@misc{UensalHamaSalehSviridovetal., author = {{\"U}nsal, Ismail and Hama-Saleh, Rebar and Sviridov, Alexander and Bambach, Markus and Weisheit, Andreas and Schleifenbaum, Johannes Henrich}, title = {Mechanical properties of sheet metal components with local reinforcement produced by additive manufacturing}, series = {Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018}, journal = {Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018}, publisher = {AIP Publishing}, address = {Melville, New York}, isbn = {978-0-7354-1663-5}, doi = {10.1063/1.5035054}, language = {en} } @misc{ConteBuhlAmbrogioetal., author = {Conte, Romina and Buhl, Johannes and Ambrogio, Giuseppina and Bambach, Markus}, title = {Joining of aluminum sheet and glass fiber reinforced polymer using extruded pins}, series = {Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018}, journal = {Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018}, editor = {Fratini, Livan and Di Lorenzo, Rosa and Buffa, Gianluca and Ingarao, Guiseppe}, publisher = {AIP Publishing}, address = {Melville, New York}, isbn = {978-0-7354-1663-5}, doi = {10.1063/1.5034881}, language = {en} } @misc{KlusemannBambach, author = {Klusemann, Benjamin and Bambach, Markus}, title = {Stability of phase transformation models for Ti-6Al-4V under cyclic thermal loading imposed during laser metal deposition}, series = {Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018}, journal = {Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018, Palermo, Italy, 23-25 April 2018}, editor = {Fratini, Livan and Di Lorenzo, Rosa and Buffa, Gianluca and Buffa, Gianluca}, publisher = {AIP Publishing}, address = {Melville, New York}, isbn = {978-0-7354-1663-5}, doi = {10.1063/1.5035004}, language = {en} } @misc{NguyenBuhlBambach, author = {Nguyen, Lam and Buhl, Johannes and Bambach, Markus}, title = {Decomposition algorithm for tool path planning for wire-arc additive manufacturing}, series = {Journal of Machine Engineering}, volume = {18}, journal = {Journal of Machine Engineering}, number = {1}, issn = {1895-7595}, doi = {10.5604/01.3001.0010.8827}, pages = {96 -- 107}, language = {en} } @misc{FerganiBratliBertoetal., author = {Fergani, Omar and Bratli, Wold A. and Berto, F. and Brotan, Vegard and Bambach, Markus}, title = {Study of the effect of heat treatment on fatigue crack growth behaviour of 316L stainless steel produced by selective laser melting}, series = {Fatigue \& Fracture of Engineering Materials \& Structures}, volume = {41}, journal = {Fatigue \& Fracture of Engineering Materials \& Structures}, number = {5}, issn = {1460-2695}, doi = {10.1111/ffe.12755}, pages = {1102 -- 1119}, language = {en} } @misc{YangBambachCaoetal., author = {Yang, D. Y. and Bambach, Markus and Cao, J. and Duflou, J. R. and Groche, P. and Kuboki, T. and Sterzing, A. and Tekkaya, A. Erman and Lee, C. W.}, title = {Flexibility in metal forming}, series = {CIRP Annals}, volume = {67}, journal = {CIRP Annals}, number = {2}, issn = {0007-8506}, doi = {10.1016/j.cirp.2018.05.004}, pages = {743 -- 765}, abstract = {Flexibility in metal forming is needed more than ever before due to rapidly changing customer demands. It paves the way for a better control of uncertainties in development and application of metal forming processes. Although flexibility has been pursued from various viewpoints in terms of machines, material, process, working environment and properties, etc., a thorough study of the concept was undertaken in order to with problems of manufacturing competiveness and tackle new challenges of manufacturing surroundings. Therefore, in this paper, flexibility in forming is reviewed from the viewpoints of process, material, manufacturing environment, new process combinations and machine-system-software interactions.}, language = {en} } @misc{MaqboolBambach, author = {Maqbool, Fawad and Bambach, Markus}, title = {Dominant deformation mechanisms in single point incremental forming (SPIF) and their effect on geometrical accuracy}, series = {International Journal of Mechanical Sciences}, volume = {136}, journal = {International Journal of Mechanical Sciences}, issn = {0020-7403}, doi = {10.1016/j.ijmecsci.2017.12.053}, pages = {279 -- 292}, language = {en} } @misc{BambachSizovaSilzeetal., author = {Bambach, Markus and Sizova, Irina and Silze, Frank and Schnick, Michael}, title = {Comparison of laser metal deposition of Inconel 718 from powder, hot and cold wire}, series = {Procedia CIRP}, volume = {74}, journal = {Procedia CIRP}, issn = {2212-8271}, doi = {10.1016/j.procir.2018.08.095}, pages = {206 -- 209}, abstract = {10th CIRP conference on Photonic Technologies LANE 2018, September 03 - 06, 2018, F{\"u}rth, Germany}, language = {en} } @misc{BambachSizovaEmdadi, author = {Bambach, Markus and Sizova, Irina and Emdadi, Aliakbar}, title = {Towards Damage Controlled Hot Forming}, series = {Applied Mechanics and Materials}, volume = {85}, journal = {Applied Mechanics and Materials}, issn = {1662-7482}, doi = {10.4028/www.scientific.net/AMM.885.56}, pages = {56 -- 63}, language = {en} } @misc{BambachSizovaEmdadi, author = {Bambach, Markus and Sizova, Irina and Emdadi, Aliakbar}, title = {Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting}, series = {Journal of Manufacturing Processes}, volume = {37}, journal = {Journal of Manufacturing Processes}, issn = {1526-6125}, doi = {10.1016/j.jmapro.2018.11.011}, pages = {150 -- 158}, language = {en} }