@inproceedings{PaetschBaumProhaskaetal., author = {Paetsch, Olaf and Baum, Daniel and Prohaska, Steffen and Ehrig, Karsten and Meinel, Dietmar and Ebell, Gino}, title = {3D Corrosion Detection in Time-dependent CT Images of Concrete}, series = {DIR-2015 Proceedings}, booktitle = {DIR-2015 Proceedings}, abstract = {In civil engineering, the corrosion of steel reinforcements in structural elements of concrete bares a risk of stability-reduction, mainly caused by the exposure to chlorides. 3D computed tomography (CT) reveals the inner structure of concrete and allows one to investigate the corrosion with non-destructive testing methods. To carry out such investigations, specimens with a large artificial crack and an embedded steel rebar have been manufactured. 3D CT images of those specimens were acquired in the original state. Subsequently three cycles of electrochemical pre-damaging together with CT imaging were applied. These time series have been evaluated by means of image processing algorithms to segment and quantify the corrosion products. Visualization of the results supports the understanding of how corrosion propagates into cracks and pores. Furthermore, pitting of structural elements can be seen without dismantling. In this work, several image processing and visualization techniques are presented that have turned out to be particularly effective for the visualization and segmentation of corrosion products. Their combination to a workflow for corrosion analysis is the main contribution of this work.}, language = {en} } @misc{HombergBaumWiebeletal., author = {Homberg, Ulrike and Baum, Daniel and Wiebel, Alexander and Prohaska, Steffen and Hege, Hans-Christian}, title = {Definition, Extraction, and Validation of Pore Structures in Porous Materials}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-42510}, abstract = {An intuitive and sparse representation of the void space of porous materials supports the efficient analysis and visualization of interesting qualitative and quantitative parameters of such materials. We introduce definitions of the elements of this void space, here called pore space, based on its distance function, and present methods to extract these elements using the extremal structures of the distance function. The presented methods are implemented by an image processing pipeline that determines pore centers, pore paths and pore constrictions. These pore space elements build a graph that represents the topology of the pore space in a compact way. The representations we derive from μCT image data of realistic soil specimens enable the computation of many statistical parameters and, thus, provide a basis for further visual analysis and application-specific developments. We introduced parts of our pipeline in previous work. In this chapter, we present additional details and compare our results with the analytic computation of the pore space elements for a sphere packing in order to show the correctness of our graph computation.}, language = {en} } @misc{HombergBaumProhaskaetal., author = {Homberg, Ulrike and Baum, Daniel and Prohaska, Steffen and G{\"u}nster, Jens and Krauß-Sch{\"u}ler, Stefanie}, title = {Adapting trabecular structures for 3D printing: an image processing approach based on µCT data}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-64004}, abstract = {Materials with a trabecular structure notably combine advantages such as lightweight, reasonable strength, and permeability for fluids. This combination of advantages is especially interesting for tissue engineering in trauma surgery and orthopedics. Bone-substituting scaffolds for instance are designed with a trabecular structure in order to allow cell migration for bone ingrowth and vascularization. An emerging and recently very popular technology to produce such complex, porous structures is 3D printing. However, several technological aspects regarding the scaffold architecture, the printable resolution, and the feature size have to be considered when fabricating scaffolds for bone tissue replacement and regeneration. Here, we present a strategy to assess and prepare realistic trabecular structures for 3D printing using image analysis with the aim of preserving the structural elements. We discuss critical conditions of the printing system and present a 3-stage approach to adapt a trabecular structure from \$\mu\$CT data while incorporating knowledge about the printing system. In the first stage, an image-based extraction of solid and void structures is performed, which results in voxel- and graph-based representations of the extracted structures. These representations not only allow us to quantify geometrical properties such as pore size or strut geometry and length. But, since the graph represents the geometry and the topology of the initial structure, it can be used in the second stage to modify and adjust feature size, volume and sample size in an easy and consistent way. In the final reconstruction stage, the graph is then converted into a voxel representation preserving the topology of the initial structure. This stage generates a model with respect to the printing conditions to ensure a stable and controlled voxel placement during the printing process.}, language = {en} } @article{HombergBaumProhaskaetal., author = {Homberg, Ulrike and Baum, Daniel and Prohaska, Steffen and G{\"u}nster, Jens and Krauß-Sch{\"u}ler, Stefanie}, title = {Adapting trabecular structures for 3D printing: an image processing approach based on µCT data}, series = {Biomedical Physics \& Engineering Express}, volume = {3}, journal = {Biomedical Physics \& Engineering Express}, number = {3}, publisher = {IOP Publishing}, doi = {10.1088/2057-1976/aa7611}, abstract = {Materials with a trabecular structure notably combine advantages such as lightweight, reasonable strength, and permeability for fluids. This combination of advantages is especially interesting for tissue engineering in trauma surgery and orthopedics. Bone-substituting scaffolds for instance are designed with a trabecular structure in order to allow cell migration for bone ingrowth and vascularization. An emerging and recently very popular technology to produce such complex, porous structures is 3D printing. However, several technological aspects regarding the scaffold architecture, the printable resolution, and the feature size have to be considered when fabricating scaffolds for bone tissue replacement and regeneration. Here, we present a strategy to assess and prepare realistic trabecular structures for 3D printing using image analysis with the aim of preserving the structural elements. We discuss critical conditions of the printing system and present a 3-stage approach to adapt a trabecular structure from \$\mu\$CT data while incorporating knowledge about the printing system. In the first stage, an image-based extraction of solid and void structures is performed, which results in voxel- and graph-based representations of the extracted structures. These representations not only allow us to quantify geometrical properties such as pore size or strut geometry and length. But, since the graph represents the geometry and the topology of the initial structure, it can be used in the second stage to modify and adjust feature size, volume and sample size in an easy and consistent way. In the final reconstruction stage, the graph is then converted into a voxel representation preserving the topology of the initial structure. This stage generates a model with respect to the printing conditions to ensure a stable and controlled voxel placement during the printing process.}, language = {en} } @article{PaetschBaumProhaskaetal., author = {Paetsch, Olaf and Baum, Daniel and Prohaska, Steffen and Ehrig, Karsten and Ebell, Gino and Meinel, Dietmar and Heyn, Andreas}, title = {Korrosionsverfolgung in 3D-computertomographischen Aufnahmen von Stahlbetonproben}, series = {DGZfP-Jahrestagung 2014 Konferenzband}, journal = {DGZfP-Jahrestagung 2014 Konferenzband}, language = {de} } @article{KnoetelSeidelProhaskaetal., author = {Kn{\"o}tel, David and Seidel, Ronald and Prohaska, Steffen and Dean, Mason N. and Baum, Daniel}, title = {Automated Segmentation of Complex Patterns in Biological Tissues: Lessons from Stingray Tessellated Cartilage}, series = {PLOS ONE}, journal = {PLOS ONE}, doi = {10.1371/journal.pone.0188018}, abstract = {Introduction - Many biological structures show recurring tiling patterns on one structural level or the other. Current image acquisition techniques are able to resolve those tiling patterns to allow quantitative analyses. The resulting image data, however, may contain an enormous number of elements. This renders manual image analysis infeasible, in particular when statistical analysis is to be conducted, requiring a larger number of image data to be analyzed. As a consequence, the analysis process needs to be automated to a large degree. In this paper, we describe a multi-step image segmentation pipeline for the automated segmentation of the calcified cartilage into individual tesserae from computed tomography images of skeletal elements of stingrays. Methods - Besides applying state-of-the-art algorithms like anisotropic diffusion smoothing, local thresholding for foreground segmentation, distance map calculation, and hierarchical watershed, we exploit a graph-based representation for fast correction of the segmentation. In addition, we propose a new distance map that is computed only in the plane that locally best approximates the calcified cartilage. This distance map drastically improves the separation of individual tesserae. We apply our segmentation pipeline to hyomandibulae from three individuals of the round stingray (Urobatis halleri), varying both in age and size. Results - Each of the hyomandibula datasets contains approximately 3000 tesserae. To evaluate the quality of the automated segmentation, four expert users manually generated ground truth segmentations of small parts of one hyomandibula. These ground truth segmentations allowed us to compare the segmentation quality w.r.t. individual tesserae. Additionally, to investigate the segmentation quality of whole skeletal elements, landmarks were manually placed on all tesserae and their positions were then compared to the segmented tesserae. With the proposed segmentation pipeline, we sped up the processing of a single skeletal element from days or weeks to a few hours.}, language = {en} } @misc{KnoetelSeidelZaslanskyetal., author = {Kn{\"o}tel, David and Seidel, Ronald and Zaslansky, Paul and Prohaska, Steffen and Dean, Mason N. and Baum, Daniel}, title = {Automated Segmentation of Complex Patterns in Biological Tissues: Lessons from Stingray Tessellated Cartilage (Supplementary Material)}, doi = {10.12752/4.DKN.1.0}, abstract = {Supplementary data to reproduce and understand key results from the related publication, including original image data and processed data. In particular, sections from hyomandibulae harvested from specimens of round stingray Urobatis halleri, donated from another study (DOI: 10.1002/etc.2564). Specimens were from sub-adults/adults collected by beach seine from collection sites in San Diego and Seal Beach, California, USA. The hyomandibulae were mounted in clay, sealed in ethanol-humidified plastic tubes and scanned with a Skyscan 1172 desktop μCT scanner (Bruker μCT, Kontich, Belgium) in association with another study (DOI: 10.1111/joa.12508). Scans for all samples were performed with voxel sizes of 4.89 μm at 59 kV source voltage and 167 μA source current, over 360◦ sample 120 rotation. For our segmentations, the datasets were resampled to a voxel size of 9.78 μm to reduce the size of the images and speed up processing. In addition, the processed data that was generated with the visualization software Amira with techniques described in the related publication based on the mentioned specimens.}, language = {en} } @inproceedings{HombergBaumProhaska2011, author = {Homberg, Ulrike and Baum, Daniel and Prohaska, Steffen}, title = {Describing and Analyzing the Dual Structures of Porous Media}, series = {Proc. 3D-Microstructure Meeting}, booktitle = {Proc. 3D-Microstructure Meeting}, editor = {M{\"u}cklich, Frank and Slussallek, Philipp and Schladitz, Katja}, pages = {24 -- 25}, year = {2011}, language = {en} } @inproceedings{WeberMoellerVerbavatzetal.2011, author = {Weber, Britta and M{\"o}ller, Marit and Verbavatz, Jean-Marc and Baum, Daniel and Hege, Hans-Christian and Prohaska, Steffen}, title = {Fast Tracing of Microtubule Centerlines in Electron Tomograms}, series = {BioVis 2011 Abstracts, 1st IEEE Symposium on Biological Data Visualization}, booktitle = {BioVis 2011 Abstracts, 1st IEEE Symposium on Biological Data Visualization}, year = {2011}, language = {en} } @inproceedings{PaetschBaumEhrigetal.2012, author = {Paetsch, Olaf and Baum, Daniel and Ehrig, Karsten and Meinel, Dietmar and Prohaska, Steffen}, title = {Vergleich automatischer 3D-Risserkennungsmethoden f{\"u}r die quantitative Analyse der Schadensentwicklung in Betonproben mit Computer-Tomographie}, series = {Tagungsband der DACH Jahrestagung 2012}, booktitle = {Tagungsband der DACH Jahrestagung 2012}, year = {2012}, language = {de} }