TY - GEN A1 - Glawe, Christoph A1 - Schmidt, Heiko A1 - Kerstein, Alan R. A1 - Klein, Rupert T1 - XLES Part I: Introduction to Extended Large Eddy Simulation T2 - arXiv.org N2 - Direct numerical simulation (DNS), mostly used in fundamental turbulence research, is limited to low turbulent intensities due the current and future computer resources. Standard turbulence models, like RaNS (Reynolds averaged Navier-Stokes) and LES (Large Eddy Simulation), are applied to flows in engineering, but they miss small scale effects, which are frequently of importance, see e.g. the whole area of reactive flows, flows with apparent Prandtl or Schmidt number effects, or even wall bounded flows. A recent alternative to these standard approaches is the one-dimensional turbulence (ODT) model, which is limited to 1D sub-domains. In two papers we will provide a generalized filter strategy, called XLES (extended LES), including a formal theory (part I) and one special approach in the XLES family of models, called ODTLES (in part II (see Glawe et al. (2015))). ODTLES uses an ODT sub-grid model to describe all turbulent scales not represented by XLES, which leaves the larger scales to be simulated in 3D. This allows a turbulence modeling approach with a 3D resolution mainly independent of the turbulent intensity. Thus ODTLES is able to compute highly turbulent flows in domains of moderate complexity affordably and including the full range of turbulent and diffusive scales. The convergence of XLES to DNS is shown and the unconventional XLES advection approach is investigated in basic numerical tests. In part II, highly turbulent channel and duct flow results are discussed and show the future potential of XLES and ODTLES. Y1 - 2016 UR - https://opus4.kobv.de/opus4-UBICO/frontdoor/index/index/docId/16005 UR - http://arxiv.org/abs/1506.04930 ER -