TY - GEN A1 - Repetckii, Oleg V. A1 - Vinh, Nguyen Van A1 - Beirow, Bernd T1 - Sensitivity Analysis Regarding the Impact of Intentional Mistuning on Blisk Vibrations T2 - Mechanisms and Machine Science N2 - The effect of different intentional mistuning (IM) patterns is investigated with respect to the forced response of an academic axial blisk. It could be shown in numerical analyses that a preliminary use of sensitivity algorithms helps to understand the feasibility and efficiency of introducing geometric changes of the blades. The implementation of IM patterns requires conducting intensive sensitivity studies based on FE simulations in order to identify the consequences of slight geometrical blade modifications on natural frequencies. Typical changes might be a modification of fillet radii or partial modifications of blade thickness, which are most suitable to adjust a target natural frequency without a severe loss of aerodynamic performance. A software tool developed at Irkutsk SAU is employed to evaluate the impact of mass and stiffness contributions, and with that, geometric deviations on blade natural frequencies. Intensive blade vibration due to aerodynamic excitation of blisks is known as major source of high cycle fatigue, which may cause severe failures of turbine and compressor wheels during operation. The problem is relevant for several sectors of industry such as power generation, aviation or vehicle manufacturing. In consequence, there is a broad request of preventing any inadmissible vibration at any time. The application of IM can be regarded as powerful tool to avoid both, large forced responses and self-excited vibration. However, there is a lack of knowledge about how to implement mistuning without strong distortions of the flow passage. The main objective of this work is to close this gap based on comprehensive numerical analyses with regard to the effects of intended geometric modifications of blades on modal quantities. Using FE models, the effectiveness of the proposed block models of mistuning is analyzed with and without taking into account the operational speed of the axial impeller. In conclusion, the consequences of different IM implementations on the forced response of an academic blisk are discussed. In particular, the most promising IM patterns are identified yielding the least forced response. KW - Intentional Mistuning KW - Sensitivity KW - Blisk KW - Forced Response Y1 - 2022 UR - https://opus4.kobv.de/opus4-UBICO/frontdoor/index/index/docId/29514 SN - 2211-0992 SN - 2211-0984 VL - 125 SP - 408 EP - 415 PB - Springer CY - Cham ER -