EmdadiSizovaBambachetal., author = {Emdadi, Aliakbar and Sizova, Irina and Bambach, Markus and Hecht, Ulrike}, title = {Hot deformation behavior of a spark plasma sintered Fe-25Al-1.5Ta alloy with strengthening Laves phase}, series = {Intermetallics}, volume = {Vol. 109}, journal = {Intermetallics}, issn = {0966-9795}, doi = {10.1016/J.intermet.2019.03.017}, pages = {123 -- 134}, language = {en} } @misc{BuhlIsrarBambach, author = {Buhl, Johannes and Israr, Rameez and Bambach, Markus}, title = {Modeling and convergence analysis of directed energy deposition simulations with hybrid implicit / explicit and implicit solutions}, series = {Journal of Machine Engineering}, volume = {Vol. 19}, journal = {Journal of Machine Engineering}, number = {3}, issn = {2391-8071}, doi = {10.5604/01.3001.0013.4086}, pages = {94 -- 107}, language = {en} } @misc{FuegenschuhBuhlBambach, author = {F{\"u}genschuh, Armin and Buhl, Johannes and Bambach, Markus}, title = {Trajectory Optimization for Wire-Arc Additive Manufacturing}, series = {Operations Research Proceedings 2018 ; selected papers of the Annual International Conference of the German Operations Research Society (GOR), Brussels, Belgium, September 12-14, 2018}, journal = {Operations Research Proceedings 2018 ; selected papers of the Annual International Conference of the German Operations Research Society (GOR), Brussels, Belgium, September 12-14, 2018}, editor = {Fortz, Bernard and Labb{\´e}, Martine}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-18499-5}, doi = {10.1007/978-3-030-18500-8}, pages = {331 -- 337}, language = {en} } @misc{BesongBuhlBambach, author = {Besong, Lemopi Isidore and Buhl, Johannes and Bambach, Markus}, title = {Paddle shape optimization for hole-flanging by paddle forming through the use of a predefined strain path in finite element analysis}, series = {Journal of Machine Engineering}, volume = {Vol. 19}, journal = {Journal of Machine Engineering}, number = {2}, issn = {1895-7595}, doi = {10.5604/01.3001.0013.2226}, pages = {83 -- 98}, language = {en} } @misc{HajavifardMaqboolSchmiedtKalenbornetal., author = {Hajavifard, Ramin and Maqbool, Fawad and Schmiedt-Kalenborn, Anke and Buhl, Johannes and Bambach, Markus}, title = {Integrated Forming and Surface Engineering of Disc Springs by Inducing Residual Stresses by Incremental Sheet Forming}, series = {Materials}, volume = {12}, journal = {Materials}, number = {10}, issn = {1996-1944}, doi = {10.3390/ma12101646}, pages = {19}, language = {en} } @misc{MaqboolHajavifardWaltheretal., author = {Maqbool, Fawad and Hajavifard, Ramin and Walther, Frank and Bambach, Markus}, title = {Experimental investigation and finite element modelling of residual stress control in disc springs made of metastable austenitic stainless steel (MASS) using incremental sheet forming (ISF)}, series = {Procedia Manufacturing}, volume = {Vol. 29}, journal = {Procedia Manufacturing}, issn = {2351-9789}, doi = {10.1016/j.promfg.2019.02.099}, pages = {12 -- 20}, language = {en} } @misc{BambachHerty, author = {Bambach, Markus and Herty, Michael}, title = {Model Predictive Control of the Punch Speed for Damage Reduction in Isothermal Hot Forming}, series = {Materials Science Forum}, volume = {949}, journal = {Materials Science Forum}, doi = {10.4028/www.scientific.net/MSF.949.1}, pages = {6}, language = {en} } @misc{SilzeSchnickSizovaetal., author = {Silze, Frank and Schnick, Michael and Sizova, Irina and Bambach, Markus}, title = {Laser Metal Deposition of Ti-6Al-4V with a Direct Diode Laser Set-up and Coaxial Material Feed}, series = {Procedia Manufacturing}, volume = {47}, journal = {Procedia Manufacturing}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.156}, pages = {1154 -- 1158}, language = {en} } @misc{KloeppelMertenHaufeetal., author = {Kl{\"o}ppel, Thomas and Merten, Mathias and Haufe, Andre and Buhl, Johannes and Bambach, Markus}, title = {On the Numerical Prediction of Process-Dependent Properties of Current High-Performance Materials with Material Model *MAT_254 in LS-DYNA}, series = {Procedia Manufacturing : 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing : 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.341}, pages = {1520 -- 1525}, language = {en} } @misc{NguyenBuhlBambach, author = {Nguyen, Lam and Buhl, Johannes and Bambach, Markus}, title = {Multi-bead Overlapping Models for Tool Path Generation in Wire-Arc Additive Manufacturing Processes}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.129}, pages = {1123 -- 1128}, language = {en} } @misc{HamaSalehWeisheitSchleifenbaumetal., author = {Hama-Saleh, Rebar and Weisheit, Andreas and Schleifenbaum, Johannes Henrich and {\"U}nsal, Ismail and Sviridov, Alexander and Bambach, Markus}, title = {Formability Analysis of Micro-Alloyed Sheet Metals Reinforced by Additive Manufacturing}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.317}, pages = {1023 -- 1028}, language = {en} } @misc{MichlSydowBambach, author = {Michl, Dennis and Sydow, Benjamin and Bambach, Markus}, title = {Ring Rolling of Pre-forms Made by Wire-arc Additive Manufacturing}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.275}, pages = {342 -- 348}, language = {en} } @misc{MeinersIhneJuergensetal., author = {Meiners, Frank and Ihne, J{\"o}rg and J{\"u}rgens, Pascal and Hemes, Susanne and Mathes, Michael and Sizova, Irina and Bambach, Markus and Hama-Saleh, Rebar and Weisheit, Andreas}, title = {New Hybrid Manufacturing Routes Combining Forging and Additive Manufacturing to Efficiently Produce High Performance Components from Ti-6Al-4V}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.215}, pages = {261 -- 267}, language = {en} } @misc{HartRawungBuhlBambach, author = {Hart-Rawung, Thawin and Buhl, Johannes and Bambach, Markus}, title = {A Fast Approach for Optimization of Hot Stamping Based on Machine Learning of Phase Transformation Kinetics}, series = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, volume = {47}, journal = {Procedia Manufacturing; Part of Special issue: 23rd International Conference on Material Forming}, editor = {Bambach, Markus}, issn = {2351-9789}, doi = {10.1016/j.promfg.2020.04.218}, pages = {707 -- 712}, language = {en} } @misc{MishurovaSydowThiedeetal., author = {Mishurova, Tatjana and Sydow, Benjamin and Thiede, Tobias and Sizova, Irina and Ulbricht, Alexander and Bambach, Markus and Bruno, Giovanni}, title = {Residual Stress and Microstructure of a Ti-6Al-4V Wire Arc Additive Manufacturing Hybrid Demonstrator}, series = {Metals}, volume = {6}, journal = {Metals}, number = {10}, issn = {2075-4701}, doi = {10.3390/met10060701}, language = {en} } @misc{NguyenBuhlBambach, author = {Nguyen, Lam and Buhl, Johannes and Bambach, Markus}, title = {Continuous Eulerian tool path strategies for wire-arc additive manufacturing of rib-web structures with machine-learning-based adaptive void filling}, series = {Additive Manufacturing}, volume = {Vol. 35}, journal = {Additive Manufacturing}, issn = {2214-8604}, doi = {10.1016/j.addma.2020.101265}, pages = {17}, language = {en} } @misc{BambachSizovaSydowetal., author = {Bambach, Markus and Sizova, Irina and Sydow, Benjamin and Hemes, Susanne and Meiners, Frank}, title = {Hybrid manufacturing of components from Ti-6Al-4V by metal forming and wire-arc additive manufacturing}, series = {Journal of Materials Processing Technology}, journal = {Journal of Materials Processing Technology}, number = {Vol. 282}, issn = {0924-0136}, doi = {10.1016/j.jmatprotec.2020.116689}, pages = {8}, language = {en} } @misc{GagliardiAmbrogioConteetal., author = {Gagliardi, Francesco and Ambrogio, Giuseppina and Conte, Romina and Bambach, Markus}, title = {Extruded joining elements manufactured by friction stir forming: an investigation of the process parameters}, series = {The International Journal of Advanced Manufacturing Technology}, volume = {106}, journal = {The International Journal of Advanced Manufacturing Technology}, number = {11-12}, issn = {1433-3015}, doi = {10.1007/s00170-020-04992-w}, pages = {5559 -- 5570}, language = {en} } @misc{ImranAfzalBuhletal., author = {Imran, Muhammad and Afzal, Muhammad Junaid and Buhl, Johannes and Bambach, Markus and Dunlap, Anthony and Schwedt, Alexander and Aretz, Anke and Wang, Shuhan and Lohmar, Johannes and Hirt, Gerhard}, title = {Evaluation of process-induced damage based on dynamic recrystallization during hot caliber rolling}, series = {Production Engineering}, volume = {14}, journal = {Production Engineering}, number = {1}, issn = {1863-7353}, doi = {10.1007/s11740-019-00932-0}, pages = {5 -- 16}, language = {en} }