@article{AkbariShandizBoulosSavarssonetal.2017, author = {Akbari Shandiz, Mohsen and Boulos, Paul and S{\ae}varsson, Stefan and Ramm, Heiko and Fu, Chun Kit and Miller, Stephen and Zachow, Stefan and Anglin, Carolyn}, title = {Changes in Knee Shape and Geometry Resulting from Total Knee Arthroplasty}, series = {Journal of Engineering in Medicine}, volume = {232}, journal = {Journal of Engineering in Medicine}, number = {1}, doi = {10.1177/0954411917743274}, pages = {67 -- 79}, year = {2017}, abstract = {Changes in knee shape and geometry resulting from total knee arthroplasty can affect patients in numerous important ways: pain, function, stability, range of motion, and kinematics. Quantitative data concerning these changes have not been previously available, to our knowledge, yet are essential to understand individual experiences of total knee arthroplasty and thereby improve outcomes for all patients. The limiting factor has been the challenge of accurately measuring these changes. Our study objective was to develop a conceptual framework and analysis method to investigate changes in knee shape and geometry, and prospectively apply it to a sample total knee arthroplasty population. Using clinically available computed tomography and radiography imaging systems, the three-dimensional knee shape and geometry of nine patients (eight varus and one valgus) were compared before and after total knee arthroplasty. All patients had largely good outcomes after their total knee arthroplasty. Knee shape changed both visually and numerically. On average, the distal condyles were slightly higher medially and lower laterally (range: +4.5 mm to -4.4 mm), the posterior condyles extended farther out medially but not laterally (range: +1.8 to -6.4 mm), patellofemoral distance increased throughout flexion by 1.8-3.5 mm, and patellar thickness alone increased by 2.9 mm (range: 0.7-5.2 mm). External femoral rotation differed preop and postop. Joint line distance, taking cartilage into account, changed by +0.7 to -1.5 mm on average throughout flexion. Important differences in shape and geometry were seen between pre-total knee arthroplasty and post-total knee arthroplasty knees. While this is qualitatively known, this is the first study to report it quantitatively, an important precursor to identifying the reasons for the poor outcome of some patients. Using the developed protocol and visualization techniques to compare patients with good versus poor clinical outcomes could lead to changes in implant design, implant selection, component positioning, and surgical technique. Recommendations based on this sample population are provided. Intraoperative and postoperative feedback could ultimately improve patient satisfaction.}, language = {en} } @article{SaevarssonSharmaAmirietal.2012, author = {Saevarsson, Stefan and Sharma, Gulshan and Amiri, Shahram and Montgomery, Sigrun and Ramm, Heiko and Lichti, Derek and Lieck, Robert and Zachow, Stefan and Anglin, Carolyn}, title = {Radiological method for measuring patellofemoral tracking and tibiofemoral kinematics before and after total knee replacement}, series = {Bone and Joint Research}, volume = {1}, journal = {Bone and Joint Research}, number = {10}, doi = {10.1302/2046-3758.110.2000117}, pages = {263 -- 271}, year = {2012}, language = {en} } @misc{SharmaHoSaevarssonetal.2012, author = {Sharma, Gulshan and Ho, Karen and Saevarsson, Stefan and Ramm, Heiko and Lieck, Robert and Zachow, Stefan and Anglin, Carolyn}, title = {Knee Pose and Geometry Pre- and Post-Total Knee Arthroplasty Using Computed Tomography}, series = {58th Annual Meeting of the Orthopaedic Research Society (ORS)}, journal = {58th Annual Meeting of the Orthopaedic Research Society (ORS)}, address = {San Francisco, CA}, year = {2012}, language = {en} } @misc{SharmaSaevarssonAmirietal.2012, author = {Sharma, Gulshan and Saevarsson, Stefan and Amiri, Shahram and Montgomery, Sigrun and Ramm, Heiko and Lichti, Derek and Zachow, Stefan and Anglin, Carolyn}, title = {Sequential-Biplane Radiography for Measuring Pre and Post Total Knee Arthroplasty Kinematics}, series = {58th Annual Meeting of the Orthopaedic Research Society (ORS)}, journal = {58th Annual Meeting of the Orthopaedic Research Society (ORS)}, address = {San Francisco, CA}, year = {2012}, language = {en} } @inproceedings{StefanGulshanSigrunetal.2012, author = {Stefan, Saevarsson and Gulshan, Sharma and Sigrun, Montgomery and Karen, Ho and Ramm, Heiko and Lieck, Robert and Zachow, Stefan and Hutchison, Carol and Jason, Werle and Carolyn, Anglin}, title = {Kinematic Comparison Between Gender Specific and Traditional Femoral Implants}, series = {67th Canadian Orthopaedic Association (COA) Annual Meeting}, booktitle = {67th Canadian Orthopaedic Association (COA) Annual Meeting}, year = {2012}, language = {en} } @article{HoSaevarssonRammetal.2012, author = {Ho, Karen and Saevarsson, Stefan and Ramm, Heiko and Lieck, Robert and Zachow, Stefan and Sharma, Gulshan and Rex, Erica and Amiri, Shahram and Wu, Barnabas and Leumann, Andre and Anglin, Carolyn}, title = {Computed tomography analysis of knee pose and geometry before and after total knee arthroplasty}, series = {Journal of biomechanics}, volume = {45}, journal = {Journal of biomechanics}, number = {13}, doi = {10.1016/j.jbiomech.2012.06.004}, pages = {2215 -- 21}, year = {2012}, language = {en} } @article{HildebrandtGoubergritsHepptetal.2013, author = {Hildebrandt, Thomas and Goubergrits, Leonid and Heppt, Werner and Bessler, Stefan and Zachow, Stefan}, title = {Evaluation of the Intranasal Flow Field through Computational Fluid Dynamics (CFD)}, series = {Journal of Facial and Plastic Surgery}, volume = {29}, journal = {Journal of Facial and Plastic Surgery}, number = {2}, publisher = {Thieme}, doi = {10.1055/s-0033-1341591}, pages = {93 -- 98}, year = {2013}, language = {en} } @article{SaevarssonSharmaRammetal.2013, author = {Saevarsson, Stefan and Sharma, Gulshan and Ramm, Heiko and Lieck, Robert and Hutchison, Carol and Werle, Jason and Montgomery, Sigrun and Romeo, Carolina and Zachow, Stefan and Anglin, Carolyn}, title = {Kinematic Differences Between Gender Specific And Traditional Knee Implants}, series = {The Journal of Arthroplasty}, volume = {28}, journal = {The Journal of Arthroplasty}, number = {9}, doi = {10.1016/j.arth.2013.01.021}, pages = {1543 -- 1550}, year = {2013}, language = {en} } @misc{KoberSaderZeilhoferetal., author = {Kober, Cornelia and Sader, Robert and Zeilhofer, Hans-Florian and Prohaska, Steffen and Zachow, Stefan and Deuflhard, Peter}, title = {Anisotrope Materialmodellierung f{\"u}r den menschlichen Unterkiefer}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-6574}, number = {01-31}, abstract = {Im Rahmen der biomechanischen Simulation kn{\"o}cherner Organe ist die Frage nach einer befriedigenden Materialbeschreibung nach wie vor ungel{\"o}st. Computertomographische Datens{\"a}tze liefern eine r{\"a}umliche Verteilung der (R{\"o}ntgen-)Dichte und erm{\"o}glichen damit eine gute Darstellung der individuellen Geometrie. Weiter k{\"o}nnen die verschiedenen Materialbestandteile des Knochens, Spongiosa und Kortikalis, voneinander getrennt werden. Aber die richtungsab{\"a}ngige Information der Materialanisotropie ist verloren. In dieser Arbeit wird ein Ansatz f{\"u}r eine anisotrope Materialbeschreibung vorgestellt, die es erm{\"o}glicht, den Einfluss der individuellen kn{\"o}chernen Struktur auf das makroskopische Materialverhalten abzusch{\"a}tzen.}, language = {de} } @misc{HegeMerzkyZachow, author = {Hege, Hans-Christian and Merzky, Andre and Zachow, Stefan}, title = {Distributed Visualization with OpenGL Vizserver: Practical Experiences}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-5992}, number = {00-31}, abstract = {The increasing demand for distributed solutions in computing technology does not stop when it comes to visualization techniques. However, the capabilities of todays applications to perform remote rendering are limited by historical design legacys. Especially the popular X11 protokoll, which has been proven to be extremely flexible and usefull for remote 2D graphics applications, breaks down for the case of remote 3D rendering. In this white paper, we give a short overview of generic remote rendering technologies available today, and compare their performance to the recently released vizserver by SGI: a network extension to the SGI OpenGL rendering engines.}, language = {en} } @misc{DeuflhardDoesselLouisetal., author = {Deuflhard, Peter and D{\"o}ssel, Olaf and Louis, Alfred and Zachow, Stefan}, title = {Mehr Mathematik wagen in der Medizin}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-10776}, number = {08-25}, abstract = {Der Artikel gibt einen Einblick in das reiche Feld der Zusammenarbeit zwischen Mathematik und Medizin. Beispielhaft werden drei Erfolgsmodelle dargestellt: Medizinische Bildgebung, mathematische Modellierung und Biosignalverarbeitung im Bereich der Dynamik des Herzens sowie mathematische Modellierung und Simulation in der Krebstherapie Hyperthermie und der Mund-Kiefer-Gesichts-Chirurgie. In allen F{\"a}llen existiert ein Gleichklang der Interessen von Medizin und Mathematik: Beide Disziplinen wollen die Resultate schnell und zuverl{\"a}ssig. F{\"u}r die Klinik heißt das, dass notwendige Rechnungen in m{\"o}glichst kurzer Zeit, und zwar auf dem PC, ablaufen m{\"u}ssen und dass die Resultate so genau und belastbar sein m{\"u}ssen, dass medizinische Entscheidungen darauf aufbauen k{\"o}nnen. F{\"u}r die Mathematik folgt daraus, dass h{\"o}chste Anforderungen an die Effizienz der verwendeten Algorithmen und die darauf aufbauende Software in Numerik und Visualisierung zu stellen sind. Jedes Kapitel endet mit einer Darstellung der Perspektive des jeweiligen Gebietes. Abschließend werden m{\"o}gliche Handlungsoptionen f{\"u}r Politik und Wirtschaft diskutiert.}, language = {de} } @phdthesis{Zachow, author = {Zachow, Stefan}, title = {Computergest{\"u}tzte 3D Osteotomieplanung in der Mund-Kiefer-Gesichtschirurgie unter Ber{\"u}cksichtigung der r{\"a}umlichen Weichgewebeanordnung}, isbn = {3899631986}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-10432}, abstract = {In der Arbeit wird die computergest{\"u}tzte Planung von chirurgisch gesetzten Knochenfrakturen bzw. Knochenschnitten (sogenannten Osteotomien) an dreidimensionalen, computergrafischen Sch{\"a}delmodellen, sowie die Umpositionierung separierter kn{\"o}cherner Segmente im Kontext der rekonstruktiven MKG-Chirurgie behandelt. Durch die 3D Modellierung und Visualisierung anatomischer Strukturen, sowie der 3D Osteotomie- und Umstellungsplanung unter Einbeziehung der resultierenden Weichgewebedeformation wird den Chirurgen ein Werkzeug an die Hand gegeben, mit dem eine Therapieplanung am Computer durchgef{\"u}hrt und diese in Hinblick auf Funktion und {\"A}sthetik bewertet werden kann. Unterschiedliche Strategien k{\"o}nnen dabei erprobt und in ihrer Auswirkung erfasst werden. Dazu wird ein methodischer Ansatz vorgestellt, der zum einen die chirurgische Planung im Vergleich zu existierenden Ans{\"a}tzen deutlich verbessert und zum anderen eine robuste Weichgewebeprognose, durch den Einsatz geeigneter Planungsmodelle und eines physikalisch basierten Weichgewebemodells unter Nutzung numerischer L{\"o}sungsverfahren in die Planung integriert. Die Visualisierung der Planungsergebnisse erlaubt sowohl eine anschauliche und {\"u}berzeugende, pr{\"a}operative Patientenaufkl{\"a}rung, als auch die Demonstration m{\"o}glicher Vorgehensweisen und deren Auswirkungen f{\"u}r die chirurgische Ausbildung. Ferner erg{\"a}nzen die Planungsdaten die Falldokumentation und liefern einen Beitrag zur Qualit{\"a}tssicherung. Die Arbeit ist in sieben Kapitel gegliedert und wie folgt strukturiert: Zuerst wird die medizinische Aufgabenstellung bei der chirurgischen Rekonstruktion von Knochenfehlbildungen und -fehlstellungen in der kraniofazialen Chirurgie sowie die daraus resultierenden Anforderungen an die Therapieplanung beschrieben. Anschließend folgt ein umfassender {\"U}berblick {\"u}ber entsprechende Vorarbeiten zur computergest{\"u}tzten Planung knochenverlagernder Operationen und eine kritische Bestandsaufnahme der noch vorhandenen Defizite. Nach der Vorstellung des eigenen Planungsansatzes wird die Generierung individueller, qualitativ hochwertiger 3D Planungsmodelle aus tomografischen Bilddaten beschrieben, die den Anforderungen an eine intuitive, 3D Planung von Umstellungsosteotomien entsprechen und eine Simulation der daraus resultierenden Weichgewebedeformation mittels der Finite-Elemente Methode (FEM) erm{\"o}glichen. Die Methoden der 3D Schnittplanung an computergrafischen Modellen werden analysiert und eine 3D Osteotomieplanung an polygonalen Sch{\"a}delmodellen entwickelt, die es erm{\"o}glicht, intuitiv durch Definition von Schnittlinien am 3D Knochenmodell, eine den chirurgischen Anforderungen entsprechende Schnittplanung unter Ber{\"u}cksichtigung von Risikostrukturen durchzuf{\"u}hren. Separierte Knochensegmente lassen sich im Anschluss interaktiv umpositionieren und die resultierende Gesamtanordnung hinsichtlich einer funktionellen Rehabilitation bewerten. Aufgrund des in dieser Arbeit gew{\"a}hlten, physikalisch basierten Modellierungsansatzes kann unter Ber{\"u}cksichtigung des gesamten Weichgewebevolumens aus der Knochenverlagerung direkt die resultierende Gesichtsform berechnet werden. Dies wird anhand von 13 exemplarischen Fallstudien anschaulich demonstriert, wobei die Prognosequalit{\"a}t mittels postoperativer Fotografien und postoperativer CT-Daten {\"u}berpr{\"u}ft und belegt wird. Die Arbeit wird mit einem Ausblick auf erweiterte Modellierungsans{\"a}tze und einem Konzept f{\"u}r eine integrierte, klinisch einsetzbare Planungsumgebung abgeschlossen.}, language = {de} } @misc{ZachowZilskeHege, author = {Zachow, Stefan and Zilske, Michael and Hege, Hans-Christian}, title = {3D reconstruction of individual anatomy from medical image data: Segmentation and geometry processing}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-10440}, number = {07-41}, abstract = {For medical diagnosis, visualization, and model-based therapy planning three-dimensional geometric reconstructions of individual anatomical structures are often indispensable. Computer-assisted, model-based planning procedures typically cover specific modifications of "virtual anatomy" as well as numeric simulations of associated phenomena, like e.g. mechanical loads, fluid dynamics, or diffusion processes, in order to evaluate a potential therapeutic outcome. Since internal anatomical structures cannot be measured optically or mechanically in vivo, three-dimensional reconstruction of tomographic image data remains the method of choice. In this work the process chain of individual anatomy reconstruction is described which consists of segmentation of medical image data, geometrical reconstruction of all relevant tissue interfaces, up to the generation of geometric approximations (boundary surfaces and volumetric meshes) of three-dimensional anatomy being suited for finite element analysis. All results presented herein are generated with amira ® - a highly interactive software system for 3D data analysis, visualization and geometry reconstruction.}, language = {en} } @article{GladilinZachowDeuflhardetal.2002, author = {Gladilin, Evgeny and Zachow, Stefan and Deuflhard, Peter and Hege, Hans-Christian}, title = {A nonlinear elastic soft tissue model for craniofacial surgery simulations}, series = {ESAIM, Proc.}, volume = {12}, journal = {ESAIM, Proc.}, doi = {10.1051/proc:2002011}, pages = {61 -- 66}, year = {2002}, language = {en} } @inproceedings{GladilinZachowDeuflhardetal.2002, author = {Gladilin, Evgeny and Zachow, Stefan and Deuflhard, Peter and Hege, Hans-Christian}, title = {A nonlinear soft tissue model for craniofacial surgery simulations}, series = {Proc. of Modeling and Simulation for Computer-aided Medicine and Surgery (MS4CMS}, booktitle = {Proc. of Modeling and Simulation for Computer-aided Medicine and Surgery (MS4CMS}, publisher = {INRIA}, address = {Paris, France}, year = {2002}, language = {en} } @inproceedings{GladilinZachowDeuflhardetal.2002, author = {Gladilin, Evgeny and Zachow, Stefan and Deuflhard, Peter and Hege, Hans-Christian}, title = {Biomechanical modeling of individual facial emotion expressions}, series = {Proc. of Visualization, Imaging, and Image Processing (VIIP)}, booktitle = {Proc. of Visualization, Imaging, and Image Processing (VIIP)}, address = {Malaga, Spain}, pages = {7 -- 11}, year = {2002}, language = {en} } @article{DeuflhardWeiserZachow2006, author = {Deuflhard, Peter and Weiser, Martin and Zachow, Stefan}, title = {Mathematics in Facial Surgery}, series = {AMS Notices}, volume = {53}, journal = {AMS Notices}, number = {9}, pages = {1012 -- 1016}, year = {2006}, language = {en} } @inproceedings{GladilinZachowDeuflhardetal.2002, author = {Gladilin, Evgeny and Zachow, Stefan and Deuflhard, Peter and Hege, Hans-Christian}, title = {Biomechanisches Modell zur Absch{\"a}tzung der individuellen Gesichtsmimik}, series = {Proc.of Workshop Bildverarbeitung f{\"u}r die Medizin (BVM)}, booktitle = {Proc.of Workshop Bildverarbeitung f{\"u}r die Medizin (BVM)}, editor = {Meiler, M. and Saupe, D. and Krugel, F. and Handels, H. and Lehmann, T.}, address = {Leipzig, Germany}, pages = {25 -- 28}, year = {2002}, language = {en} } @incollection{ZachowWeiserHegeetal.2005, author = {Zachow, Stefan and Weiser, Martin and Hege, Hans-Christian and Deuflhard, Peter}, title = {Soft Tissue Prediction in Computer Assisted Maxillofacial Surgery Planning}, series = {Biomechanics Applied to Computer Assisted Surgery}, booktitle = {Biomechanics Applied to Computer Assisted Surgery}, editor = {Payan, Y.}, publisher = {Research Signpost}, pages = {277 -- 298}, year = {2005}, language = {en} } @incollection{ZachowWeiserDeuflhard2008, author = {Zachow, Stefan and Weiser, Martin and Deuflhard, Peter}, title = {Modellgest{\"u}tzte Operationsplanung in der Kopfchirurgie}, series = {Modellgest{\"u}tzte Therapie}, booktitle = {Modellgest{\"u}tzte Therapie}, editor = {Niederlag, Wolfgang and Lemke, Heinz and Meixensberger, J{\"u}rgen and Baumann, Michael}, publisher = {Health Academy}, pages = {140 -- 156}, year = {2008}, language = {en} } @article{ZeilhoferZachowFairleyetal.2000, author = {Zeilhofer, Hans-Florian and Zachow, Stefan and Fairley, Jeffrey and Sader, Robert and Deuflhard, Peter}, title = {Treatment Planning and Simulation in Craniofacial Surgery with Virtual Reality Techiques}, series = {Journal of Cranio-Maxillofacial Surgery}, volume = {28 (Suppl. 1)}, journal = {Journal of Cranio-Maxillofacial Surgery}, pages = {82}, year = {2000}, language = {en} } @article{CampoliBakaKapteinetal., author = {Campoli, Gianni and Baka, Nora and Kaptein, Bart and Valstar, Edward and Zachow, Stefan and Weinans, Harrie and Zadpoor, Amir Abbas}, title = {Relationship between the shape and density distribution of the femur and its natural frequencies of vibration}, series = {Journal of Biomechanics}, volume = {47}, journal = {Journal of Biomechanics}, publisher = {Elsevier}, doi = {10.1016/j.jbiomech.2014.08.008}, pages = {3334 -- 3343}, abstract = {It has been recently suggested that mechanical loads applied at frequencies close to the natural frequencies of bone could enhance bone apposition due to the resonance phenomenon. Other applications of bone modal analysis are also suggested. For the above-mentioned applications, it is important to understand how patient-specific bone shape and density distribution influence the natural frequencies of bones. We used finite element models to study the effects of bone shape and density distribution on the natural frequencies of the femur in free boundary conditions. A statistical shape and appearance model that describes shape and density distribution independently was created, based on a training set of 27 femora. The natural frequencies were then calculated for different shape modes varied around the mean shape while keeping the mean density distribution, for different appearance modes around the mean density distribution while keeping the mean bone shape, and for the 27 training femora. Single shape or appearance modes could cause up to 15\% variations in the natural frequencies with certain modes having the greatest impact. For the actual femora, shape and density distribution changed the natural frequencies by up to 38\%. First appearance mode that describes the general cortical bone thickness and trabecular bone density had one of the strongest impacts. The first appearance mode could therefore provide a sensitive measure of general bone health and disease progression. Since shape and density could cause large variations in the calculated natural frequencies, patient-specific FE models are needed for accurate estimation of bone natural frequencies.}, language = {en} } @article{HochfeldLameckerThomaleetal., author = {Hochfeld, Mascha and Lamecker, Hans and Thomale, Ulrich W. and Schulz, Matthias and Zachow, Stefan and Haberl, Hannes}, title = {Frame-based cranial reconstruction}, series = {Journal of Neurosurgery: Pediatrics}, volume = {13}, journal = {Journal of Neurosurgery: Pediatrics}, number = {3}, doi = {10.3171/2013.11.PEDS1369}, pages = {319 -- 323}, abstract = {The authors report on the first experiences with the prototype of a surgical tool for cranial remodeling. The device enables the surgeon to transfer statistical information, represented in a model, into the disfigured bone. The model is derived from a currently evolving databank of normal head shapes. Ultimately, the databank will provide a set of standard models covering the statistical range of normal head shapes, thus providing the required template for any standard remodeling procedure as well as customized models for intended overcorrection. To date, this technique has been used in the surgical treatment of 14 infants (age range 6-12 months) with craniosynostosis. In all 14 cases, the designated esthetic result, embodied by the selected model, has been achieved, without morbidity or mortality. Frame-based reconstruction provides the required tools to precisely realize the surgical reproduction of the model shape. It enables the establishment of a self-referring system, feeding back postoperative growth patterns, recorded by 3D follow-up, into the model design.}, language = {en} } @inproceedings{JoachimskyAmbellanZachow, author = {Joachimsky, Robert and Ambellan, Felix and Zachow, Stefan}, title = {Computerassistierte Auswahl und Platzierung von interpositionalen Spacern zur Behandlung fr{\"u}her Gonarthrose}, series = {Proceedings of the Jahrestagung der Deutschen Gesellschaft f{\"u}r Computer- und Roboterassistierte Chirurgie (CURAC)}, volume = {16}, booktitle = {Proceedings of the Jahrestagung der Deutschen Gesellschaft f{\"u}r Computer- und Roboterassistierte Chirurgie (CURAC)}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-65321}, pages = {106 -- 111}, abstract = {Degenerative Gelenkerkrankungen, wie die Osteoarthrose, sind ein h{\"a}ufiges Krankheitsbild unter {\"a}lteren Erwachsenen. Hierbei verringert sich u.a. der Gelenkspalt aufgrund degenerierten Knorpels oder gesch{\"a}digter Menisci. Ein in den Gelenkspalt eingebrachter interpositionaler Spacer soll die mit der Osteoarthrose einhergehende verringerte Gelenkkontaktfl{\"a}che erh{\"o}hen und so der teilweise oder vollst{\"a}ndige Gelenkersatz hinausgez{\"o}gert oder vermieden werden. In dieser Arbeit pr{\"a}sentieren wir eine Planungssoftware f{\"u}r die Auswahl und Positionierung eines interpositionalen Spacers am Patientenmodell. Auf einer MRT-basierten Bildsegmentierung aufbauend erfolgt eine geometrische Rekonstruktion der 3D-Anatomie des Kniegelenks. Anhand dieser wird der Gelenkspalt bestimmt, sowie ein Spacer ausgew{\"a}hlt und algorithmisch vorpositioniert. Die Positionierung des Spacers ist durch den Benutzer jederzeit interaktiv anpassbar. F{\"u}r jede Positionierung eines Spacers wird ein Fitness-Wert zur Knieanatomie des jeweiligen Patienten berechnet und den Nutzern R{\"u}ckmeldung hinsichtlich Passgenauigkeit gegeben. Die Software unterst{\"u}tzt somit als Entscheidungshilfe die behandelnden {\"A}rzte bei der patientenspezifischen Spacerauswahl.}, language = {de} } @article{HoffmannLemanisFalkenbergetal., author = {Hoffmann, Ren{\´e} and Lemanis, Robert and Falkenberg, Janina and Schneider, Steffen and Wesendonk, Hendrik and Zachow, Stefan}, title = {Integrating 2D and 3D shell morphology to disentangle the palaeobiology of ammonoids: A virtual approach}, series = {Palaeontology}, volume = {61}, journal = {Palaeontology}, number = {1}, doi = {10.1111/pala.12328}, pages = {89 -- 104}, abstract = {We demonstrate, based on data derived from computed tomography, that integrating 2D and 3D morphological data of ammonoid shells represent an important new approach to disentangle the palaeobiology of ammonoids. Characterization of ammonite morphology has long been constrained to 2D data and only a few studies collect ontogenetic data in 180° steps. We combine this traditional approach with 3D data collected from high-resolution nano-computed tomography. For this approach, ontogenetic morphological data of the hollow shell of a juvenile ammonite Kosmoceras (Jurassic, Callovian) is collected. 2D data is collected in 10° steps and show significant changes in shell morphology. Preserved hollow spines show multiple mineralized membranes never reported before, representing temporal changes of the ammonoid mantle tissue. 3D data show that chamber volumes do not always increase exponentially, as was generally assumed, but may represent a proxy for life events, e.g. stress phases. Furthermore, chamber volume cannot be simply derived from septal spacing in forms comparable to Kosmoceras. Vogel numbers, a 3D parameter for chamber shape, of Kosmoceras are similar to other ammonoids (Arnsbergites, Amauroceras) and modern cephalopods (Nautilus, Spirula). Two methods to virtually document the suture line ontogeny, used to document phylogenetic relationships of larger taxonomic entities, were applied for the first time and seem a promising alternative to hand drawings. The curvature of the chamber surfaces increases during ontogeny due to increasing strength of ornamentation and septal complexity. As increasing curvature may allow for faster handling of cameral liquid, it could compensate for decreasing SA/V ratios through ontogeny.}, language = {en} } @article{MoldenhauerWeiserZachow, author = {Moldenhauer, Marian and Weiser, Martin and Zachow, Stefan}, title = {Adaptive Algorithms for Optimal Hip Implant Positioning}, series = {PAMM}, volume = {17}, journal = {PAMM}, number = {1}, doi = {10.1002/pamm.201710071}, pages = {203 -- 204}, abstract = {In an aging society where the number of joint replacements rises, it is important to also increase the longevity of implants. In particular hip implants have a lifetime of at most 15 years. This derives primarily from pain due to implant migration, wear, inflammation, and dislocation, which is affected by the positioning of the implant during the surgery. Current joint replacement practice uses 2D software tools and relies on the experience of surgeons. Especially the 2D tools fail to take the patients' natural range of motion as well as stress distribution in the 3D joint induced by different daily motions into account. Optimizing the hip joint implant position for all possible parametrized motions under the constraint of a contact problem is prohibitively expensive as there are too many motions and every position change demands a recalculation of the contact problem. For the reduction of the computational effort, we use adaptive refinement on the parameter domain coupled with the interpolation method of Kriging. A coarse initial grid is to be locally refined using goal-oriented error estimation, reducing locally high variances. This approach will be combined with multi-grid optimization such that numerical errors are reduced.}, language = {en} } @inproceedings{AmbellanTackWilsonetal., author = {Ambellan, Felix and Tack, Alexander and Wilson, Dave and Anglin, Carolyn and Lamecker, Hans and Zachow, Stefan}, title = {Evaluating two methods for Geometry Reconstruction from Sparse Surgical Navigation Data}, series = {Proceedings of the Jahrestagung der Deutschen Gesellschaft f{\"u}r Computer- und Roboterassistierte Chirurgie (CURAC)}, volume = {16}, booktitle = {Proceedings of the Jahrestagung der Deutschen Gesellschaft f{\"u}r Computer- und Roboterassistierte Chirurgie (CURAC)}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-65339}, pages = {24 -- 30}, abstract = {In this study we investigate methods for fitting a Statistical Shape Model (SSM) to intraoperatively acquired point cloud data from a surgical navigation system. We validate the fitted models against the pre-operatively acquired Magnetic Resonance Imaging (MRI) data from the same patients. We consider a cohort of 10 patients who underwent navigated total knee arthroplasty. As part of the surgical protocol the patients' distal femurs were partially digitized. All patients had an MRI scan two months pre-operatively. The MRI data were manually segmented and the reconstructed bone surfaces used as ground truth against which the fit was compared. Two methods were used to fit the SSM to the data, based on (1) Iterative Closest Points (ICP) and (2) Gaussian Mixture Models (GMM). For both approaches, the difference between model fit and ground truth surface averaged less than 1.7 mm and excellent correspondence with the distal femoral morphology can be demonstrated.}, language = {en} } @article{vonTycowiczAmbellanMukhopadhyayetal., author = {von Tycowicz, Christoph and Ambellan, Felix and Mukhopadhyay, Anirban and Zachow, Stefan}, title = {An Efficient Riemannian Statistical Shape Model using Differential Coordinates}, series = {Medical Image Analysis}, volume = {43}, journal = {Medical Image Analysis}, number = {1}, doi = {10.1016/j.media.2017.09.004}, pages = {1 -- 9}, abstract = {We propose a novel Riemannian framework for statistical analysis of shapes that is able to account for the nonlinearity in shape variation. By adopting a physical perspective, we introduce a differential representation that puts the local geometric variability into focus. We model these differential coordinates as elements of a Lie group thereby endowing our shape space with a non-Euclidean structure. A key advantage of our framework is that statistics in a manifold shape space becomes numerically tractable improving performance by several orders of magnitude over state-of-the-art. We show that our Riemannian model is well suited for the identification of intra-population variability as well as inter-population differences. In particular, we demonstrate the superiority of the proposed model in experiments on specificity and generalization ability. We further derive a statistical shape descriptor that outperforms the standard Euclidean approach in terms of shape-based classification of morphological disorders.}, language = {en} } @article{ZinserZachowSailer2013, author = {Zinser, Max and Zachow, Stefan and Sailer, Hermann}, title = {Bimaxillary "rotation advancement" procedures in patients with obstructive sleep apnea: A 3-dimensional airway analysis of morphological changes}, series = {International Journal of Oral \& Maxillofacial Surgery}, volume = {42}, journal = {International Journal of Oral \& Maxillofacial Surgery}, number = {5}, doi = {10.1016/j.ijom.2012.08.002}, pages = {569 -- 578}, year = {2013}, language = {en} } @misc{DeuflhardZachow2012, author = {Deuflhard, Peter and Zachow, Stefan}, title = {Mathematische Therapie- und Operationsplanung}, publisher = {Berliner Wirtschaftsgespr{\"a}che e.V.}, address = {Berlin}, pages = {89 -- 90}, year = {2012}, language = {en} } @misc{BindernagelKainmuellerRammetal.2012, author = {Bindernagel, Matthias and Kainm{\"u}ller, Dagmar and Ramm, Heiko and Lamecker, Hans and Zachow, Stefan}, title = {Analysis of inter-individual anatomical shape variations of joint structures}, series = {Proc. Int. Society of Computer Assisted Orthopaedic Surgery (CAOS)}, journal = {Proc. Int. Society of Computer Assisted Orthopaedic Surgery (CAOS)}, number = {210}, year = {2012}, language = {en} } @inproceedings{NguyenLameckerKainmuelleretal.2012, author = {Nguyen, The Duy and Lamecker, Hans and Kainm{\"u}ller, Dagmar and Zachow, Stefan}, title = {Automatic Detection and Classification of Teeth in CT Data}, series = {Proc. Medical Image Computing and Computer Assisted Intervention (MICCAI)}, volume = {7510}, booktitle = {Proc. Medical Image Computing and Computer Assisted Intervention (MICCAI)}, editor = {Ayache, Nicholas and Delingette, Herv{\´e} and Golland, Polina and Mori, Kensaku}, pages = {609 -- 616}, year = {2012}, language = {en} } @article{NguyenKainmuellerLameckeretal.2012, author = {Nguyen, The Duy and Kainm{\"u}ller, Dagmar and Lamecker, Hans and Zachow, Stefan}, title = {Automatic bone and tooth detection for CT-based dental implant planning}, series = {Int. J. Computer Assisted Radiology and Surgery}, volume = {7, Supplement 1}, journal = {Int. J. Computer Assisted Radiology and Surgery}, number = {1}, publisher = {Springer}, pages = {293 -- 294}, year = {2012}, language = {en} } @inproceedings{LameckerZoecklerHaberletal.2005, author = {Lamecker, Hans and Z{\"o}ckler, Maja and Haberl, Hannes and Zachow, Stefan and Hege, Hans-Christian}, title = {Statistical shape modeling for craniosynostosis planning}, series = {2nd International Conference Advanced Digital Technology in Head and Neck Reconstruction 2005, Abstract Volume}, booktitle = {2nd International Conference Advanced Digital Technology in Head and Neck Reconstruction 2005, Abstract Volume}, address = {Banff, Alberta}, pages = {64}, year = {2005}, language = {en} } @article{WestermarkZachowEppley2005, author = {Westermark, Anders and Zachow, Stefan and Eppley, Barry}, title = {3D osteotomy planning in maxillofacial surgery, including 3D soft tissue prediction}, series = {Journal of Craniofacial Surgery}, volume = {16(1)}, journal = {Journal of Craniofacial Surgery}, pages = {100 -- 104}, year = {2005}, language = {en} } @article{ZachowHegeDeuflhard2005, author = {Zachow, Stefan and Hege, Hans-Christian and Deuflhard, Peter}, title = {Maxillofacial surgery planning with 3D soft tissue prediction - modeling, planning, simulation}, series = {2. Int. Conf. on Advanced Digital Technology in Head and Neck Reconstruction, Abstract 33}, journal = {2. Int. Conf. on Advanced Digital Technology in Head and Neck Reconstruction, Abstract 33}, address = {Banff, Alberta, CA}, pages = {64}, year = {2005}, language = {en} } @inproceedings{GladilinZachowDeuflhardetal.2003, author = {Gladilin, Evgeny and Zachow, Stefan and Deuflhard, Peter and Hege, Hans-Christian}, title = {Realistic prediction of individual facial emotion expressions for craniofacial surgery simulations}, series = {Proc. SPIE medical Imaging 2003}, volume = {5029}, booktitle = {Proc. SPIE medical Imaging 2003}, editor = {Galloway, Robert}, address = {San Diego, CA, USA}, doi = {10.1117/12.479584}, pages = {520 -- 527}, year = {2003}, language = {en} } @inproceedings{GladilinZachowDeuflhardetal.2003, author = {Gladilin, Evgeny and Zachow, Stefan and Deuflhard, Peter and Hege, Hans-Christian}, title = {On constitutive modeling of soft tissue for the long-term prediction of cranio-maxillofacial surgery outcome}, series = {International Congress Series, CARS2003, Computer Assisted Radiology and Surgery, Proceedings of the 17th International Congress and Exhibition}, volume = {1256}, booktitle = {International Congress Series, CARS2003, Computer Assisted Radiology and Surgery, Proceedings of the 17th International Congress and Exhibition}, doi = {10.1016/S0531-5131(03)00500-4}, pages = {343 -- 348}, year = {2003}, language = {en} } @inproceedings{ZachowGladilinSaderetal.2003, author = {Zachow, Stefan and Gladilin, Evgeny and Sader, Robert and Zeilhofer, Hans-Florian}, title = {Draw \& Cut: Intuitive 3D Osteotomy Planning on Polygonal Bone Models}, series = {Computer Assisted Radiology and Surgery (CARS)}, booktitle = {Computer Assisted Radiology and Surgery (CARS)}, address = {London, UK}, doi = {10.1016/S0531-5131(03)00272-3}, pages = {362 -- 369}, year = {2003}, language = {en} } @inproceedings{ZachowHegeDeuflhard2004, author = {Zachow, Stefan and Hege, Hans-Christian and Deuflhard, Peter}, title = {Computergest{\"u}tzte Operationsplanung in der Gesichtschirurgie}, series = {Proc. VDE Kongress 2004 - Innovationen f{\"u}r Menschen, Band 2, Fachtagungsberichte DGBMT - GMM - GMA}, booktitle = {Proc. VDE Kongress 2004 - Innovationen f{\"u}r Menschen, Band 2, Fachtagungsberichte DGBMT - GMM - GMA}, pages = {53 -- 58}, year = {2004}, language = {en} } @inproceedings{ZachowHierlErdmann2004, author = {Zachow, Stefan and Hierl, Thomas and Erdmann, Bodo}, title = {A quantitative evaluation of 3D soft tissue prediction in maxillofacial surgery planning}, series = {Proc. 3. Jahrestagung der Deutschen Gesellschaft f{\"u}r Computer- und Roboter-assistierte Chirurgie e.V.}, booktitle = {Proc. 3. Jahrestagung der Deutschen Gesellschaft f{\"u}r Computer- und Roboter-assistierte Chirurgie e.V.}, address = {M{\"u}nchen}, year = {2004}, language = {en} } @article{HierlZachowWollnyetal.2004, author = {Hierl, Thomas and Zachow, Stefan and Wollny, Gert and Berti, Guntram and Schmidt, Jens-Georg and Fingberg, Jochen}, title = {Computer-based simulation in distraction osteogenesis}, series = {Proc. of 3rd Int. Oxford Distraction Symposium of the Craniofacial Skeleton}, journal = {Proc. of 3rd Int. Oxford Distraction Symposium of the Craniofacial Skeleton}, pages = {33 -- 34}, year = {2004}, language = {en} } @article{HierlZachowWollnyetal.2004, author = {Hierl, Thomas and Zachow, Stefan and Wollny, Gert and Berti, Guntram and Schmidt, Jens-Georg and Fingberg, Jochen}, title = {Concepts of computer-based simulation in orthognathic surgery}, series = {Journal of Cranio-Maxillofacial Surgery 32 Suppl. 1}, journal = {Journal of Cranio-Maxillofacial Surgery 32 Suppl. 1}, pages = {81 -- 82}, year = {2004}, language = {en} } @article{HaberlHellZoeckleretal.2004, author = {Haberl, Hannes and Hell, Bertold and Z{\"o}ckler, Maja and Zachow, Stefan and Lamecker, Hans and Sarrafzadeh, Asita and Riecke, B. and Langsch, Wolfgang and Deuflhard, Peter and Bier, J{\"u}rgen and Brock, Mario}, title = {Technical aspects and results of surgery for craniosynostosis}, series = {Zentralblatt f{\"u}r Neurochirurgie}, volume = {65}, journal = {Zentralblatt f{\"u}r Neurochirurgie}, number = {2}, pages = {65 -- 74}, year = {2004}, language = {en} } @article{NkenkeZachowBenzetal.2004, author = {Nkenke, Emeka and Zachow, Stefan and Benz, Michaela and Maier, Tobias and Veit, Klaus and Kramer, Manuel and Benz, St. and H{\"a}usler, Gerd and Neukam, Friedrich and Lell, Michael}, title = {Fusion of computed tomography data and optical 3D images of the dentition for streak artefact correction in the simulation of orthognathic surgery}, series = {Journal of Dento-Maxillofacial Radiology}, volume = {33}, journal = {Journal of Dento-Maxillofacial Radiology}, doi = {10.1259/dmfr/27071199}, pages = {226 -- 232}, year = {2004}, language = {en} } @inproceedings{ZachowHierlErdmann2004, author = {Zachow, Stefan and Hierl, Thomas and Erdmann, Bodo}, title = {On the Predictability of tissue changes after osteotomy planning in maxillofacial surgery}, series = {Computer Assisted Radiology and Surgery (CARS)}, booktitle = {Computer Assisted Radiology and Surgery (CARS)}, address = {Chicago, USA}, doi = {10.1016/j.ics.2004.03.043}, pages = {648 -- 653}, year = {2004}, language = {en} } @inproceedings{ZachowHierlErdmann2004, author = {Zachow, Stefan and Hierl, Thomas and Erdmann, Bodo}, title = {{\"U}ber die Genauigkeit einer 3D Weichgewebepr{\"a}diktion in der MKG-Cirurgie}, series = {Workshop 'Bildverarbeitung f{\"u}r die Medizin' (BVM)}, booktitle = {Workshop 'Bildverarbeitung f{\"u}r die Medizin' (BVM)}, address = {Berlin, Germany}, pages = {75 -- 79}, year = {2004}, language = {en} } @inproceedings{GladilinZachowDeuflhardetal.2002, author = {Gladilin, Evgeny and Zachow, Stefan and Deuflhard, Peter and Hege, Hans-Christian}, title = {Adaptive Nonlinear Elastic FEM for Realistic Prediction of Soft Tissue in Craniofacial Surgery Simulations}, series = {Proc. SPIE Medical Imaging 2002}, volume = {4681}, booktitle = {Proc. SPIE Medical Imaging 2002}, editor = {K. Mun, Seong}, address = {San Diego, USA}, doi = {10.1117/12.466906}, pages = {1 -- 8}, year = {2002}, language = {en} } @inproceedings{GladilinZachowDeuflhardetal.2002, author = {Gladilin, Evgeny and Zachow, Stefan and Deuflhard, Peter and Hege, Hans-Christian}, title = {Shape-based Modeling Approach for the Estimation of Individual Facial Mimics in Craniofacial Surgery Planning}, series = {Proc. SPIE Medical Imaging 2002: Visualization, Image-Guided Procedures, and Display}, volume = {4681}, booktitle = {Proc. SPIE Medical Imaging 2002: Visualization, Image-Guided Procedures, and Display}, editor = {Mun, Seong}, address = {San Diego, USA target}, pages = {242 -- 248}, year = {2002}, language = {en} } @inproceedings{HegeSchirmacherWesterhoffetal.2002, author = {Hege, Hans-Christian and Schirmacher, Hartmut and Westerhoff, Malte and Lamecker, Hans and Prohaska, Steffen and Zachow, Stefan}, title = {From Image Data to Three-Dimensional Models - Case Studies on the Impact of 3D Patient Models}, series = {Proceedings of the Japan Korea Computer Graphics Conference 2002}, booktitle = {Proceedings of the Japan Korea Computer Graphics Conference 2002}, publisher = {Kanazawa University}, address = {Kanazawa City, Ishikawa, Japan}, year = {2002}, language = {en} }