@misc{StrobelAlvaradoChavarinKnautetal., author = {Strobel, Carsten and Alvarado Chavarin, Carlos and Knaut, Martin and V{\"o}lkel, Sandra and Albert, Matthias and Hiess, Andre and Max, Benjamin and Wenger, Christian and Kirchner, Robert and Mikolajick, Thomas}, title = {High Gain Graphene Based Hot Electron Transistor with Record High Saturated Output Current Density}, series = {Advanced Electronic Materials}, volume = {10}, journal = {Advanced Electronic Materials}, number = {2}, issn = {2199-160X}, doi = {10.1002/aelm.202300624}, abstract = {Hot electron transistors (HETs) represent an exciting frontier in semiconductor technology, holding the promise of high-speed and high-frequency electronics. With the exploration of two-dimensional materials such as graphene and new device architectures, HETs are poised to revolutionize the landscape of modern electronics. This study highlights a novel HET structure with a record output current density of 800 A/cm² and a high current gain α, fabricated using a scalable fabrication approach. The HET structure comprises two-dimensional hexagonal boron nitride (hBN) and graphene layers wet transferred to a germanium substrate. The combination of these materials results in exceptional performance, particularly in terms of the highly saturated output current density. The scalable fabrication scheme used to produce the HET opens up opportunities for large-scale manufacturing. This breakthrough in HET technology holds promise for advanced electronic applications, offering high current capabilities in a practical and manufacturable device.}, language = {en} } @misc{StrobelAlvaradoChavarinKnautetal., author = {Strobel, Carsten and Alvarado Chavarin, Carlos and Knaut, Martin and Albert, Matthias and Heinzig, Andr{\´e} and Gummadi, Likhith and Wenger, Christian and Mikolajick, Thomas}, title = {p-Type Schottky contacts for graphene adjustable-Barrier phototransistors}, series = {Nanomaterials}, volume = {14}, journal = {Nanomaterials}, number = {13}, editor = {Giannazzo, Filippo and Agnello, Simonpietro and Seravalli, Luca and Bondino, Federica}, publisher = {MDPI}, issn = {2079-4991}, doi = {10.3390/nano14131140}, abstract = {The graphene adjustable-barriers phototransistor is an attractive novel device for potential high speed and high responsivity dual-band photodetection. In this device, graphene is embedded between the semiconductors silicon and germanium. Both n-type and p-type Schottky contacts between graphene and the semiconductors are required for this device. While n-type Schottky contacts are widely investigated, reports about p-type Schottky contacts between graphene and the two involved semiconductors are scarce. In this study, we demonstrate a p-type Schottky contact between graphene and p-germanium. A clear rectification with on-off ratios of close to 10 3 (±5 V) and a distinct photoresponse at telecommunication wavelengths in the infrared are achieved. Further, p-type silicon is transferred to or deposited on graphene, and we also observe rectification and photoresponse in the visible range for some of these p-type Schottky junctions. These results are an important step toward the realization of functional graphene adjustable-barrier phototransistors.}, language = {en} } @misc{HayatRatzkeAlvaradoChavarinetal., author = {Hayat, Ahsan and Ratzke, Markus and Alvarado Chavarin, Carlos and Z{\"o}llner, Marvin Hartwig and Corley-Wiciak, Agnieszka Anna and Schubert, Markus Andreas and Wenger, Christian and Fischer, Inga Anita}, title = {Structural and morphological properties of CeO2 films deposited by radio frequency magnetron sputtering for back-end-of-line integration}, series = {Thin Solid Films}, volume = {807}, journal = {Thin Solid Films}, issn = {0040-6090}, doi = {10.1016/j.tsf.2024.140547}, pages = {3}, language = {en} } @misc{StrobelAlvaradoChavarinVoelkeletal., author = {Strobel, Carsten and Alvarado Chavarin, Carlos and V{\"o}lkel, Sandra and Jahn, Andreas and Hiess, Andre and Knaut, Martin and Albert, Matthias and Wenger, Christian and Steinke, Olaff and Stephan, Ulf and R{\"o}hlecke, S{\"o}ren and Mikolajick, Thomas}, title = {Enhanced Electrical Properties of Optimized Vertical Graphene-Base Hot Electron Transistors}, series = {ACS Applied Electronic Materials}, volume = {5}, journal = {ACS Applied Electronic Materials}, number = {3}, issn = {2637-6113}, doi = {10.1021/acsaelm.2c01725}, pages = {1670 -- 1675}, abstract = {The arrival of high-mobility two-dimensional materials like graphene leads to the renaissance of former vertical semiconductor-metal-semiconductor (SMS) hot electron transistors. Because of the monolayer thickness of graphene, improved SMS transistors with a semimetallic graphene-base electrode are now feasible for high-frequency applications. In this study we report about a device that consists of amorphous silicon, graphene, and crystalline silicon. For the first time, this device is fabricated by a four-mask lithography process which leads to significant improvements in the device performance. A strongly increased common-emitter current gain of 2\% could be achieved while the on-off ratio improved to 1.6 × 105, which is already higher than predicted theoretically. This could be mainly attributed to better interface characteristics and decreased lateral dimensions of the devices. A cutoff frequency of approximately 26 MHz could be forecasted based on the DC measurements of the device.}, language = {en} } @misc{StrobelAlvaradoChavarinWengeretal., author = {Strobel, Carsten and Alvarado Chavarin, Carlos and Wenger, Christian and Albert, Matthias and Mikolajick, Thomas}, title = {Vertical Graphene-Based Transistors for Power Electronics, Optoelectronics and Radio-Frequency Applications}, series = {IEEE Nanotechnology Materials and Devices Conference (NMDC), Paestum, Italy, 22-25 October 2023}, journal = {IEEE Nanotechnology Materials and Devices Conference (NMDC), Paestum, Italy, 22-25 October 2023}, publisher = {Institute of Electrical and Electronics Engineers (IEEE)}, isbn = {979-8-3503-3546-0}, issn = {2473-0718}, doi = {10.1109/NMDC57951.2023.10344102}, pages = {196 -- 201}, abstract = {The combination of two-dimensional materials, such as graphene, with established thin films offers great opportunities for enabling next-generation vertical transistors for various applications. This paper gives a brief overview about different vertical transistor concepts using twodimensional materials proposed so far, e.g. the hot electron transistor and the Barristor. With the arrival of twodimensional materials, the hot electron transistor also experienced a revival with predicted cut-off frequencies in the THz range. The Barristor overcomes the weak current saturation of lateral graphene field-effect transistors and high on-off ratios up to 107 were demonstrated, which are suitable parameters for logic applications. By combining a semiconductor-graphene-semiconductor design of the simplest hot electron transistor with the Barristor operating principle a new device, called graphene adjustable-barriers transistor, can be realized. This new device concept provides the potential for RF, power electronics, and optoelectronic applications.}, language = {en} } @misc{KalraAlvaradoChavarinNitschetal., author = {Kalra, Amanpreet and Alvarado Chavarin, Carlos and Nitsch, Paul-Gregor and Tschammer, Rudi and Flege, Jan Ingo and Ratzke, Markus and Zoellner, Marvin Hartwig and Schubert, Markus Andreas and Wenger, Christian and Fischer, Inga Anita}, title = {Deposition of CeOₓ/SnOₓ-based thin films via RF magnetron sputtering for resistive gas sensing applications}, series = {Physica B, Condensed matter}, volume = {723}, journal = {Physica B, Condensed matter}, publisher = {Elsevier BV}, address = {Amsterdam}, issn = {0921-4526}, doi = {10.1016/j.physb.2025.418098}, pages = {1 -- 7}, abstract = {Cerium oxide-tin oxide (CeOx/SnOx) thin films with varying Sn content were deposited using RF magnetron sputtering and investigated for hydrogen sensing applications. Structural, compositional, and morphological properties were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX). Gas sensing measurements showed effective hydrogen detection at room temperature, with the sensitivity strongly influenced by Sn content and oxygen vacancy concentration. Higher Sn concentration enhanced the sensing response, which was correlated with microstructural features obtained from AFM and EDX, as well as with the presence of Ce3+ and Ce4+ oxidation states identified by XPS. This study highlights the potential of CeOx/SnOx thin films for possible back-end-of-line integration and provides proof-of-principle for room-temperature hydrogen sensing.}, language = {en} }