Filtern
Dokumenttyp
- Artikel (10)
- Konferenzbeitrag (9)
- ZIB-Report (7)
- Beitrag Sammelband (2)
- Forschungsdaten (1)
Gehört zur Bibliographie
- nein (29)
Schlagworte
- 2D distance map (1)
- Amira (1)
- Beton (1)
- Bildverarbeitung (1)
- Computertomografie (1)
- Cultural Heritage (1)
- HCI (1)
- Kiosk application (1)
- Korrosionserkennung (1)
- additive manufacturing (1)
We present a software-assisted workflow for the alignment and matching of filamentous structures across a 3D stack of serial images. This is achieved by combining automatic methods, visual validation, and interactive correction. After an initial alignment, the user can continuously improve the result by interactively correcting landmarks or matches of filaments. Supported by a visual quality assessment of regions that have been already inspected, this allows a trade-off between quality and manual labor. The software tool was developed to investigate cell division by quantitative 3D analysis of microtubules (MTs) in both mitotic and meiotic spindles. For this, each spindle is cut into a series of semi-thick physical sections, of which electron tomograms are acquired. The serial tomograms are then stitched and non-rigidly aligned to allow tracing and connecting of MTs across tomogram boundaries. In practice, automatic stitching alone provides only an incomplete solution, because large physical distortions and a low signal-to-noise ratio often cause experimental difficulties. To derive 3D models of spindles despite the problems related to sample preparation and subsequent data collection, semi-automatic validation and correction is required to remove stitching mistakes. However, due to the large number of MTs in spindles (up to 30k) and their resulting dense spatial arrangement, a naive inspection of each MT is too time consuming. Furthermore, an interactive visualization of the full image stack is hampered by the size of the data (up to 100 GB). Here, we present a specialized, interactive, semi-automatic solution that considers all requirements for large-scale stitching of filamentous structures in serial-section image stacks. The key to our solution is a careful design of the visualization and interaction tools for each processing step to guarantee real-time response, and an optimized workflow that efficiently guides the user through datasets.
We present a software-assisted workflow for the alignment and matching of filamentous structures across a three-dimensional (3D) stack of serial images. This is achieved by combining automatic methods, visual validation, and interactive correction. After the computation of an initial automatic matching, the user can continuously improve the result by interactively correcting landmarks or matches of filaments. Supported by a visual quality assessment of regions that have been already inspected, this allows a trade-off between quality and manual labor. The software tool was developed in an interdisciplinary collaboration between computer scientists and cell biologists to investigate cell division by quantitative 3D analysis of microtubules (MTs) in both mitotic and meiotic spindles. For this, each spindle is cut into a series of semi-thick physical sections, of which electron tomograms are acquired. The serial tomograms are then stitched and non-rigidly aligned to allow tracing and connecting of MTs across tomogram boundaries. In practice, automatic stitching alone provides only an incomplete solution, because large physical distortions and a low signal-to-noise ratio often cause experimental difficulties. To derive 3D models of spindles despite dealing with imperfect data related to sample preparation and subsequent data collection, semi-automatic validation and correction is required to remove stitching mistakes. However, due to the large number of MTs in spindles (up to 30k) and their resulting dense spatial arrangement, a naive inspection of each MT is too time-consuming. Furthermore, an interactive visualization of the full image stack is hampered by the size of the data (up to 100 GB). Here, we present a specialized, interactive, semi-automatic solution that considers all requirements for large-scale stitching of filamentous structures in serial-section image stacks. To the best of our knowledge, it is the only currently available tool which is able to process data of the type and size presented here. The key to our solution is a careful design of the visualization and interaction tools for each processing step to guarantee real-time response, and an optimized workflow that efficiently guides the user through datasets. The final solution presented here is the result of an iterative process with tight feedback loops between the involved computer scientists and cell biologists.
Purpose/Aims of the Study: Bone’s hierarchical structure can be visualized using a variety of methods. Many techniques, such as light and electron microscopy generate two-dimensional (2D) images, while micro computed tomography (μCT) allows a direct representation of the three-dimensional (3D) structure. In addition, different methods provide complementary structural information, such as the arrangement of organic or inorganic compounds. The overall aim of the present study is to answer bone research questions by linking information of different 2D and 3D imaging techniques. A great challenge in combining different methods arises from the fact that they usually reflect different characteristics of the real structure.
Materials and Methods: We investigated bone during healing by means of μCT and a couple of 2D methods. Backscattered electron images were used to qualitatively evaluate the tissue’s calcium content and served as a position map for other experimental data. Nanoindentation and X-ray scattering experiments were performed to visualize mechanical and structural properties. Results: We present an approach for the registration of 2D data in a 3D μCT reference frame, where scanning electron microscopies serve as a methodic link. Backscattered electron images are perfectly suited for registration into μCT reference frames, since both show structures based on the same physical principles. We introduce specific registration tools that have been developed to perform the registration process in a semi-automatic way.
Conclusions: By applying this routine, we were able to exactly locate structural information (e.g. mineral particle properties) in the 3D bone volume. In bone healing studies this will help to better understand basic formation, remodeling and mineralization processes.
Kurzfassung. Durch die Alkalität des Betons wird Betonstahl dauerhaft vor
Korrosion geschützt. Infolge von Chlorideintrag kann dieser Schutz nicht länger
aufrechterhalten werden und führt zu Lochkorrosion. Die zerstörungsfreie Prüfung
von Stahlbetonproben mit 3D-CT bietet die Möglichkeit, eine Probe mehrfach
gezielt vorzuschädigen und den Korrosionsfortschritt zu untersuchen. Zur Quantifizierung
des Schädigungsgrades müssen die bei dieser Untersuchung anfallenden
großen Bilddaten mit Bildverarbeitungsmethoden ausgewertet werden. Ein wesentlicher
Schritt dabei ist die Segmentierung der Bilddaten, bei der zwischen Korrosionsprodukt
(Rost), Betonstahl (BSt), Beton, Rissen, Poren und Umgebung
unterschieden werden muss. Diese Segmentierung bildet die Grundlage für statistische
Untersuchungen des Schädigungsfortschritts. Hierbei sind die Änderung
der BSt-Geometrie, die Zunahme von Korrosionsprodukten und deren Veränderung
über die Zeit sowie ihrer räumlichen Verteilung in der Probe von Interesse. Aufgrund
der Größe der CT-Bilddaten ist eine manuelle Segmentierung nicht durchführbar,
so dass automatische Verfahren unabdingbar sind. Dabei ist insbesondere
die Segmentierung der Korrosionsprodukte in den Bilddaten ein schwieriges
Problem. Allein aufgrund der Grauwerte ist eine Zuordnung nahezu unmöglich,
denn die Grauwerte von Beton und Korrosionsprodukt unterscheiden sich kaum.
Eine formbasierte Suche ist nicht offensichtlich, da die Korrosionsprodukte in Beton
diffuse Formen haben.
Allerdings lässt sich Vorwissen über die Ausbreitung der Korrosionsprodukte
nutzen. Sie bilden sich in räumlicher Nähe des BSt (in Bereichen vorheriger
Volumenabnahme des BSt), entlang von Rissen sowie in Porenräumen, die direkt
am BSt und in dessen Nahbereich liegen. Davon ausgehend wird vor der
Korrosionsprodukterkennung zunächst eine BSt-Volumen-, Riss- und Porenerkennung
durchgeführt. Dieser in der Arbeit näher beschriebene Schritt erlaubt es, halbautomatisch
Startpunkte (Seed Points) für die Korrosionsprodukterkennung zu
finden. Weiterhin werden verschiedene in der Bildverarbeitung bekannte
Algorithmen auf ihre Eignung untersucht werden.
We present iCon.text, a kiosk platform for the iPad centered around artefacts, whose content and layout can be tailored without programming skills for specific museum exhibitions. The central metaphor to access information is a virtual postcard with one front and a customizable number of back sides that provide details about exhibits to museum visitors in textual and image form. Back sides can link to others cards. Access to these postcards is possible through one or more navigation views that can be navigated to from a navigation bar.
The entry point to the application is designed as a multitouch interactive pile of cards in a playful manner that allows visitors of any age an easy approach to the presentation and interaction metaphor. To directly access a certain postcard, a mosaic view can be uitilized to provide an overview about all available exhibits. A category view groups postcards into themes. Locating artefacts on a zoomable map or exhibition floor plan allows for conveying information about spatial contexts between different objects and their location. Furthermore, contexts can be illustrated with a two stage view comprising an overview and corresponding detail views to provide further insights into the spatial, temporal, and thematic contexts of artefacts. The application scaffolding allows the design of bilingual presentations to support exhibitions with an international audience. The logo of the presenting institution or exhibition can be incorporated to display the the kiosk's corporate design branding and to access an imprint or further informations. Usage is logged into files to provide a basis for extracting statistical information about the usage.
The details about the exhibits are presented as images and as such impose no limit to the design choices made by the content provider or exhibition designer.
The application (enhanced with a panoramic view) has been integrated successfully into a large special exhibition about the ancient city of Pergamon 2011/2012 at the Pergamon Museum Berlin within the interdisciplinary project "Berlin Sculpture Network".