Refine
Year of publication
Document Type
- Article (852) (remove)
Keywords
- cybersecurity (9)
- Shodan (7)
- Censys (6)
- Maltego (6)
- OSINT (6)
- Internet of Things (4)
- IoT (4)
- security (4)
- smart home (4)
- Computational complexity (3)
Institute
The problem of increasing the efficiency of existing photodetectors and creating their new types attracts much research attention. Among new photodetector types are photosensitive structures based on cascade concentrators, whose operational principle involves the absorption of optical radiation followed by its reemission at a longer wavelength and radiation concentration onto a highly efficient small-area photodetector. The absorption and re-emission spectra of each cascade layer depend on the characteristics of the material used. Сolloidal quantum dots are among the most promising materials for cascade layers due to their manufacturing technology, which provides for accurate control over the photoluminescence maximum position. It seems highly relevant to develop and to study photosensitive structures with cascade concentrators of various shapes based on CdS, CdSe/ZnS, and PbS colloidal quantum dots. Aim . To develop photosensitive structures with a wide-range sensitivity spectrum based on concentrators containing arrays of metal chalcogenide CQDs and to study their characteristics. Materials and methods . Cascade photosensitive structures were manufactured based on layers made of polymethyl methacrylate and layers of colloidal quantum dots embedded in a polystyrene matrix. Results . Three-layer concentrators were manufactured with different colloidal quantum dots in each concentrator layers. A 22 % increase in the output power was observed for a three-layer cascade structure based on different cascade layer materials compared to a similar structure using a single layer concentrator. Conclusion . The conducted studies showed an increase in the efficiency of photosensitive structures with a cascade concentrator based on colloidal quantum dots of various types (CdS, CdSe/ZnS, and PbS) in the cascade layers.
In der Natur kommen Wassertropfen in verschiedenen Größen vor. Kleine Tröpfchen von etwa 10 μm sind üblich in Nebel und Wolken, während Regentropfen bis zu 5 mm Durchmesser erreichen können. Größere Tropfen können oszillieren, während kleinere im Allgemeinen kugelförmig sind. Offensichtlich können Wassertropfen nicht beliebig groß werden. Welche Faktoren beschränken die mögliche Größe?
Manch einer kennt die Show-Darbietungen, bei denen ein Sportler mit bloßen Händen oder Füßen Mauersteine oder Holzplatten zertrümmert. Schon lange sind die physikalischen Hintergründe der Bruchmechanik und Dynamik bekannt, die diese scheinbar unmöglichen Kunststücke erlauben. Dennoch steht das Verständnis der physikalischen Bewegungsgesetze häufig im Gegensatz zu unserer Alltagserwartung.
Kennzahlen orientieren darauf, schwer fassbare, komplexe Sachverhalte übersichtlich darzustellen. Sie repräsentieren in der Regel wesentliche Hauptmerkmale von Betrachtungsgegenständen und streben durch Quantifizierung eine Objektivierung in Bewertung und Entscheidungsfindung an. Durch Kennzahlen werden Objekte miteinander vergleichbar. Nun wird seit geraumer Zeit diskutiert, auch bislang nicht originär kennzahlengesteuerte Bereiche, wie technische Entwicklung und Konstruktion in Unternehmen oder auch die hochschulische Forschung und Lehre, mit diesem vermeintlich griffigen Instrumentarium zu versehen. Dies kann sicher zu verbesserter Planung und Lenkung der Aktivitäten aber auch zu ungewünschten Wirkungen führen. Dass derartige Nebenwirkungen sogar im klassischen Anwendungsfeld von Kennzahlen auftauchen können, illustriert der vorliegende Beitrag.
Die moderne optische Spektroskopie kann geringste Substanzmengen nachweisen. Für schnelle Routinemessungen reichen konventionelle Zweistrahl-Spektralphotometer. Eine wesentlich höhere Nachweisempfindlichkeit im ppm- oder sogar ppb-Bereich ermöglichen das Atomabsorptions-Spektrometer (AAS) und das Fourier-Transformations-Infrarot-Spektrometer (FTIR). Ein AAS atomisiert die Probe vollständig und weist dann einzelne Elemente nach. Deshalb ist es zum Beispiel für die Schwermetall-Analyse geeignet. Bei der Analyse von Molekülen dominieren heute FTIR-Geräte. Ihr Herzstück ist meist ein Michelson-Interferometer. Zusammen mit schnellen Fourier-Algorithmen erlaubt es, sehr schnell breite Spektren aufzunehmen. Stationäre und mobile FTIR-Geräte können vielfältig eingesetzt werden.
Width of cluster plasmon resonances: Bulk dielectric functions and chemical interface damping
(1993)
The damping of collective electron resonances in clusters which develop into plasmon polaritons at larger sizes is investigated for free, supported, and embedded neutral metal clusters. Embedding of free 2 nm Ag clusters of 2-nm diameter into a SiO2 matrix leads to an increase of the width of the resonances by more than a factor of 3. The optical spectra are compared with the Mie theory using size-effect-modified dielectric functions of the solid state. The results corroborate the assumption that the widths of the resonances strongly depend on chemical interface effects. The results are briefly discussed with regard to limited-mean-free-path and quantum-size-effect theories and a recent approach by Persson. It is demonstrated that the widths of the spectra of supported and embedded clusters have to be interpreted with care since true intrinsic size effects of the clusters appear to be less effective than previously believed and can be obscured by the chemical interface damping.
© 1993 The American Physical Society
White matter abnormalities and brain activation in schizophrenia: a combined DTI and fMRI study
(2007)
Wettbewerb? Nein Danke!
(2015)
Wenn Licht die Biege macht
(2020)
Wenn es knallt und kracht
(2014)
An die Knallgasprobe erinnert sich wohl noch jeder aus dem Chemieunterricht. Die Zeitskala, auf der Wasserstoff und Sauerstoff reagieren hängt davon ab, ob die beiden Reaktionsgase zu Beginn getrennt oder gemischt vorliegen. Dies zeigt sich deutlich in Hochgeschwindigkeits-Aufnahmen von Experimenten, bei denen Luftballons entweder mit reinem Wasserstoff oder aber mit Knallgas gefüllt werden.
Wahlverhalten von Schülern der Sekundarstufe II im Fach Physik seit 1990 im bundesweiten Vergleich
(2000)
Von Ethik zu Recht : Der AI Act und seine Bedeutung für die Gestaltung von algorithmischen Systemen
(2021)
Von Bällen und Schlägern
(2011)
Bälle sind eines der beliebtesten Spielzeuge von Kindern und Erwachsenen. Aus physikalischer Sicht haben alle Ballspiele eines gemeinsam: mehr oder minder stark deformierbare Bälle kollidieren mit Oberflächen. Die Physik vollständig elastischer Kollisionen beinhaltet zwar nur recht elementare Physik. In der Praxis sind Kollisionen jedoch praktisch nie hundertprozentig elastisch, und außerdem laufen die Prozesse so schnell ab, dass Details nur mit Hochgeschwindigkeitsaufnahmen sichtbar werden.
Visible and invisible mirages: comparing inferior mirages in the visible and thermal infrared
(2015)
Abstract
Visible (VIS)-light and thermal infrared (IR) inferior mirages in the 8–14 μm waveband have been observed simultaneously for the takeoff and landing of various airplanes at distances of several kilometers. Similarities as well as differences between the VIS and IR mirages are discussed.
© 2014 Optical Society of America
Two stationary plane free boundary value problems for the Navier-Stokes equations are studied. The first problem models the viscous two-fluid flow down a perturbed or slightly distorted inclined plane. The second one describes the viscous two-fluid flow in a perturbed or slightly distorted channel. For sufficiently small data and under certain conditions on parameters the solvability and uniqueness results are proved for both problems. The asymptotic behaviour of the solutions is investigated. For the second problem an example of nonuniqueness is constructed. Computational results of flow problems that are very close to the above problems are presented. (© 2005 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)
Vertebral Pneumatization
(2011)
In this study, we have investigated the form of velocity and pressure functions of a fluid oscillating between two parallel glass sheets that form a circular Hele-Shaw cell. The flow has been considered to be radial, incompressible and laminar. The time-dependent Navier-Stokes equation has been solved in cylindrical coordinates using Fourier transform, and the oscillating flow velocity across the thickness of the cell has been obtained at different times. The flow velocity function in the unsteady state is related to the vertical component of the coordinates in the form of parabolic functions and also to the inverse of the radial component. The time dependence appears as a simple harmonic with a frequency equal to the oscillation frequency. The velocity of the flow is maximum at the middle of the cell along its height and gradually decreases from the middle towards the top or bottom plane and reaches zero. Pressure does not depend on the height and changes logarithmically with the radius. The dependence of pressure on time is also a simple harmonic with the external frequency, but it has a phase shift with respect to the velocity.
Es werden eine Reihe einfacher Freihandexperimente zum Thema Unterdruck vorgestellt. Viele der Beispiele sind vom grundlegenden Aufbau her bekannt, gestatten jedoch neue Varianten, Erweiterungen bzw. die Korrektur von Fehlvorstellungen. Neben der Druckmessung in Einmachgläsern und der Funktionsweise von Ausgussreinigern und Saughaken werden Druck- sowie Tragfähigkeitsmessungen an Staubsaugern diskutiert. Des weiteren wird untersucht, welche Saughöhe per Strohhalm realisiert werden kann. Es wird eine physikalisch einleuchtende, aber dennoch verblüffende Erweiterung des Versuchs mit dem umgedrehten Wasserglas präsentiert.
Die Arbeit auf Intensivstationen und in Operationssälen ist geprägt durch eine wachsende Zahl von (teilweise vernetzten) Geräten, die Vitalparameter des Patienten messen und anzeigen oder zur Therapie dienen. Für die Ärzte und Pflegekräfte wird es immer schwerer, diese alle im Auge zu behalten und angemessen zu interpretieren. Der Trend geht dazu, Unterstützungssysteme zu schaffen, die selbst klinische Expertise enthalten, und dem Anwender helfen, Entscheidungen hinsichtlich Diagnose und Therapie zu treffen. Die Schwierigkeit besteht darin, einheitliche Systeme für heterogene Anwendergruppen in einer komplexen und dynamischen Arbeitsumgebung zu gestalten. Anhand zweier Beispiele soll im Folgenden veranschaulicht werden, welche allgemeinen Richtlinien dabei Beachtung finden sollten, und auf Grundlage welcher Prozesse und Methoden gebrauchstaugliche Medizingeräte effizient entwickelt werden können. Bei den Beispielen handelt es sich um ein Anästhesiedisplay, das bei der Dosierung der Medikamente helfen soll, sowie ein Diagnosedisplay, das bei der Interpretation der gemessenen Vitalparameter für eine klinische Diagnose unterstützen soll.
Universality of correlationships among pulse parameters for different MIG Welding Power Sources
(2001)
Und sie dreht sich doch …
(2018)
Und es werde Feuer
(2017)
Und es werde Feuer
(2017)
There are two aims for the second part of this paper: verifying the theory presented in the first part through parameter variation and comparison between simulation and experiment, and to study the effect of the belt structure on the cornering properties of radial tyres. Research has been carried out with a passenger car radial tyre and two different kinds of truck or bus radial tyres using both simulation and experiment. This second part of the paper shows that belt structure plays an important role in the generation of tyre forces and moments in addition to the effects of the tread stiffness and friction coefficients. The theory and method presented in this paper opens a new robust way to predict the tyre forces and moments from the tyre design and provides a reliable model for a generation mechanism.
Tyre rolling kinematics and prediction of tyre forces and moments: part I - theory and method
(2012)
A new method to describe tyre rolling kinematics and how to calculate tyre forces and moments is presented. The Lagrange–Euler method is used to calculate the velocity and contact deformation of a tyre structure under large deformation. The calculation of structure deformation is based on the Lagrange method, while the Euler method is used to analyse the deformation and forces in the contact area. The method to predict tyre forces and moments is built using kinematic theory and nonlinear finite element analysis. A detailed analysis of the tyre tangential contact velocity and the relationships between contact forces, contact areas, lateral forces, and yaw and camber angles has been performed for specific tyres. Research on the parametric sensitivity of tyre lateral forces and self-aligning torque on tread stiffness and friction coefficients is carried out in the second part of this paper.
Twice in a blue moon
(2009)
Tropfen auf dem kalten Wein
(2012)
Viele kennen die leidvolle Erfahrung: Beim Frühstückstisch gießt man einen Schuss Milch in den Kaffee, und prompt spritzt eine kleine Fontäne aus der Tasse, und ein Tropfen landet – hier gilt Murphys Gesetz fast immer – auf dem frisch angezogenen Hemd oder mit etwas Glück nur auf der Tischdecke. Man kann dieses Phänomen unter kontrollierten Bedingungen mit Hochgeschwindigkeits-Kameras analysieren und interessante Physik hinter den Spritzern aufspüren.
Large three-dimensional metallic parts can be printed layer-by-layer using gas metal arc directed energy deposition (GMA-DED) process at a high deposition rate and with little or no material wastage. Fast responsive real-time monitoring of GMA-DED process signatures and their transient variations is required for printing of dimensionally accurate and structurally sound parts. A systematic experimental investigation is presented here on multi-layer GMA-DED with two different scanning strategies using a high strength low alloy (HSLA) filler wire. The dynamic metal transfer, melt pool temperature field and its longitudinal cross-section, and arc voltage and current are monitored synchronously. The transient arc heat input and the melt pool solidification cooling rate are estimated from the monitored signals. The layer-wise variations of the melt pool dimension, surface temperature profile, thermal cycles, and solidification cooling rate are examined for different scanning strategies. It is comprehended that the part defects can be minimized, and the mass production of zero-defect parts can be achieved in GMA-DED process with synchronized monitoring and assessment of the real-time process signatures.
Topodiagnostic value of blink reflex R1 changes: a digital postprocessing MRI correlation study
(2001)
Among load cases concerning vehicle suspension strength and durability, the misuse case is very special because of large obstacles. In this paper, an extension of the flexible belt model RMOD-K 7 concerning misuse situations is discussed. In normal rolling conditions, contact occurs between tire and road surface. To handle misuse deformations, the contact between the inner surface of the tire and the rim has to be dealt with. Results of the validation process are shown, leading to normal forces up to 70 [kN]. The model can be used together with mbs full vehicle models. One example is the determination of the critical test velocity, which generates the maximum of suspension stresses and can be found using RMOD-K 7.