Refine
Year of publication
Document Type
- Article (297) (remove)
Is part of the Bibliography
- yes (297) (remove)
Keywords
- 3D-Druck (1)
- 4,4-(hexafluoroisopropylidene) dianiline (1)
- 5,5-methylene bis(2-aminophenol) (1)
- AC resistance (1)
- Additive Fertigung (1)
- Aspen Plus (1)
- Automobiles (1)
- Biomass gasification (1)
- Central carbon metabolism (1)
- Chemical compounds (1)
Institute
- Fachbereich Technik (297) (remove)
Live music is often linked to elaborate light shows, particularly at large outdoor music festivals. However, artificial light at night is one form of environmental pollution, light pollution, and because outdoor festivals emit a substantial amount of artificial light into the environment, they are a potential source of light pollution. So far, no studies that quantified the impact of such festivals on urban light pollution and skyglow exist. Here, the light pollution produced by a major rock festival (Lollapalooza Berlin 2016 with 70,000 visitors per day in an urban park) was investigated with ground-based radiometry and night-time light data. A small night-sky radiometer installed near the main stages and a calibrated digital camera from a nearby observation spot inside of the park were used to quantify changes in night sky brightness and direct light emissions within the park. The impact of the music festival on the urban skyglow was indeed measurable. Zenith luminance increased locally by up to a factor of 8 and illuminance increased by about 50% at the observation spot within the park. The radiance detected by night-time satellite was also increased during the festival. This is the first time, that light pollution from such a major rock music event was quantified.
Light pollution has increased globally, with 80% of the total population now living under light-polluted skies. In this Review, we elucidate the scope and importance of light pollution and discuss techniques to monitor it. In urban areas, light emissions from sources such as street lights lead to a zenith radiance 40 times larger than that of an unpolluted night sky. Non-urban areas account for over 50% of the total night-time light observed by satellites, with contributions from sources such as transportation networks and resource extraction. Artificial light can disturb the migratory and reproductive behaviours of animals even at the low illuminances from diffuse skyglow. Additionally, lighting (indoor and outdoor) accounts for 20% of global electricity consumption and 6% of CO2 emissions, leading to indirect environmental impacts and a financial cost. However, existing monitoring techniques can only perform a limited number of measurements throughout the night and lack spectral and spatial resolution. Therefore, satellites with improved spectral and spatial resolution are needed to enable time series analysis of light pollution trends throughout the night.
Artificial light at night originating from bridge illumination can cause polarised light pollution when it is reflected at water body surfaces. This alters the optical conditions of a river at night and potentially interferes with natural polarisation signals from, for example, moonlight. Therefore, this type of light pollution could detrimentally change the behaviour of organisms sensitive to polarised light, a navigational cue and signal known to be used e.g. by flying water-seeking insects to detect suitable aquatic habitats to reproduce and lay eggs. So far, polarised light pollution from artificial light at night is understudied. Here, we quantify polarised light pollution at the water’s surface near seven illuminated bridges crossing the river Spree in Berlin. Our measurements show for the first time, that nocturnal bridge illumination induces polarised light pollution towards potential flying paths of polarotactic aquatic insects. On average, around 9% of the water surfaces at the investigated bridges were highly polluted by polarised light, with values ranging between 3 and 12 % for each bridge. Thus, polarised light pollution from artificial light at night is an emergent pollutant for aquatic systems. Future work on this topic should include more comprehensive measurements, further ecological studies on its impacts and the development of sustainable lighting solutions that can contribute to the protection of riverine nightscapes.
Coarsening of Quasi Two-Dimensional Emulsions Formed by Islands in Free-Standing Smectic Films
(2024)
We study the coarsening behavior of assemblies of islands on smectic A freely suspended films in ISS microgravity experiments. The islands can be regarded as liquid inclusions in a two-dimensional fluid in analogy to liquid droplets of the discontinuous phase of an emulsion. The coarsening is effectuated by two processes, predominantly by island coalescence, but to some extend also by Ostwald ripening, whereby large islands grow at the expense of surrounding smaller ones. A peculiarity of this system is that the continuous and the discontinuous phases consist of the same material. We determine the dynamics, analyze the self-similar aging of the island size distribution and discuss characteristic exponents of the mean island growth.
Smectic islands on a thin freely suspended smectic film form a quasi two-dimensional emulsion, without a liquid subphase. We describe the coarsening dynamics that involves island coalescence and Ostwald ripening.
The energy transfer between bouncing particles and rigid boundaries during impacts is crucially influenced not only by restitution coefficients of the material but also by particle shapes. This is particularly important when such particles are mechanically agitated with vibrating plates. Inertial measurement units are able to measure all acceleration and rotational velocity components of an object and store these data for subsequent analysis. We employ them to measure the dynamics of cubes and icosahedra on vibrating plates to study the efficiency of energy transfer into the individual degrees of freedom (DOFs) of the excited object. The rotational DOFs turn out to be much less excited than the vertical translational motion. Most remarkably, there is only little difference between the two Platonic solids in both the absolute energies and the energy partition ratios.
The problem of increasing the efficiency of existing photodetectors and creating their new types attracts much research attention. Among new photodetector types are photosensitive structures based on cascade concentrators, whose operational principle involves the absorption of optical radiation followed by its reemission at a longer wavelength and radiation concentration onto a highly efficient small-area photodetector. The absorption and re-emission spectra of each cascade layer depend on the characteristics of the material used. Сolloidal quantum dots are among the most promising materials for cascade layers due to their manufacturing technology, which provides for accurate control over the photoluminescence maximum position. It seems highly relevant to develop and to study photosensitive structures with cascade concentrators of various shapes based on CdS, CdSe/ZnS, and PbS colloidal quantum dots. Aim . To develop photosensitive structures with a wide-range sensitivity spectrum based on concentrators containing arrays of metal chalcogenide CQDs and to study their characteristics. Materials and methods . Cascade photosensitive structures were manufactured based on layers made of polymethyl methacrylate and layers of colloidal quantum dots embedded in a polystyrene matrix. Results . Three-layer concentrators were manufactured with different colloidal quantum dots in each concentrator layers. A 22 % increase in the output power was observed for a three-layer cascade structure based on different cascade layer materials compared to a similar structure using a single layer concentrator. Conclusion . The conducted studies showed an increase in the efficiency of photosensitive structures with a cascade concentrator based on colloidal quantum dots of various types (CdS, CdSe/ZnS, and PbS) in the cascade layers.
Illuminated bridges have become important assets to navigable aquatic systems. However, if artificial light at night (ALAN) from illuminated bridges reaches aquatic habitats, such as rivers, it can threaten the river's natural heterogeneity and alter the behavioural responses of migratory fish. Here, via a pilot study, we quantified levels of ALAN at illuminated bridges that cross a river and, propose a conceptual model to estimate its potential implications on two migrating fish species with contrasting life histories. Night-time light measurements on the river Spree in Berlin were performed continuously along a transect and in detail at seven illuminated bridges. Photometric data of the pilot study showed rapidly increased and decreased light levels at several illuminated bridges from which we derived several model illumination scenarios. These illumination scenarios and their potential effect on migrating Atlantic salmon smolts (Salmo salar) and European silver eel (Anguilla anguilla) are presented as a conceptual model, considering illuminated bridges as behavioural barriers to fish migration. ALAN's adverse effects on freshwater habitats must be better researched, understood, managed, and properly communicated to develop future sustainable lighting practices and policies that preserve riverscapes and their biodiversity.
So weit das Auge trägt
(2023)
Sichtweiten in der Atmosphäre reichen von wenigen Metern im Nebel bis zu einigen hundert Kilometern bei extrem guten Fernsichtbedingungen. Die zugrundeliegende Physik geht vom Wahrnehmungskontrast aus. Dieser ändert sich mit der Entfernung entlang der Sichtlinie zwischen Objekt und Auge aufgrund von Lichtstreuung und Absorption an den Bestandteilen der Atmosphäre. Dazu kommt bei der Fernsicht die Refraktion, die es erlaubt, auch über den durch die Kugelform der Erde geometrisch bedingten Horizont hinaus zu sehen.
This study examines the impact of Artificial Light at Night (ALAN) on two coral species, Acropora eurystoma and Pocillopora damicornis, in the Gulf of Aqaba/Eilat Red Sea, assessing their natural isotopic responses to highlight changes in energy and nutrient sourcing due to sensory light pollution. Our findings indicate significant disturbances in photosynthetic processes in Acropora eurystoma, as evidenced by shifts in δ13C values under ALAN, pointing to alterations in carbon distribution or utilization. In Pocillopora damicornis, similar trends were observed, with changes in δ13C and δ15N values suggesting a disruption in its nitrogen cycle and feeding strategies.
The study also uncovers species-specific variations in heterotrophic feeding, a crucial factor in coral resilience under environmental stress, contributing to the corals' fixed carbon budget. Light measurements across the Gulf demonstrated a gradient of light pollution which possess the potential of affecting marine biology in the region. ALAN was found to disrupt natural diurnal tentacle behaviors in both coral species, crucial for prey capture and nutrient acquisition, thereby impacting their isotopic composition and health.
Echoing previous research, our study underscores the need to consider each species' ecological and physiological contexts when assessing the impacts of anthropogenic changes. The findings offer important insights into the complexities of marine ecosystems under environmental stress and highlight the urgency of developing effective mitigation strategies.
In this study, we have investigated the form of velocity and pressure functions of a fluid oscillating between two parallel glass sheets that form a circular Hele-Shaw cell. The flow has been considered to be radial, incompressible and laminar. The time-dependent Navier-Stokes equation has been solved in cylindrical coordinates using Fourier transform, and the oscillating flow velocity across the thickness of the cell has been obtained at different times. The flow velocity function in the unsteady state is related to the vertical component of the coordinates in the form of parabolic functions and also to the inverse of the radial component. The time dependence appears as a simple harmonic with a frequency equal to the oscillation frequency. The velocity of the flow is maximum at the middle of the cell along its height and gradually decreases from the middle towards the top or bottom plane and reaches zero. Pressure does not depend on the height and changes logarithmically with the radius. The dependence of pressure on time is also a simple harmonic with the external frequency, but it has a phase shift with respect to the velocity.
We investigate micrometer-sized flat droplets consisting of an isotropic core surrounded by a nematic rim in freely suspended smectic A liquid-crystal films. In contrast to purely isotropic droplets which are characterized by a sharp edge and no long-range interactions, the nematic fringe introduces a continuous film thickness change resulting in long-range mutual attraction of droplets. The coalescence scenario is divided in two phases. The first one consists in the fusion of the nematic regions. The second phase involves the dissolution of a thin nematic film between the two isotropic cores. The latter has many similarities with the rupture of thin liquid films between droplets coalescing in an immiscible viscous liquid.
Coalescence of biphasic droplets in free-standing smectic films is controlled in part by the rupture of a thin nematic membrane separating the isotropic droplet cores.
Sensing is nowadays an accepted application of phononic crystals with chemical and biosensors for liquid analytes being the perhaps most promising ones. A liquid-filled defect is introduced that turns into a resonant cavity. Similar to the well-known resonant sensors sensitivity can be increased with higher operating frequencies. We introduce a Sandwiched Phononic Crystal (SPC), which applies a resonant cavity located between two stacked layers on top of a SAW device. Key challenges are coupling of surface acoustic wave into the liquid cavities and avoiding scattering of the guided waves into the bulk of the sensor chip.
Water can exhibit many different colors due to a variety of physical properties. Here, we focus on some observable colors within very pure freshwater. We only treat the absorption of light due to electronic and ro-vibrational excitations and scattering due to refractive index fluctuations of the water and the respective consequences for the appearance of colors.
Freezing of lakes is described using a simplified one-dimensional model, which gives ice thickness, ice growth rates, and ice surface temperature as a function of time. Model data for a specific lake with known meteorological conditions are compared to estimated ice thickness using a simple optical method. Finally, more advanced potential students projects are briefly discussed and results of a numerical solution are compared to the simplified model.
The public sector faces several challenges, such as a number of external and internal demands for change, citizens' dissatisfaction and frustration with public sector organizations, that need to be addressed. An alternative to the traditional top-down development of public services is co-creation of public services. Co-creation promotes collaboration between stakeholders with the aim to create better public services and achieve public values. At the same time, data analytics has been fuelled by the availability of immense amounts of textual data. Whilst both co-creation and TA have been used in the private sector, we study existing works on the application of Text Analytics (TA) techniques on text data to support public service co-creation. We systematically review 75 of the 979 papers that focus directly or indirectly on the application of TA in the context of public service development. In our review, we analyze the TA techniques, the public service they support, public value outcomes, and the co-creation phase they are used in. Our findings indicate that the TA implementation for co-creation is still in its early stages and thus still limited. Our research framework promotes the concept and stimulates the strengthening of the role of Text Analytics techniques to support public sector organisations and their use of co-creation process. From policy-makers' and public administration managers' standpoints, our findings and the proposed research framework can be used as a guideline in developing a strategy for the designing co-created and user-centred public services.
Disclinations or disclination clusters in smectic C freely suspended films with topological charges larger than one are unstable. They disintegrate, preferably in a spatially symmetric fashion, into single defects with individual charges of +1, which is the smallest positive topological charge allowed in polar vector fields. While the opposite process of defect annihilation is well-defined by the initial defect positions, disintegration starts from a singular state and the following scenario including the emerging regular defect patterns must be selected by specific mechanisms. We analyze experimental data and compare them with a simple model where the defect clusters adiabatically pass quasi-equilibrium solutions in one-constant approximation. It is found that the defects arrange in geometrical patterns that correspond very closely to superimposed singular defect solutions, without additional director distortions. The patterns expand by affine transformations where all distances between individual defects scale with the same time-dependent scaling factor proportional to the square-root of time.
The Patellostabilometer: A New Device for Quantification of Mediolateral Patella Displacement
(2023)
Mediolateral patella displacement is of interest for diagnostics and clinically relevant
research questions. Apart from manual testing, no standardized method is currently available. Proper
quantification of patella mobility is necessary to better understand pathologies at the patellofemoral
joint. Patella mobility was assessed in 25 healthy individuals using a Patellostabilometer, a new
prototype instrument for quantification of the mediolateral patella displacement. The participants
underwent measurements of the mediolateral displacement three times using the Patellostabilome-
ter. A maximal force of 10 N was applied for patella movement. Additionally, leg length and
circumference of the knee, upper- and lower-leg were measured. Lateral patella displacement of
18.27 ± 3.76 mm (range 15.85–20.64 mm, interquartile range (IQR) of 4.79) was measured. The medial
patella displacement showed 24.47 ± 6.59 mm (range 19.29–29.76 mm, IQR of 10.47). The test–retest
measurement error was 2.32 ± 1.76 mm (IQR of 2.38 mm), with five outliers. There was greater
test–retest variability between the measurements of the medial displacement compared to the lateral
one. The test–retest variability reached 7% of the patella displacement. Other parameters provided no
significant correlations. Based on the natural patellofemoral mobility, a precise and clinically relevant
quantification of patella mobility is allowed.
An approach for analyzing business process execution complexity based on textual data and event log
(2023)
With the advent of digital transformation, organizations increasingly rely on various information systems to support their business processes (BPs). Recorded data, including textual data and event log, expand exponentially, complicating decision-making and posing new challenges for BP complexity analysis in Business Process Management (BPM). Herein, Process Mining (PM) serves to derive insights based on historic BP execution data, called event log. However, in PM, textual data is often neglected or limited to BP descriptions. Therefore, in this study, we propose a novel approach for analyzing BP execution complexity by combining textual data serving as an input at the BP start and event log. The approach is aimed at studying the connection between complexities obtained from these two data types. For textual data-based complexity, the approach employs a set of linguistic features. In our previous work, we have explored the design of linguistic features favorable for BP execution complexity prediction. Accordingly, we adapt and incorporate them into the proposed approach. Using these features, various machine learning techniques are applied to predict textual data-based complexity. Moreover, in this prediction, we show the adequacy of our linguistic features, which outperformed the linguistic features of a widely-used text analysis technique. To calculate event log-based complexity, the event log and relevant complexity metrics are used. Afterward, a correlation analysis of two complexities and an analysis of the significant differences in correlations are performed. The results serve to derive recommendations and insights for BP improvement. We apply the approach in the IT ticket handling process of the IT department of an academic institution. Our findings show that the suggested approach enables a comprehensive identification of BP redesign and improvement opportunities.
Large three-dimensional metallic parts can be printed layer-by-layer using gas metal arc directed energy deposition (GMA-DED) process at a high deposition rate and with little or no material wastage. Fast responsive real-time monitoring of GMA-DED process signatures and their transient variations is required for printing of dimensionally accurate and structurally sound parts. A systematic experimental investigation is presented here on multi-layer GMA-DED with two different scanning strategies using a high strength low alloy (HSLA) filler wire. The dynamic metal transfer, melt pool temperature field and its longitudinal cross-section, and arc voltage and current are monitored synchronously. The transient arc heat input and the melt pool solidification cooling rate are estimated from the monitored signals. The layer-wise variations of the melt pool dimension, surface temperature profile, thermal cycles, and solidification cooling rate are examined for different scanning strategies. It is comprehended that the part defects can be minimized, and the mass production of zero-defect parts can be achieved in GMA-DED process with synchronized monitoring and assessment of the real-time process signatures.
When a droplet is brought in contact with an undercooled surface, it wets the substrate and solidifies at the same time. The interplay between the phase transition effects and the contact-line motion, leading to its arrest, remains poorly understood. Here we reveal the early solidification patterns and dynamics of spreading hexadecane droplets. Total internal reflection imaging is employed to temporally and spatially resolve the early solidification behavior. With this, we determine the conditions leading to the contact-line arrest. We quantify the overall nucleation behavior, i.e., the nucleation rate and the crystal growth speed and show its sensitivity to the applied undercooling of the substrate. We also show that for strong enough undercooling it is the rapid growth of the crystals which determines the eventual arrest of the spreading contact line. By combining the Johnson-Mehl-Avrami-Kolmogorov nucleation theory and scaling relations for the spreading, we calculate the temporal evolution of the solid area fraction, which is in good agreement with our observations.
Der Erwartungswert einer Zufallsgröße kann generell am Graphen ihrer Verteilungsfunktion durch eine naheliegende Gleichheit zweier Flächeninhalte festgelegt werden. Äquivalent dazu lässt er sich mit zwei uneigentlichen Riemann-Integralen darstellen. Davon ausgehend werden die Tschebyschow-Ungleichung und ihre Modifikation mit strikten Ungleichheitszeichen hergeleitet.
Fast protein and metabolite liquid chromatography (FPLMC) was introduced years ago to enable the easy separation of high-molecular compounds such as proteins from small molecules and the identification of the low-molecular substances. In this paper, the method is applied for the rapid evaluation of freshness and monitoring the aging of animal meat and fish. A novel chromatographic sensor was developed with a deep UV LED-based photometric detection unit (255–265 nm), an original flow cuvette and registration scheme; the processing of a chromatogram with the sensor takes approximately 15 min. Strict isochronism between the elution of ATP metabolites, mainly hypoxanthine (Hx) and inosine monophosphate (IMP), and the time of maturation of meat or fish, was discovered. A new freshness index H* = [Hx]/[IMP] was introduced, which is proportional to the instrumental delay time in the FPMLC chromatograms: the H* index < 0.5 indicates the presence of inosine monophosphate (IMP) and the high quality of the meat or fish. Reasonably strong correlations were revealed between data obtained by FPMLC and total volatile basic nitrogen TVB-N (for fish) or volatile fatty acids VFA (for meat) content. Moreover, putative nucleotide salvage and an increase in the concentration of IMP were observed in fish after heat treatment using the FPMLC sensor and NMR technique.
Single dielectric microspheres can manipulate light focusing and collection to enhance optical interaction with surfaces. To demonstrate this principle, we experimentally investigate the enhancement of the Raman signal collected by a single dielectric microsphere, with a radius much larger than the exciting laser spot size, residing on the sample surface. The absolute microsphere-assisted Raman signal from a single graphene layer measured in air is more than a factor of two higher than that obtained with a high numerical aperture objective. Results from Mie’s theory are used to benchmark numerical simulations and an analytical model to describe the isolated microsphere focusing properties. The analytical model and the numerical simulations justify the Raman signal enhancement measured in the microsphere-assisted Raman spectroscopy experiments.
Biomass gasification is recognized as a viable avenue to accelerate the sustainable production of hydrogen. In this work, a numerical simulation model of air gasification of rice husks is developed using the Aspen Plus to investigate the feasibility of producing hydrogen-rich syngas. The model is experimentally validated with rice husk gasification results and other published studies. The influence of temperature and equivalence ratio on the syngas composition, H2 yield, LHVSyngas, H2/CO ratio, CGE, and PCG was studied. Furthermore, the synchronized effects of temperature and ER are studied using RSM to determine the operational point of maximizing H2 yield and PCG. The RSM analysis results show optimum performance at temperatures between 820 °C and 1090 °C and ER in the range of 0.06–0.10. The findings show that optimal operating conditions of the gasification system can be achieved at a more refined precision through simulations coupled with advanced optimization techniques.
Glass-ceramic composites consisting of potassium-iron-silicate glass and barium titanate mixed in various proportions were successfully synthesized by low-temperature sintering. The crystal structure of the obtained composite samples, the porosity and the microhardness were studied by the X-ray diffraction, the electron microscopy, the weight method, and the Vickers method. Electrical characteristics (dielectric permittivity, tunability and losses) of as-prepared and annealed in oxygen medium samples were investigated at microwaves. According to structural analysis, the synthesized samples are a mixture of KFeSi glass, ferroelectric BaTiO3, and dielectric barium polytitanates; the ratio of the latter determines the electrical properties of the composites. Depending on the content of barium titanate, the studied composite samples show a permittivity from 50 to 270 with a dielectric loss level of 0,1–0,02 in frequency range from 3 to 10 GHz. Annealing of composite samples in an oxygen-containing environment leads to an increase in their dielectric permittivity and tunability by 10–25% and a twofold decrease in dielectric loss.
Making and interpretation of drawings and schematics is an important skill to be developed in engineering education. The question type STACK in the Moodle learning management system combined with the interactive graphics library JSXGraph has a great potential for implementation of e-learning resources addressing these skills in formative and summative settings. The authoring process of such materials is complex due to multiple markup and programming languages like HTML, LaTeX, Maxima and JavaScript (JS) being involved. The Meclib concept mitigates this complexity and allows for efficient bulk production of material with consistent appearance and user experience. The core of Meclib is a set of pre-defined JSXGraph-based objects with an interface to Maxima, such that no problem specific JS code is required at all. The present paper outlines the basic ideas of the implementation and demonstrates the approach for some typical examples of different complexity. The focus is on applications in engineering mechanics, starting from static illustrations up to an editor for free body diagrams, with rich adaptive formative feedback.
In this study we have examined the potential of excess wind use in Germany. Excess wind constitutes roughly 40% of unused capacities of installed wind power in Germany. Using LP modelling and representative annual load profiles on an hourly resolution, we investigate the impact of the price level for wind peak power supply of residential quarters with heat, cold and electricity in Germany in combination with different power ratios of wind supply and demand. As we show, an application of wind peak tariff is technically and economically feasible and allows using green leftover energy without going in competition with e.g., green fuels or green H2 production.
This study analyzes approaches to decarbonize the energy supply of the secondary steel processing industry. Therefore, real data from a secondary steel production company is used in combination with state-of-the art low carbon energy supply technologies. Also, the use of waste heat from a pusher furnace for process integration is considered. The developed temporal process model allows holistic optimizing and expanding the steel making process system regarding techno-economic criteria. As we show, implementing the annual heat demand of a municipality shows that a nearly 100 % self-sufficient heat supply is possible.
Auf dem Weg zum Replikator
(2022)
Fata Morgana im Wasserbecken
(2020)
Gefrierende Gewässer
(2021)
Wenn Licht die Biege macht
(2020)
Three-dimensional vibration of a ring with a noncircular cross-section on an elastic foundation
(2018)
Asymmetrische Polarlichter
(2009)