@article{LucklumZubtsovOseevetal.2016, author = {Lucklum, Ralf and Zubtsov, Mikhail and Oseev, Aleksandr and Schmidt, Marc-Peter and Hirsch, S{\"o}ren}, title = {SAW Based Sandwich Phononic Crystal Sensor}, series = {Procedia Engineering}, journal = {Procedia Engineering}, number = {168}, publisher = {Elsevier}, issn = {18777058}, doi = {10.1016/j.proeng.2016.11.251}, pages = {700 -- 703}, year = {2016}, abstract = {Sensing is nowadays an accepted application of phononic crystals with chemical and biosensors for liquid analytes being the perhaps most promising ones. A liquid-filled defect is introduced that turns into a resonant cavity. Similar to the well-known resonant sensors sensitivity can be increased with higher operating frequencies. We introduce a Sandwiched Phononic Crystal (SPC), which applies a resonant cavity located between two stacked layers on top of a SAW device. Key challenges are coupling of surface acoustic wave into the liquid cavities and avoiding scattering of the guided waves into the bulk of the sensor chip.}, language = {en} } @article{SchmidtOseevLucklumetal.2016, author = {Schmidt, Marc-Peter and Oseev, Aleksandr and Lucklum, Ralf and Zubtsov, Mikhail and Hirsch, S{\"o}ren}, title = {SAW based phononic crystal sensor, technological challenges and solutions}, series = {Microsystem Technologies}, journal = {Microsystem Technologies}, publisher = {Springer Link}, issn = {0946-7076, 1432-1858}, doi = {10.1007/s00542-015-2781-3}, pages = {1593 -- 1599}, year = {2016}, language = {en} } @article{AmanMajcherekSchmidtetal.2016, author = {Aman, A. and Majcherek, Soeren and Schmidt, M. P. and Orseev, A. and Engel, C. and Hirsch, S{\"o}ren}, title = {Behavior of Current Flow on Lead Zirconate Titanate Surfaces during Mechanical Impact}, series = {Research \& Reviews: Journal of Material Sciences}, journal = {Research \& Reviews: Journal of Material Sciences}, number = {Ausgabe: 1/ Band: 4}, publisher = {Research and Reviews}, issn = {23216212}, doi = {10.4172/2321-6212.1000137}, year = {2016}, language = {en} } @article{LiefoldWagnerDuecketal.2016, author = {Liefold, Marius and Wagner, Dennis and D{\"u}ck, Michael Sebastian and G{\"o}cmez, E. and Kinberger, B. and Gr{\"u}ndel, P. and Gadegast, E. and Beck, Eberhard and Schrader, Thomas}, title = {Konzeption und Entwicklung von mobilen Hard- und Softwarekomponenten zur Verbesserung der Schwangerenvorsorge in L{\"a}ndern der 3. Welt}, series = {Geburtshilfe und Frauenheilkunde}, volume = {76}, journal = {Geburtshilfe und Frauenheilkunde}, doi = {10.1055/s-0036-1593060}, pages = {P197}, year = {2016}, language = {de} } @article{HaroskeOemigSchrader2016, author = {Haroske, Gunter and Oemig, Frank and Schrader, Thomas}, title = {Der Pathologiebericht - national gestartet und international angekommen}, series = {HL7-Mitteilungen}, journal = {HL7-Mitteilungen}, number = {Nr. 38/2016}, pages = {7 -- 11}, year = {2016}, language = {de} } @article{Syring2016, author = {Syring, Nadine}, title = {The Influence of University Activities on Multicultural Teams}, series = {Business Perspectives and Research}, volume = {4}, journal = {Business Perspectives and Research}, number = {2}, doi = {10.1177/2278533716642641}, pages = {127 -- 135}, year = {2016}, language = {en} } @article{GoeckeShomeDasetal.2016, author = {Goecke, Sven-Frithjof and Shome, M. and Das, A. and De, A.}, title = {Numerical modelling of gas metal arc joining of aluminium alloy and galvanised steels in lap joint configuration}, series = {Science and Technology of Welding \& Joining}, volume = {21}, journal = {Science and Technology of Welding \& Joining}, number = {4}, doi = {10.1080/13621718.2015.1104206}, pages = {303 -- 309}, year = {2016}, language = {en} } @article{GoeckeKueglerMoelleretal.2016, author = {Goecke, Sven-Frithjof and K{\"u}gler, Helga and M{\"o}ller, Felix and Vollertsen, Frank}, title = {Dauerfestigkeit hybridgeschweißter {\"U}berlappn{\"a}hte des Stahls 22MnB5}, series = {Materials Testing}, volume = {58}, journal = {Materials Testing}, number = {6}, doi = {10.3139/120.110880}, pages = {569 -- 574}, year = {2016}, language = {de} } @article{BurgerMenzel2016, author = {Burger-Menzel, Bettina}, title = {Environmental Politics and the Migration of Ideas and Practices - A Critical View on What Makes Humans Learn and Behaviourally Change}, series = {A Multi-disciplinary Mosaic: Reflections on Global Cooperation and Migration}, journal = {A Multi-disciplinary Mosaic: Reflections on Global Cooperation and Migration}, publisher = {K{\"a}ste Hamburger Kolleg/ Centre for Global Cooperation Research}, address = {Duisburg}, doi = {10.14282/2198-0403-GD-13}, pages = {33 -- 36}, year = {2016}, language = {en} } @article{HirschSchmidtOseevetal.2016, author = {Hirsch, S{\"o}ren and Schmidt, Marc-Peter and Oseev, Aleksandr and Engel, Christian and Brose, Andreas and Schmidt, Bertram}, title = {Flexible free-standing SU-8 microfluidic impedancespectroscopy sensor for 3-D molded interconnectdevices application}, series = {Journal of Sensors and Sensor Systems}, volume = {5}, journal = {Journal of Sensors and Sensor Systems}, number = {1}, doi = {10.5194/jsss-5-55-2016}, pages = {55 -- 61}, year = {2016}, language = {en} } @article{HirschKoshuroFominaetal.2016, author = {Hirsch, S{\"o}ren and Koshuro, V. and Fomina, M. and Rodionov, I. and Brzhozovskii, B. and Martynov, V. and Zakharevich, A. and Aman, A. and Oseev, A. and Majcherek, S.}, title = {Structure of metal-oxide Ti-Ta-(Ti,Ta)xOy coatings during spark alloying and induction-thermal oxidation}, series = {Journal of Physics: Conference Series}, volume = {741}, journal = {Journal of Physics: Conference Series}, number = {1}, doi = {10.1088/1742-6596/741/1/012197}, year = {2016}, language = {en} } @article{HirschFominaKoshuroetal.2016, author = {Hirsch, S{\"o}ren and Fomina, M. A. and Koshuro, V. A. and Rodionov, I. V. and Voiko, A. V. and Zakharevich, A. M. and Aman, A. and Oseev, A. and Majcherek, S.}, title = {Micro- and nanostructure of a titanium surface electric-spark-doped with tantalum and modified by high-frequency currents}, series = {Technical Physics Letters}, volume = {42}, journal = {Technical Physics Letters}, number = {9}, doi = {10.1134/s1063785016090170}, pages = {932 -- 935}, year = {2016}, language = {en} } @article{MakwanaShomeGoeckeetal.2016, author = {Makwana, Pinaac and Shome, Mahadev and Goecke, Sven-Frithjof and De, Amitava}, title = {Gas metal arc brazing of galvannealed steel sheets}, series = {Science and Technology of Welding \& Joining}, volume = {21}, journal = {Science and Technology of Welding \& Joining}, number = {7}, doi = {10.1080/13621718.2016.1145420}, pages = {1 -- 7}, year = {2016}, language = {en} } @article{MeisterJetschni2016, author = {Meister, Vera G. and Jetschni, Jonas}, title = {Prototypical Implementation of a Decentralized Semantic-Web-based Information System for Specific Study Programs}, series = {Studia ekonomiczne : zeszyty naukowe Uniwersytetu Ekonomicznego w Katowicach}, journal = {Studia ekonomiczne : zeszyty naukowe Uniwersytetu Ekonomicznego w Katowicach}, number = {296.2016}, publisher = {Wydawn. Univ. Ekonomicznego w Katowicach}, address = {Katowice}, issn = {2083-8611}, year = {2016}, language = {en} } @article{KellerSchulz2016, author = {Keller, Ivo and Schulz, Bernd}, title = {Digitale Sicherheit - die Bahnen m{\"u}ssen gewappnet sein}, series = {Privatbahn : Magazin}, journal = {Privatbahn : Magazin}, number = {5/2016}, pages = {26}, year = {2016}, language = {de} } @article{KettelerKuhnMeisteretal.2016, author = {Ketteler, Norbert and Kuhn, Elvira and Meister, Vera G. and R{\"o}ckle, Haio}, title = {Marketing f{\"u}r ein Wirtschaftsinformatik-Studium mit Hilfe des "WI-Koffers"}, series = {Anwendungen und Konzepte der Wirtschaftsinformatik}, journal = {Anwendungen und Konzepte der Wirtschaftsinformatik}, number = {4}, issn = {2296-4592}, pages = {1 -- 8}, year = {2016}, language = {de} } @article{Meister2016, author = {Meister, Vera G.}, title = {Konzept f{\"u}r einen Semantic-Web-basierten Studienf{\"u}hrer f{\"u}r Wirtschaftsinformatik an Fachhochschulen im deutschsprachigen Raum}, series = {Anwendungen und Konzepte der Wirtschaftsinformatik}, journal = {Anwendungen und Konzepte der Wirtschaftsinformatik}, number = {4}, issn = {2296-4592}, pages = {44 -- 49}, year = {2016}, language = {de} } @article{Hoeding2016, author = {H{\"o}ding, Michael}, title = {Webauftritte als One-Pager: Grundlagen, Nutzen und Grenzen}, series = {Funkamateur}, journal = {Funkamateur}, number = {9/16}, issn = {0016-2833}, pages = {824 -- 825}, year = {2016}, language = {de} } @article{KellSchulzMrkor2016, author = {Kell, Gerald and Schulz, Daniel and Mrkor, Kai-Uwe}, title = {Application of IHP's SiGe-Technology for very fast data processing}, series = {Activity Report 2016 / Europactice}, journal = {Activity Report 2016 / Europactice}, pages = {41 -- 42}, year = {2016}, language = {en} } @article{BoerschFuesselGreschetal.2018, author = {Boersch, Ingo and F{\"u}ssel, Uwe and Gresch, Christoph and Großmann, Christoph and Hoffmann, Benjamin}, title = {Data mining in resistance spot welding : A non-destructive method to predict the welding spot diameter by monitoring process parameters}, series = {The International Journal of Advanced Manufacturing Technology}, journal = {The International Journal of Advanced Manufacturing Technology}, number = {2016}, doi = {10.1007/s00170-016-9847-y}, url = {http://nbn-resolving.de/urn:nbn:de:1111-201701081182}, pages = {1 -- 15}, year = {2018}, language = {en} } @article{l'OrteyeOrlowskiTetzlaffetal.2016, author = {l'Orteye, Annett and Orlowski, Katja and Tetzlaff, Laura and Thiers, Angelina and Schrader, Kerstin and Schrader, Thomas}, title = {An abstraction layer for assessments in physiotherapy - the Brandenburg patient profile for health services research}, series = {Physiotherapy}, volume = {Volume 102}, journal = {Physiotherapy}, number = {Supplement 1}, pages = {e212}, year = {2016}, language = {en} } @article{Vollmer2016, author = {Vollmer, Michael}, title = {Teaching Electric Fences: The Physics Behind the Brainiac Video}, series = {The Physics Teacher}, volume = {54}, journal = {The Physics Teacher}, number = {8}, issn = {0031-921X}, doi = {10.1119/1.4965273}, pages = {492 -- 496}, year = {2016}, language = {en} } @article{VollmerMoellmann2016, author = {Vollmer, Michael and M{\"o}llmann, Klaus-Peter}, title = {Music through the skin—simple demonstration of human electrical conductivity}, series = {Physics education}, volume = {51}, journal = {Physics education}, number = {3}, issn = {1361-6552 (Online)}, pages = {03402}, year = {2016}, language = {en} } @article{VollmerMoellmann2016, author = {Vollmer, Michael and M{\"o}llmann, Klaus-Peter}, title = {Fl{\"u}chtige Regenb{\"o}gen einzelner Tropfen}, series = {Physik in unserer Zeit}, volume = {47}, journal = {Physik in unserer Zeit}, number = {6}, doi = {10.1002/piuz.201601457}, pages = {305 -- 307}, year = {2016}, language = {de} } @article{VollmerMoellmann2016, author = {Vollmer, Michael and M{\"o}llmann, Klaus-Peter}, title = {Elko oder B{\"o}ller: die Polung macht's!}, series = {Physik in unserer Zeit}, volume = {47}, journal = {Physik in unserer Zeit}, number = {4}, issn = {1521-3943 (Online)}, doi = {10.1002/piuz.201601448}, pages = {200 -- 201}, year = {2016}, language = {de} } @article{VollmerMoellmann2016, author = {Vollmer, Michael and M{\"o}llmann, Klaus-Peter}, title = {Funken im Labor: kleine Br{\"u}der der Blitze}, series = {Physik in unserer Zeit}, volume = {47}, journal = {Physik in unserer Zeit}, number = {3}, issn = {1521-3943 (Online)}, doi = {10.1002/piuz.201601444}, pages = {149 -- 150}, year = {2016}, language = {de} } @article{KueglerMoellerGoeckeetal.2016, author = {K{\"u}gler, Helge and M{\"o}ller, Felix and Goecke, Sven-Frithjof and Vollertsen, Frank}, title = {Dauerfestigkeit hybridgeschweißter {\"U}berlappn{\"a}hte des Stahls 22MnB5}, series = {Materials Testing}, volume = {58}, journal = {Materials Testing}, number = {6}, issn = {2195-8572 (Online)}, doi = {https://doi.org/10.3139/120.110880}, pages = {569 -- 574}, year = {2016}, language = {de} } @article{HempelOertel2016, author = {Hempel, J. and Oertel, Christian}, title = {Parameter Optimization of Finite element tiremodels}, series = {Kautschuk, Gummi, Kunststoffe : KGK}, volume = {69}, journal = {Kautschuk, Gummi, Kunststoffe : KGK}, number = {4}, pages = {24 -- 29}, year = {2016}, language = {en} } @article{Hoeft2016, author = {H{\"o}ft, Uwe}, title = {Wissen! Mehr Bahn braucht mehr Ausbildung}, series = {Privatbahn : Magazin}, journal = {Privatbahn : Magazin}, number = {6}, issn = {1865-0163}, pages = {10 -- 13}, year = {2016}, language = {de} } @article{Hoeft2016, author = {H{\"o}ft, Uwe}, title = {Wissen bringt G{\"u}ter auf die Schiene!}, series = {Privatbahn : Magazin}, journal = {Privatbahn : Magazin}, number = {6}, issn = {1865-0163}, pages = {3}, year = {2016}, language = {de} } @article{Hoeft2016, author = {H{\"o}ft, Uwe}, title = {Mit Innovationen mehr G{\"u}ter auf die Bahn verlagern!}, series = {Privatbahn : Magazin}, journal = {Privatbahn : Magazin}, number = {5}, issn = {1865-0163}, pages = {94 -- 98}, year = {2016}, language = {de} } @article{Hoeft2016, author = {H{\"o}ft, Uwe}, title = {Sicher! Mensch und Technik im System Bahn}, series = {Privatbahn : Magazin}, journal = {Privatbahn : Magazin}, number = {5}, issn = {1865-0163}, pages = {14 -- 16}, year = {2016}, language = {de} } @article{Hoeft2016, author = {H{\"o}ft, Uwe}, title = {Innovation - f{\"u}r mehr Bahn!}, series = {Privatbahn : Magazin}, journal = {Privatbahn : Magazin}, number = {5}, issn = {1865-0163}, pages = {3}, year = {2016}, language = {de} } @article{Hoeft2016, author = {H{\"o}ft, Uwe}, title = {Mehr G{\"u}ter auf die Schiene}, series = {Privatbahn : Magazin}, journal = {Privatbahn : Magazin}, number = {4}, pages = {38 -- 42}, year = {2016}, language = {de} } @article{Hoeft2016, author = {H{\"o}ft, Uwe}, title = {Baustelle Digitalisierung}, series = {Privatbahn : Magazin}, journal = {Privatbahn : Magazin}, number = {4}, issn = {1865-0163}, pages = {3}, year = {2016}, language = {de} } @article{Hoeft2016, author = {H{\"o}ft, Uwe}, title = {Neuer Aktionsplan G{\"u}terverkehr}, series = {Privatbahn : Magazin}, journal = {Privatbahn : Magazin}, number = {1}, issn = {1865-0163}, pages = {60 -- 61}, year = {2016}, language = {de} } @article{Hoeft2016, author = {H{\"o}ft, Uwe}, title = {Norddeutscher Buchstabensalat - Y-Trasse und Alpha E}, series = {Privatbahn : Magazin}, journal = {Privatbahn : Magazin}, number = {1}, issn = {1865-0163}, pages = {20 -- 21}, year = {2016}, language = {de} } @article{Hoeft2016, author = {H{\"o}ft, Uwe}, title = {Bahn und B{\"u}rger}, series = {Privatbahn : Magazin}, journal = {Privatbahn : Magazin}, number = {1}, issn = {1865-0163}, pages = {6}, year = {2016}, language = {de} } @article{BoerschFuesselGreschetal.2016, author = {Boersch, Ingo and F{\"u}ssel, Uwe and Gresch, Christoph and Großmann, Christoph and Hoffmann, Benjamin}, title = {Data mining in resistance spot welding - A non-destructive method to predict the welding spot diameter by monitoring process parameters}, series = {The International Journal of Advanced Manufacturing Technology}, journal = {The International Journal of Advanced Manufacturing Technology}, editor = {London, Springer}, doi = {10.1007/s00170-016-9847-y}, year = {2016}, abstract = {Resistance spot welding is the dominant process in the present mass production of steel constructions without sealing requirements with single sheet thicknesses up to 3 mm. Two of the main applications of resistance spot welding are the automobile and the railway vehicle manufacturing industry. The majority of these connections has safety-related character and therefore they must not fall below a certain weld diameter. Since resistance spot welding has been established, this weld diameter has been usually used as the gold standard. Despite intensive efforts, there has not been found yet a reliable method to detect this connection quality non-destructively. Considerable amounts of money and steel sheets are wasted on making sure that the process does not result in faulty joints. The indication of the weld diameter by in-process monitoring in a reliable way would allow the quality documentation of joints during the welding process and additionally lead through demand-actuated milling cycles to a substantial decrease of electrode consumption. An annual, estimated reduction in the seven- to nine-figure range could be achieved. It has an important impact, because the economics of the process is essentially characterized by the electrode caps (Klages 24). We propose a simple and straightforward approach using data mining techniques to accurately predict the weld diameter from recorded data during the welding process. In this paper, we describe the methods used during data preprocessing and segmentation, feature extraction and selection, and model creation and validation. We achieve promising results during an analysis of more than 3000 classified welds using a model tree as a predictor with a success rate of 93 \%. In the future, we hope to validate our model with unseen welding data and implement it in a real world application.}, language = {en} } @article{Faber2016, author = {Faber, Eberhard von}, title = {Organisation und Absicherung einer industriellen IT-Produktion}, series = {Datenschutz und Datensicherheit : DuD}, volume = {40}, journal = {Datenschutz und Datensicherheit : DuD}, number = {10}, issn = {0724-4371 - 1614-0702}, doi = {10.1007/s11623-016-0676-9}, pages = {647 -- 653}, year = {2016}, language = {de} } @article{Faber2016, author = {Faber, Eberhard von}, title = {Digitalisierung, IT-Outsourcing, Informationssicherheit}, series = {Datenschutz und Datensicherheit : DuD}, volume = {40}, journal = {Datenschutz und Datensicherheit : DuD}, number = {10}, issn = {0724-4371, 1614-0702}, doi = {10.1007/s11623-016-0671-1}, pages = {269}, year = {2016}, language = {de} } @article{ZwickFrosch2016, author = {Zwick, Thomas and Frosch, Katharina}, title = {Attenuation bias when measuring inventive performance}, series = {ZEW discussion papers}, journal = {ZEW discussion papers}, number = {No. 16-014}, publisher = {ZEW}, address = {Mannheim}, pages = {14}, year = {2016}, language = {en} } @article{Vollmer2016, author = {Vollmer, Michael}, title = {Cooked to perfection: microwave ovens}, series = {Physics Education}, volume = {51}, journal = {Physics Education}, number = {3}, doi = {10.1088/0031-9120/51/3/030102}, year = {2016}, language = {en} } @article{VollmerMoellmann2016, author = {Vollmer, Michael and M{\"o}llmann, Klaus-Peter}, title = {Stehaufkreisel - a never ending story}, series = {Physik in unserer Zeit}, volume = {47}, journal = {Physik in unserer Zeit}, number = {2}, doi = {10.1002/piuz.201601435}, pages = {96 -- 97}, year = {2016}, abstract = {Abstract Stehaufkreisel sind faszinierende physikalische Spielzeuge, die scheinbar die Schwerkraft auszutricksen verm{\"o}gen: Nach anf{\"a}nglicher Rotation drehen sie sich so um, dass sie schließlich auf der fr{\"u}heren Spitze rotieren. Hochgeschwindigkeits-Videos erm{\"o}glichen es, die komplizierten mathematischen L{\"o}sungen ihrer Bewegung experimentell zu {\"u}berpr{\"u}fen.}, language = {de} }