TY - CONF A1 - Batchelor, David R. A1 - Hoffmann, Patrick A1 - Schmeißer, Dieter A1 - Hulea, Iulian A1 - Brinza, Monica T1 - The Al-Fe interface of friction-welded joints T2 - Verhandlungen der Deutschen Physikalischen Gesellschaft N2 - The interface region of friction-welded joints Al-Fe samples is investigated by scanning Auger Spectroscopy, Electron Probe Micro-analysis (EPMA), X-ray Photoelectron spectroscopy, and Photoemission Electron Microscopy, performed at the synchrotron light source (BESSY). We investigated polished samples cut to obtain a cross-section of the Al-Fe joints. At the Al-Fe interface there is a small number of Fe teeth protuding into the adjacent Al-matrix. Beside this mechanical interlock mechanism we identify an Fe-Al alloy which is formed in an almost homogeneous interface layer of approximately 80 micron thickness. We determine the valence band spectra within that layer and notice that the alloying formation is limited to the interface region. In addition, the profile of both, the Fe and O distribution within the Al next to that interface is determined. A model of the friction-welding mechanism is derived and discussed in terms of the ability of achieving low temperature Fe-Al joints. KW - Fe-Al interface KW - friction-welded KW - X-ray photoelectron spectroscopy (XPS) KW - photoemission electron microscopy (PPEM) KW - scanning Auger spectroscopy KW - electron probe micro-analysis (EPMA) Y1 - 2016 UR - https://opus4.kobv.de/opus4-UBICO/frontdoor/index/index/docId/17160 PB - Deutsche Physikalische Gesellschaft CY - Bad Honnef ER -