TY - CONF A1 - Beirow, Bernd A1 - Kühhorn, Arnold A1 - Giersch, Thomas A1 - Nipkau, Jens T1 - Optimization-Aided Forced Response Analysis of a Mistuned Compressor Blisk T2 - ASME Turbo Expo 2014, Turbine Technical Conference and Exposition, Volume 7B: Structures and Dynamics, Düsseldorf, Germany, June 16–20, 2014, Paper GT2014-25915 N2 - The forced response of the first rotor of an E3E-type high pressure compressor blisk is analyzed with regard to varying mistuning, varying engine order excitations and the consideration of aeroelastic effects. For that purpose, SNM-based reduced order models are used in which the disk remains unchanged while the Young’s modulus of each blade is used to define experimentally adjusted as well as intentional mistuning patterns. The aerodynamic influence coefficient technique is employed to model aeroelastic interactions. Furthermore, based on optimization analyses and depending on the exciting EO and aerodynamic influences it is searched for the worst as well as the best mistuning distributions with respect to the maximum blade displacement. Genetic algorithms using blade stiffness variations as vector of design variables and the maximum blade displacement as objective function are applied. An allowed limit of the blades’ Young’s modulus standard deviation is formulated as secondary condition. In particular, the question is addressed if and how far the aeroelastic impact, mainly causing aerodynamic damping, combined with mistuning can even yield a reduction of the forced response compared to the ideally tuned blisk. It is shown that the strong dependence of the aerodynamic damping on the inter-blade phase angle is the main driver for a possible response attenuation considering the fundamental blade mode. The results of the optimization analyses are compared to the forced response due to real, experimentally determined frequency mistuning as well as intentional mistuning. Copyright © 2014 by Rolls-Royce Deutschland Ltd & Co KG Y1 - 2014 UR - https://opus4.kobv.de/opus4-UBICO/frontdoor/index/index/docId/11955 SN - 978-0-7918-4577-6 PB - ASME ER -